ieGeek Baby 7S 1080P Smart Video Monitor User Guide

ieGeek Baby 7S 1080P Smart Video Monitor

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to parti5 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined bu turning the equipment off and on, the user is encouraged to try to correct the interference bu one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
4. Consult the dealer or an experienced radio/TV technician for help.

Responsible for compliance could void the user’s authority to operate this equipment.(Example-use only shielded interface cables when connecting to computer or peripheral devices).Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

1. The equipment complies with FCC Radiation exposure limits set forth for uncontrolled environment.
2. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

• FCC ID: 2AG7C-SPEED2IT(Camera)
• FCC ID: 2AG7C-BABYIM (Monitor

Watch operation videos

• Scan the QR code to subscribe and watch more step-by-step operation videos about ieGeek cameras, and stay informed with the latest in tech news and product launches.

Technical Support

• If you need help, please contact ieGeek before returning your product
• Most questions can be answered through our online support center at http://www.iegeek.com or our after-sale mailbox at service@iegeek.com.

• ieGeek.com

What’s in the Box

Overview

Download ‘ieGeek Cam’ APP

• Method 1: Download ‘ieGeek Cam’ APP from APP Store (ios) or Google Play (Android).
• Method 2: Scan the QR-Code to download the App.

Connecting And Disconnecting

Connect the Camera to the APP

The camera can be connected both to the monitor and the App. Generally, it is connected to the monitor by default. Follow the steps below to connect the camera to the App:

1. Make sure the Wi-Fi network is a 2.4 GHz network, as the camera doesn’t support 5 GHz Wi-Fi.
2. Download the ieGeek Cam App on your phone. Register a new account to log in or log in directly.
3. Use the needle to reset the camera for 5 seconds until you hear the ‘BOOGU’ beep, which means the camera has been reset, after 10-20 seconds, you will hear another beep and the red light of the camera blinks slowly.
4. Follow the step instructions on your smart phone to add the camera, and scan the QR code with your camera.

Note: You can share the opp to other people, the shared account and your account must belong to the same country.

Connect the Camera to the Monitor

• Turn on the power of the camera and the monitor, and then the camera will automatically connect to the monitor.
• Note: If the connection to each other is not successful the first time, please use the needle to reset the camera and reconnect the monitor after the second beep of the camera.
• The connection is distance-limited, so make sure the distance between the camera and the monitor no more than 300m.

Disconnect the Camera from the Monitor

1. Press Menu button on the display screen, and select > Camera Management.
2. Long press the OK button on the display screen to release the binding.

Reconnect the Camera to the Monitor

1. Press the Menu button on the display screen, and select Camera Management.
2. Long press the camera Pairing button until you hear the prompt tone.
3. Press the OK button on the display screen to start pairing.

Note: If you have problems with connection, please feel free to contact service@legeek.com for one-on-one customer service guidance.

General Settings

Set up volume

1. Press Menu button on the display screen, and select and press OK to enter the interface.
2. Press UP and DOWN direction buttons to adjust the volume.

Set up brightness

1. Press the Menu button on the display screen, select and press OK to enter the interface.
2. Press UP and DOWN direction buttons to adjust brightness.

Set up time

1. Press the Menu button on the display screen, and select Date and Time
2. Press Direction buttons to change date, time and time displaying mode.

Set up language

1. Press the Menu button on the display screen, and select Language.
2. Select the language you need.

Set up sleep mode

You can set up sleep mode to increase standby time.

1. Press the Menu button on the display screen, and select Sleep mode.
2. Select Sleep mode as 1 minute, 5 minutes, 10 minutes, 30 minutes, 60 minutes or off.

Setting camera status indicator

1. Press the Menu button on the display screen, select and press the OK button to enter the interface.
2. Press the left and right arrow keys to select on or off.

SD card

1. Press the Menu button on the display screen, and select SD card management. Then you can view the total capacity and remaining capacity of your SD card.
2. (Optional) You can format the SD card as you need, but make sure that the important data is backed up.

Note

• This product does not support hot-swapping.
• Please insert the SD card before power on or unplug it after power off.

Upgrade

1. Make sure your camera is connected to a 2.4 GHz Wi-Fi.
2. You can upgrade your camera when the upgraded alarm appears. Or press Menu button on the display screen, and select Device information to check whether it need to be upgraded.

Low battery alarm

1. When the camera is low on battery, the low battery alarm will appear on the display screen. Please charge the display as soon as possible.

Motion Tracking & Alarm Area

1. Motion Tracking: Open ieGeek Cam app, click your device, click the pinion icon in the upper right corner, select Motion Tracking and open it.
2. Alarm Area: Open ieGeek Cam app, click your device, click the pinion icon in the upper right corner, select Alarm Management>Motion Detection> Alarm Area.

FAQ

• Q: The monitor cannot be previewed properly?
  • A: Check whether the monitor has been connected to the camera.
  • If not, pair the camera and the monitor first.
• Q: What if the screen suddenly turns off and pressing any buttons doesn’t work?
  1. A: Please check if the display is out of power, try to charge it with the included adapter, then turn the monitor back on.
  2. If the cause is not a dead battery, try resetting the display with the included needle.
• Q: Can’t find the pairing button?
  • A: The pairing button is beside the power port. Long press the button for 3 seconds, and follow the step instructions of the display. (To enter the pairing interface of the display, press the Menu button on the display screen, and select > Camera Management)
• Q: How can I add devices or configure my network?
  • A: The camera can be connected to both the monitor and the application. Generally, it connects to the monitor by default. Please follow the steps below to connect the camera to the application.
  1. Make sure the Wi-Fi network is a 2.4GHz network, as the camera does not support 5GHz Wi-Fi.
  2. Download the appropriate application on your phone. Register a new account to sign in or sign in directly.
  3. Reboot the camera with the pin until the red status light flashes slowly you must connect the camera to the app within 2 minutes or you must reboot the camera again).
  4. Follow the step-by-step instructions on your smartphone to add the screen and scan the OR code with the camera.
• Q: Why does the APP show that the device is offline?
  1. A: Check whether the device is powered on normally, and observe whether the status indicator lights up normally.
  2. Check if the WiFi network is in good status and restart the router.
  3. If the distance between the device and the router is too far to get a good WiFi signal, we recommend adjusting the distance between the device and the router.
  4. Delete the device from your ieGeek Cam account and re-add it after resetting the device.
• Q: What if the WiFi used when connecting to the camera is changed?
  • A: Please delete the device from your ieGeek Cam account after resetting the camera. And add the device again with the new WiFi and password.
• Q: Why I can’t get the notifications with my cell phone App when I connect the camera to the monitor?
  • A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened. Message notification and authority confirmation in the mobile phone system has been opened. You can refer to the video on the page.
• Q: The sound and cry detection function does not work.
  • A: The sound detection interval is 1 minute, after the sound triggers the alarm, the interval is 1 minute again to avoid frequent alarms. The cry detection function can detect most babies crying. This function uses a sound filtering algorithm, so some crying may not trigger the ‘cry detection’ function. Please follow the steps below to connect the camera to the application.
• Q: Why the display or camera does not recognize the SD card?
  1. A: Please check the specification of the SD card. The display supports up to 32GB SD card, the camera supports up to 128GB SD card, we recommend using a ClO brand SD card
  2. Please check the surface of the SD card for oxidation or foreign matter such as dust, and try to wipe and clean it.
  3. Please format it to FAT32 or exFAT file system format on your computer before use, then insert it into the camera in the off state.
• Q: Why can’t I play the history video on the APP?
  1. A: Check the status of the SD card in the settings on the application to ensure that the SD card has been successfully recognized.
  2. Please ensure that files on the SD card can be accessed properly on the computer side.
  3. If there is a problem with the SD card, please try to replace a new one.
• Q: Can I set up motion tracking and alarm zones on the monitor?
  • A: No, you need to set the motion tracking and alarm area through the ieGeek Cam APP.
• Q: Why does the display make a bee sound continuously?
  • A: Because the monitor is too close to the camera, take it away from the camera more than 1 meter.
  • ***** If you encounter any other problems, please send your order number and problem to service@iegeek.com, we will deal with your issue within 24 hours.

Warranty

• Validate your warranty within 7 days and get 2-year extended warranty on your ieGeek security products.
• 2-year warranty

More Information

• www.iegeek.com
• Email:service@iegeek.com
• Sales Email: service@iegeek.com

ieGeek and ieGeek Iago are trademarks of Shenzhen Globalebuy Co., Ltd, registered in the United States and other countries. All right reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>