Zevluck PA2302-1BLK Pendant Light Fixtures User Manual
- June 17, 2024
- Zevluck
Table of Contents
Zevluck PA2302-1BLK Pendant Light Fixtures
Product Information
Specifications:
- Model Number: PA2302-1BLK
- Fixture Sizes: Three 12”, one 8”, and one 4” tubes
- After Sales Services Email: Zevluck@163.com
Product Usage Instructions
Assembly Instructions:
- Carefully unpack the fixture and all components.
- Disconnect power from the main power distribution board before installation.
- The lamp fixture includes tubes labeled (A), (B), (C), with sizes of three 12”, one 8”, and one 4” respectively. The thread attached on tubes can be removable.
- Connect the tube and adjust to the desired hanging height. Pass the wire through the tube, and screw the tubes together one by one until the desired height is achieved.
- Pass the wire through the canopy and screw the canopy into the tube.
- Detach the crossbar from the canopy by removing canopy nuts.
- Route the power cord, attach the crossbar to the J-BOX, and secure it with a Panhead screw.
- Connect the wires by twisting the lamp wire ends and power wires together (hot wire to hot wire).
Safety Instructions:
WARNING : Turn the power off (unplug from the wall outlet) before replacing the bulb. Ensure the bulb has sufficient time to cool down. Do not subject the lamp to any shock while lit as shattering of the lamp may result.
Contact Information:
For after-sales services, please contact
Zevluck@163.com for assistance.
Manufacturer’s Note:
Alecchi Lighting Co., Limited – Professional Instruction
FAQ
-
Q: How do I determine the correct hanging height for the lamp fixture?
A: Adjust the tubes by screwing them together until you achieve your desired hanging height. Make sure to pass the wire through the tubes and canopy securely. -
Q: What should I do if I encounter issues with connecting the wires?
A: Ensure that you are connecting the hot wires and follow the provided instructions carefully. If you need further assistance, contact our after- sales service email at Zevluck@163.com.
Assembly Instruction
PA2302-1BLK Installation & Wiring Instruction
- Carefully unpack the fixture and all components.
- Disconnect powder from the main power distribution board before installation.
- This lamp fixture with sizes of TUBES (A), (B), (C), three 12”, one 8”, and one 4″ respectively. The thread attached to TUBES can be removable.
- Connect TUBE and make a desired hanging height. Get wire through TUBE, and screw TUBE one by one together, until achieve your desired hanging height.
- Then get the wire through CANOPY, and screw CANOPY into TUBE.
- Detach CROSS BAR from CANOPY by removing CANOPY NUTS.
- Route power cord, attach CROSS BAR to J-BOX, and secure CROSS BAR with PANHEAD SCREW.
- Connect wire. Twist lamp wire ends and powder wires together: hot wire to hot wire, neutral wire to neutral wire, and screw on the WIRE NUT, making sure the conductors are not exposed. Connect the ground wire to CROSS BAR by using the green hex GROUND SCREW.
- Carefully tuck the wires and wire nuts into J-BOX, attach CANOPY onto CROSS BAR, and fasten by CANOPY NUTS, then make sure that the lamp fixture is secure on the wall.
- Remove the SOCKET RING from the socket, place GLASS SHADE onto the socket, then screw SOCKET RING onto the socket, making sure that GLASS SHADE is secure on the lamp fixture.
- Install bulb into the socket, recommend E26 60W MAX bulb (bulb not included).
AFTER SALES SERVICES EMAILS: Zevluck@163.com
WARNING : TURN THE POWER OFF (UNPLUG FROM THE WALL OUTLET) BEFORE
REPLACING THE BULB. MAKE SURE THE BULB HAS SUFFICIENT TIME TO COOL DOWN. DO
NOT SUBJECT THE LAMP TO ANY SHOCK WHILE LIT AS SHATTERING OF THE LAMP MAY
RESULT.
Alecchi Lighting Co., Limited