Foshan Besun Technology Co Ltd BB009 Baby Swing Chair User Manual

Foshan Besun Technology Co Ltd BB009 Baby Swing Chair

Product Introduction

Product Specification

• Product Name : 8A8YSWING CHAIR
• Model Number 88009
• Input Voltage : 100-24QV~
• Output Voltage: 5V==
• Output Current: lA
• Frequency: 50/60Hz
• Application : Children up to a weight of 9 kg or unable to sit up unaided
• Main Material : 100% fX)lyester fiber; aviation aluminum base bracket and seat frame
• Certificate: ASTM F2167-22,EN12790, EN16232

Product Features

1. Swinging from side to side, with five gears mimicking human movement.
2. Protecting baby’s spine design on the basis of human engineering.
3. Power supplied by safe 5V low voltage adapter.
4. One-button installation and disassembly, simple and convenient to use.
5. Seat part made of environmental-friendly super soft fabric and non-textile, cory, breathable and safe & washable seat fabric.
6. Made of aluminum alloy with light weight and strong hardness guaranteeing safety for baby.
7. Controlled by IMD digital touching screen or remote controller, easy to operate
8. With motion lock and safety belt for protection.
9. With built-in soft nature sounds & Bluetooth enabled for music.

Parts Instruction

Make sure that all of the following parts listed are included in the box. If any part is missing, please contact us before operating. No tools are required for assembly.

1. Plush toy*2
2. Pillow*1
3. Mosquito net with canopy*1
4. Seat frame*1
5. Remote controller
6. Adaptor1, 2 meters of USB cable1
7. Base bracket*1

Installation

For Base Bracket

• Assembling: Put the frame in the base with shape components aligned.
• Disassembling: Pull out of the sheet metal and pull up the seat frame.

For Pillow

• Installation: Attach the pillow to the top retaining ring of the seat frame and press the Velcro of the pillow.
• Removing: Pull off the Velcro to detach the pillow.

For Canopy With Toys

• Installation: Attach the toys on canopy and fasten the clasps to the pipe of the seat frame. Attach the string of mosquito net to the bottom of the seat frame by pressing the Velcro around the joint of seat frame.
• Dismantling: Put out of the clasps to remove the canopy.

Safety Belt Instruction
Place the baby into the swing and let his legs across both sides of the crotch support restraint, then turn the crotch support cover up. Adjust the seat belt on both sides and buckle up.
Note: Be sure to use the safety belt correctly when your baby lie on the baby swing for the safety of your child. Buckle off when you take your baby out of swing.

Adjustable Backrest Guidance

• Adjustable backrest:
  Hold two side steel tube,lift up to adjust recline of the backrest

• Detach backrest Press buttons on left and right side and press down to detach

• Cautions:lnfants and children are not allowed to stay in the swingduringthe above operation Above picture is for assebly installation only,product please refer to the actual.

User Instruction

Button Description

Motion Lock

• Push the motion lock down to lock the seat frame and stop movement.
• Pull the motion lock up to unlock the seat frame and the baby swing will swing again.

Remote Control

Power Supply

1. DC plug can be inserted into 100-240V ~ 50 / 60Hz AC power sup.
2. Adapter output parameters: voltage is SV and current is 1A.

WARNING

• Fall hazard: Babies have suffered skull fractures falling while in and from bouncers.
  • Use bouncer ONLY on floor
  • ALWAYS use restraints and adjust to fit snugly, even if baby falls asleep.
  • NEVER lift or carry baby in bouncer.
• Suffocation hazard: Babies have suffocated when bouncers tipped over on soft surfaces.
  • NEVER use on a bed, sofa, cushion, or other soft surface.
  • NEVER leave baby unattended.
• To prevent talls and suffocation:
  • ALWAYS use restraints and adjust to fit snugly, even if baby falls asleep.
  • STOP using bouncer when baby starts trying to sit up or has reached 9KG, whichever comes first.
  • To avoid injury ensure that children are kept away when unfolding and folding this product.
  • Do not let children play with this product.
  • Iranstormers used with the infant swing are to be regularly examined for damage to the cord, plug, enclosure and other parts, and in the event of such damage, they shall not be used.
  • The infant swing shall only be sued with the recommended transformer.
• FALL and STRANGULATION HAZARDS:
  • Infants have suffered head injuries Falling from swings and have strangled in straps
  • ALWAYS use restraints. Adjust to fit snugly.
  • STOP using product when intant attempts to climb out approximately 6 months)
  • Stay near and watch baby during use. This product is not safe for sleep or unsupervised use. it baby talls asleep, remove baby as soon as possible and place baby on a tirm, flat sleep surface such as a crib or bassinet.
  • SUFFOCATION HAZARDS: Young infants have limited head and neck control. If the seat is too upright, infant’s head can drop forward and compress the airway. ALWAYS keep swing seat fully reclined until infantis at least 4 months old AND can hold up head without help.

FCC Complance Sitatement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, it not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The base bracket should be installed and operated with minimum distance 10cm between the radiator and your body.

Clean & Maintenance

Clean

1. Clean the base bracket and seat frame with wet cloth and a mild detergent. Dry thoroughly then. Please do not use corrosive cleaner.
2. Washable fabric
   • Seat fabric: Clean it with wet cloth and a mild detergent, and dry it.
   • Canopy: Take it off and put a little cleaner; wash it gently by hands. Rinse it with clean water; and then hang it to dry, avoiding exposure to the sun.
   • Pillow: Tear the Velcro off and take the pillow off. Put a little cleaner; wash it gently by hands, and then rinse it with clean water. Hang it avoiding sun exposure.

Maintenance

1. Please check this baby swing regularly. Make sure of each part is well connected and well installed. Stop using for poor connection and connect/install it again if necessary.
2. This product contains electronic components, which shall not be used in water or in a humid environment. Please ensure the product is dry, and store it in a cool and dry place, avoiding direct sunshine for a long time.

Troubleshooting

Fast self-inspection solution below

Note: For other trouble, please contact our customer service for help.
Never disassemble and repair the swing by yourself,

After-sales Service

Thank you for purchasing our products. For your due rights and interests, please take good care of the warranty card. If there is any quality problem, please contact with the distributor.

Note:

1. From the purchase date, nomial users can enjoy one year’s free maintenance service for the circuit board components and one year’s free maintenance service for the whole machine.
2. Other consumables and accessories are not covered by the warranty.
3. Please show the warranty card and purchase certificate or invoice to be valid.

Non-warranty Coverage:

1. Improper use
2. Loss or damage of warranty card
3. Damage caused by natural disasters and other irresistible forces
   Please keep the warranty card well.

Warranty card

Documents / Resources

| Foshan Besun Technology Co Ltd BB009 Baby Swing Chair [pdf] User Manual
BB009 Baby Swing Chair, BB009, Baby Swing Chair, Swing Chair, Chair
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>