CHERRY XTRFY M64 Pro Wireless Gaming Mouse User Guide

CHERRY XTRFY M64 Pro Wireless Gaming Mouse

Specifications

• Model: M64 PRO
• Connection: Wireless/Wired
• Wireless Polling Rates: 125 Hz, 250 Hz, 500 Hz, 1000 Hz, 4000 Hz, 8000 Hz
• Wired Polling Rates: 125 Hz, 1000 Hz, 250 Hz, 500 Hz
• Adjustable CPI (Mouse Sensitivity): 400, 800, 1200, 1600, 4000, 7200, 26000, 3200
• Debounce Time Options: 2 ms, 4 ms, 8 ms, 12 ms
• Lift-Off Distance: 1 mm, 2 mm
• Sensor Modes: Pro Gaming Mode, Standard Gaming Mode, Low Power Mode

Product Usage Instructions:

1. Charging the Battery:
   Charge the battery via the USB cable. The indicator light shows the charging status.

2. Battery Level:
   To check the battery level, press and hold both side buttons +left click for 3 seconds. The color of the indicator light shows the current battery level.

3. CPI (Mouse Sensitivity):
   Set the switch into CPI mode and press the bottom button repeatedly to adjust the mouse sensitivity. The color of the indicator light shows the current setting.

4. Polling Rate:
   Set the switch into PR mode and press the bottom button repeatedly to adjust the polling rate based on whether the connection is wireless or wired.

5. Debounce Time:
   Set the switch into DT mode and press the bottom button repeatedly to adjust the debounce time.

6. Lift-Off Distance:
   Press and hold both side buttons + left and right click to change the lift- off distance between 1 mm and 2 mm.

7. Motion Sync:
   Press and hold both side buttons + scroll click to turn motion sync on or off.

8. Sensor Mode:
   Increase performance or extend battery life by switching between Pro Gaming Mode, Standard Gaming Mode, and Low Power Mode. Press and hold both side buttons + the bottom button.

9. Factory Reset:
   Press and hold both side buttons + right click to reset all settings to factory defaults.

Note : Charge the mouse via a computer USB port only.

Frequently Asked Questions (FAQ)

• Q: How do I adjust the mouse sensitivity?
  A: Set the switch into CPI mode and press the bottom button repeatedly to adjust the sensitivity.

• Q: How can I check the battery level?
  A: Press and hold both side buttons + left click for 3 seconds to see the current battery level.

• Q: What are the available polling rates?
  A: The available polling rates are 125 Hz, 250 Hz, 500 Hz, 1000 Hz for wireless mode and additional rates for wired connections.

M64 PRO
QUICK-START GUIDE

• Connect the cable to the adapter and dongle.
• Plug the USB cable into your computer.
• Move the switch from the OFF position to turn on the mouse.

CHARGING THE BATTERY **

**

Charge the battery via the USB cable. The indicator light shows charging status.

BATTERY LEVEL
To check the battery level, press and hold both side buttons + left click for 3 seconds. The color of the indicator light shows the current battery level.

CPI (MOUSE SENSITIVITY)
Set the switch into CPI mode. Then press the bottom button repeatedly to adjust the mouse sensitivity. The color of the indicator light shows the current setting.

POLLING RATE
Set the switch into PR mode. Then press the bottom button repeatedly to adjust the polling rate.

DEBOUNCE TIME
Set the switch into DT mode. Then press the bottom button repeatedly to adjust the debounce time.

LIFT-OFF DISTANCE
Press and hold both side buttons + left and right click to change the lift-off distance.

MOTION SYNC
Press and hold both side buttons + scroll click to turn motion sync on or off.

 SENSOR MODE

Increase performance or extend battery life by switching between Pro Gaming Mode, Standard Gam-ing Mode and Low Power Mode. Press and hold both side buttons + the bottom button.

FACTORY RESET

Press and hold both side buttons + right click to reset all settings.

CHARGE THE MOUSE VIA COMPUTER USB PORT ONLY.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>