CHERRY XTRFY M68 PRO Wireless Ultra Fast Mouse User Guide
- June 1, 2024
- CHERRY XTRFY
Table of Contents
CHERRY XTRFY M68 PRO Wireless Ultra Fast Mouse User Guide
-
Connect the cable to the adapter and dongle.
-
Plug the USB cable into your computer.
-
Move the switch from the OFF position to turn on the mouse.
CHARGING THE BATTERY
Charge the battery via the USB cable. The indicator light shows charging
status.
BATTERY LEVEL
To check the battery level, press and hold both side buttons + left click for
3 seconds. The color of the indicator light shows the current battery level.
< 25%
< 50%
< 75%
< 100%
CPI (MOUSE SENSITIVITY)
Set the switch into CPI mode. Then press the bottom button repeatedly to adjust the mouse sensitivity. The color of the indicator light shows the current setting.
400
800
1200
1600
3200
4000
7200
26000
POLLING RATE
Set the switch into PR mode. Then press the bottom button repeatedly to adjust the polling rate.
WIRELESS
125 H
250 Hz
500 Hz
1000 Hz
4000 Hz
8000 Hz
WIRED
125 Hz
250 Hz
500 Hz
1000 Hz
DEBOUNCE TIME
Set the switch into DT mode. Then press the bottom button repeatedly to adjust the debounce time
2 ms
4 ms
8 ms
12 ms
LIFT-OFF DISTANCE
Press and hold both side buttons + left and right click to change the lift-off
distance.
1 mm
2 mm
MOTION SYNC
Press and hold both side buttons + scroll click to turn motion sync on or off.
OFF
ON
SENSOR MODE
Increase performance or extend battery life by switching between Pro Gaming Mode, Standard Gaming Mode and Low Power Mode. Press and hold both side buttons + the bottom button.
Pro Gaming Mode
Standard Gaming Mode
Low Power Mode
FACTORY RESET
Press and hold both side buttons + right click to reset all settings.
CHARGE THE MOUSE VIA COMPUTER USB PORT ONLY
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>