CHERRY XTRFY M68 Wireless Mouse User Guide
- June 8, 2024
- CHERRY XTRFY
Table of Contents
CHERRY XTRFY M68 Wireless Mouse
Product Information
Specifications:
- Model: M68
- Connectivity: USB
- Mouse Sensitivity (CPI): 400, 800, 1200, 1600, 4000, 7200, 26000, 3200
- Polling Rate: 125 Hz, 250 Hz, 500 Hz, 1000 Hz
- Debounce Time: 2ms, 4ms, 8ms, 12ms
- Lift-Off Distance: 1mm, 2mm
Product Usage Instructions
Charging the Battery:
Charge the battery via the USB cable. The indicator light shows the
charging status.
Battery Level:
To check the battery level, press and hold both side buttons + left click
for 3 seconds. The color of the indicator light shows the current battery
level.
Mouse Sensitivity (CPI):
Set the switch into CPI mode. Then press the bottom button repeatedly to
adjust the mouse sensitivity. The color of the indicator light shows the
current setting.
Polling Rate:
Set the switch into PR mode. Then press the bottom button repeatedly to adjust
the polling rate.
Debounce Time:
Set the switch into DT mode. Then press the bottom button repeatedly to adjust
the debounce time.
Lift-Off Distance:
Press and hold both side buttons + left and right click to change the lift-
off distance.
Motion Sync:
Press and hold both side buttons + scroll click to turn motion sync on or off.
Factory Reset:
Press and hold both side buttons + right click to reset all settings.
Note: Charge the mouse via a computer USB port only.
Frequently Asked Questions (FAQ):
-
Q: How do I charge the mouse?
A: Charge the mouse via the USB cable connected to a computer’s USB port. -
Q: How do I check the battery level?
A: Press and hold both side buttons + left click for 3 seconds to check the battery level based on the indicator light color.
POWER
- Connect the cable to the adapter and dongle.
- Plug the USB cable into your computer.
- Move the switch from the OFF position to turn on the mouse.
CHARGING THE BATTERY
Charge the battery via the USB cable. The indicator light shows charging
status.
BATTERY LEVEL
To check the battery level, press and hold both side buttons + left click for
3 seconds. The color of the indicator light shows the current battery level
.
USING & LED INDICATORS
CPI (MOUSE SENSITIVITY)
Set the switch into CPI mode. Then press the bottom button repeatedly to
adjust the mouse sensitivity. The color of the indicator light shows the
current setting.
POLLING RATE
Set the switch into PR mode. Then press the bottom button repeatedly to adjust
the polling rate.
DEBOUNCE TIME
Set the switch into DT mode. Then press the bottom button repeatedly to adjust
the debounce time.
LIFT-OFF DISTANCE
Press and hold both side buttons + left and right click to change the lift-off
distance.
MOTION SYNC
Press and hold both side buttons + scroll click to turn motion sync on or off
.
FACTORY RESET
Press and hold both side buttons + right click to reset all settings.
CHARGE THE MOUSE VIA COMPUTER USB PORT ONLY.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>