CHERRY XTRFY H3 Wireless Headset User Guide

CHERRY XTRFY H3 Wireless Headset

FAQ

Frequently Asked Questions

• What should I do if the indicator light is flashing?
  • If the indicator light is flashing, it indicates that the headset or dongle is not connected. Ensure proper connection by checking the USB port and restarting the device if needed.
• How do I switch between EQ modes?
  • To switch between EQ modes, use the designated EQ mode button on the headset. A short press will cycle through the available EQ settings.
• Can I use the headset and dongle simultaneously?
  • No, the headset operates in either Bluetooth mode or Wireless dongle mode. Ensure only one mode is active at a time for optimal performance.

CONNECT YOUR HEADSET

1. Connect the microphone.
2. Plug the receiver into a USB port.
3. Turn on the headset.

BUTTONS FUNCTIONS

SHORT PRESS

1. Microphone mute.
2. Volume up.
3. Volume down.
4. Switch EQ mode.

LONG PRESS

1. Pairing/cancel pairing
2. Wireless dongle mode.
3. Bluetooth mode.
4. Power on/off.

INDICATOR LIGHTS

1. Battery status.
   • < 25% < 50% < 75% < 100%
   • = Charging.
   • = Charging complete.
2. USB-C charging port.
3. Connection status.
   • Flashing = headset not connected.
   • = Bluetooth connected.
   • = Wireless dongle connected.
4. USB dongle connection status.
   • Flashing = USB dongle not connected.
   • USB dongle connected.

For your safety

RSI stands for “Repetitive Strain Injury”. RSI arises due to small movements continuously repeated over a long period of time.

• Set up your workspace ergonomically.
• Take several short breaks, with stretching exercises if necessary.
• Change your posture often.

Device disposal

• Do not dispose of devices with this symbol in household waste.
• Dispose of the devices in accordance with statutory regulations – at your local dealer or at municipal recycling centers.

Technical Data

Federal Communications Commission (FCC) Radio Frequency Interference Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF Exposure Statement

• The device has been evaluated to meet general RF exposure requirement.
• The device can be used in portable exposure condition without restriction.

ISED Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

ISED Radiation Exposure Statement

• The device has been evaluated to meet general RF exposure requirement.
• The device can be used installed and operated with minimum distance 0mm between the radiator and your body.

EU Declaration of Conformity

• The company Cherry Europe GmbH, Auerbach/OPf., Germany hereby declares that this radio system model conforms to the European guideline 2014/53/EU.
• The full text of the EU declaration of conformity can be found under the following Internet address: www.cherry.de/compliance.

More Information

• P/N: CX-H3W
• M/N: CX-H3-R
• Rating As: 5 V/DC, max. 500 mA

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Contacts

Contact For Europe

• Cherry Europe GmbH
• Cherrystraße 291275 Auerbach/OPf. Germany
• Internet: www.cherry-world.com or www.cherry.de

For USA

• Cherry Americas, LLC
• 5732 95th Avenue Suite 850 Kenosha, WI 53144, USA
• Tel.: +1 262 942 6508
• Email: sales@cherryamericas.com
• Internet: www.cherry-world.com or www.cherry.de

UK Authorised Representative

Authorised Representative Service

• The Old Methodist Chapel Great Hucklow SK17 8RG, UK

Cherry Europe GmbH

• Cherrystraße 2 91275 Auerbach/OPf. Germany

CHERRY XTRFY H3 WIRELESS

• Designed in Sweden
• Made in China
• www.cherry-world.com
• www.xtrfy.com

References

• CHERRY - mice and keyboards for professionals
• CHERRY - mice and keyboards for professionals
• CHERRY Deutschland - Mäuse, Tastaturen und Eingabegeräte für Profis
• Produktzertifizierungen | Über CHERRY - Cherry

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>