SpeedyBee XT60 Discharger USB C Power Supply User Manual
- May 15, 2024
- SpeedyBee
Table of Contents
SpeedyBee Discharger
User Manual V1.0
SpeedyBee discharger supports to discharge Lipo (3-6S) by connecting via XT60
connector and outputting via
Type-C port, and the output power is up to 60W for devices such as laptop and
mobile phones.
Power for different Lipo:
Up to 30W for 3S, 40W for 4S and 60W for 6S Lipo.
Instruction
Short press the left button to switch the displayed value:
input voltage/output voltage/output current
Long press the left button to turn on/turn off
|
---|---
Short press the right button to switch and check voltage of each cell.
(Voltage accuracy for each cell: within ±0.05V from the actual voltage
generally. )
Long press the right button to set a targeted discharging voltage (3.80V by
default, and customization is supported with setting 3.70V as the lowest.
There will be an alarm when the voltage reaches the target. Outputting will be
cut off and a buzzer will sound.)
Please scan the QR code below to check the product page:
https://www.speedybee.com/speedybee-discharger/
Please scan the QR code below to check how to plug and unplug:
https://www.youtube.com/shorts/E-7buEnxzWs
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>