SpeedyBee TX800 5.8 GHz Antenna V2 RC FPV Racing Drone User Manual
- June 4, 2024
- SpeedyBee
Table of Contents
SpeedyBee TX800 5.8 GHz Antenna V2 RC FPV Racing Drone User Manual
Instruction Diagram
Button Operation
Long press the button for 10 seconds to unlock/lock TX800.
Short press the button to switch CH1/2/3/4/5/6/7/8.
Long press the button for 2 seconds to switch band1/2/3/4/5/6.
Long press the button for 5 seconds to switch to 25/200/400/800mW.
Support IRC Tramp Protocol
TX800 supports the IRC TRAMP protocol and the modification of video
transmission parameters through the remote control,Including frequency,
working power and so on. If your flight controller supports Bluetooth or
WiFi,You can also modify the video transmission parameters through the
SpeedyBee App.
For BetaFlight flight controller firmware above BetaFlight 4.1.0, you need upload a VTX Table to the flight controller before using the remote control to modify the video transmitter parameters normally.
download SpeedyBee-TX800(USA).json
download SpeedyBee-TX800(EU).json
For the use of the video transmitter table, please refer to this article “How
to Setup Betaflight VTX Table – SmartAudio Tramp VTX Control”by Oscar Liang.
Flight controller wiring
Note: Take UART4 for example
Betaflight 3.1 or above setting
Remote control
Frequency Table
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>