VEVOR PKHJ3012 Truck Rack 46 71inch Extendable Truck Ladder Rack User Manual
- May 15, 2024
- VEVOR
Table of Contents
VEVOR PKHJ3012 Truck Rack 46 71inch Extendable Truck Ladder Rack User
Manual
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
Safety & Warning
- Read and understand this entire manual before assembling, installing, operating, or servicing this product. Failure to follow these warnings and instructions can cause death, personal injury or damage to valuable property.
- Adhere to all Department of Transportation (D.O.T.) requirements when using this product. Use ropes and tie downs (not included) to securely hold all cargo in place.
- Do not overload the Ladder Rack. Never exceed the maximum weight capacity of 250 Lbs. (this is front and back rack combined capacity.)
- Make sure the vehicle is in a safe place for loading ladders and other cargo. Make sure the vehicle’s engine is OFF, with parking brake set, before loading or unloading the Ladder Rack.
- Do not use to hold or restrain human or animal weight in any manner.
- When assembly is complete, check and test all vehicle systems including lights and brakes; make sure no damage occured during product installation.
- This Ladder Rack is designed to carry ladders, lumber, piping, rebar, sports equipment and other long materials. Do not modify the Ladder Rack and do not use this product for purposes that it was not designed for.
- Before and after each use, check to make sure that all hardware is tightly secured. Regularly inspect for damage. If fraying or distortion is found, immediately discontinue use.
- Use common sense when working. Stay alert and concentrate when setting up and using the Ladder Rack. Never work while under the influence of alcohol, drugs or medications.
- While assembling and using the Ladder Rack keep work area clean and well lighted. Keep spectators and children out of the work area.
- Dress appropriately. Never wear loose fitting clothing or jewelry when working. Contain long hair, and keep hair, clothing and gloves away from moving parts
Specifications
| Model Series | PKHJ3012 |
|---|---|
| Maximum Load Capacity lbs） | 250 |
| Height Adjustment Range (mm) | 980-1108 |
| Width adjustment range (mm) | 490-870 |
| Gross Weight(kg) | 17.5 |
Package Contents
| Part | Description | Qty |
|---|---|---|
| 1 | Extended Cross Bar | 2 |
| 2 | Cross Bar | 2 |
| 3 | Vertical bar | 2 |
| 4 | M8×65 bolt | 14 |
| 5 | M8 Flat Washer | 18 |
| 6 | M8 Lock Nut | 18 |
| 7 | Support Bar | 2 |
| 8 | M8×35 Bolt | 4 |
| 9 | Mounting Bracket | 2 |
| 10 | M10×10 Anti-float Screw | 6 |
| 11 | Extended Bracket | 2 |
| 12 | Base Bracket | 2 |
| 13 | M8 Spring Washer | 6 |
Installation Guide:
Step 1
Install the mounting bracket (9), extended bracket (11), and base bracket (12)
on one side of the truck bed. Show as figure 2.
A. Mark the 3 drill holes on truck rack for mounting bracket(9) and base
bracket(12) and drill the holes.
B. Insert bolt (4) to extended bracket(11) and base bracket(12),Lock it
with flat washer(5)and lock nut(6).
C. The mounting bracket (9) slides over into the extended bracket(11) at
suitable position and fix it with bolts (8), flat washer(5), spring
washer(13), lock nut(6). tighten the Anti-float screw (10) at last.
Step 2
Assembling upper portion of ladder rack.
A. Assemble cross bar(2) and support Bar (7) to vertical bar (3) using 3
sets of bolt (4), washer (5) and lock nut (6). Show as figure 3.
B. Slide extended cross bar (1) into end of cross bar (2) and secure in place with bolt(4), washer(5), and lock nut(6) at suitable position, the extended cross bar (1) length can be adjustable. Show as **figure 4.
** Repeat the above two steps to assembly the upper portion of the other ladder rack.
Step 3
Assembling upper ladder rack to extended bracket(11).
A. Slide extended vertical bar (3) into extended bracket(11) and secure
in place with bolt(4), washer(5), and lock nut(6) at suitable position, the
position of extended bracket(11) can be adjustable. Show as figure 5.
B. Repeat the above steps to assemble the other upper Ladder rack to the
extended bracket(11).
EUREP UK LTD
UNIT 2264, 100 OCK STREET, ABINGDON OXFORDSHIRE ENGLAND OX14 5DH
EUREP GmbH Unterlettenweg 1a, 85051 Ingolstadt, Germany
Importer: WAITCHX
Address: 250 bus boulevard Saint-Germain 75007 Paris
Importer: FREE MOOD LTD
Address: 2 Holywell Lane, London, England, EC2A 3ET
Manufacturer: Ningbo berlin Reynold mechanical CO., Ltd
Address: NO 105. Putuoshan RD, Belin, Ningbo
Support and E-Warranty Certificate
https://www.vevor.com/support
