Adiding SJ-W6 Jewelry Cleaner Ultrasonic Machine User Manual

May 15, 2024
Adiding

Adiding SJ-W6 Jewelry Cleaner Ultrasonic Machine

Adiding-SJ-W6-Jewelry-Cleaner-Ultrasonic-Machine-
PRODUCT

Thank you for purchasing the ultrasonic cleaner. Please read these instructions carefully before using them and retain them for future reference.

IMPORTANT SAFEGUARDS

BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED WHEN USING ELECTRICAL APPLIANCES, INCLUDING THE FOLLOWING:

  • Read all instructions thoroughly.
  • To prevent hazardous operation or electric shock, do not immerse the power cord, power plug, or cleaner in water or other liquids.
  • Unplug from the outlet when not in use and before cleaning.
  • Do not use or operate the appliance with a damaged cord or plug. If the appliance malfunctions or has been damaged in any manner, unplug the appliance and return it.
  • The use of accessories or attachments not recommended by the appliance manufacturer may be hazardous or may cause malfunction.
  • Do not use outdoors.
  • Keep the power cord away from hot surfaces and do not let the cord hang over the edge of tables or counters.
  • Plug the cord into a household electrical outlet. To disconnect, press the off button, then remove the plug from the wall outlet.
  • The plug to the appliance should be attached first before plugging the cord into a wall outlet. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
    1. this device may not cause harmful interference, and
    2. this device must accept any interference received, including interference that may cause undesired operation.

SAVE THESE INSTRUCTIONS
This appliance has a polarized plug (one blade is wider than the other).To reduce the risk of electric shock, this plug was designed to fit into a polarized outlet in only one direction. If the plug does not fit fully into the outlet, do not attempt to force it or modify it in any way. Simply reverse the plug and insert. If it still does not fit, contact a qualified electrician.

These WARNINGS and CAUTIONS are intended to prevent property damage or personal injury to you and others.

  • The degree of danger or damage by the misuse of this product is indicated as follows:
  • WARNING : Indicates risk of serious injury or death.
  • CAUTION: Indicates risk of injury, household, or property damage if mishandled.

Prohibited or required actions are indicated as follows: Indicates a prohibited operation. Indicates a requirement or instruction that must be followed.

WARNING

  • Do not allow children to use or place the device in places that children cannot touch.
    • Could cause burns, electric shock, and injury.
  • People who fit with a pacemaker internally can’t use this product.
    • Could cause a sense of discomfort.
  • Do not operate the machine without filling water into the tank.
    • Overheating will cause burns or malfunctions.
  • Do not put in flammable liquid.
    • Could cause a fire.
  • Do not spray water or liquid over the device and tank.
    • Wetting the bottom will cause internal water intake, which causes electric shock, fire and malfunction.
  • Do not use the machine at any damp places.
    • Could cause electric shock, fire and malfunction.
  • Do not touch the electrical connection with any metal objects.
    • Could cause electric shock, fire, and malfunction.
  • Do not disassemble, repair, or modify the machine.
    • Could cause electric shock or injury.
  • Do not use products other than special adapters.
    • Could cause fire, or electric shock.
  • Do not touch the power plug with wet hands, especially when inserting or removing the plug.
    • Could cause fire, electric shock, and malfunction.
  • Remove the power plug from the socket if the device is not going to be used for a long time.
    • Easy to cause fire, electric shock, and malfunction.

CAUTION

  • Do not get water directly from the tap.
    • Flooding of the device and power switches will lead to malfunction.
  • Do not add anti-toxic, sterilizing or acidic solvents into the cleaning water.
    • May cause deterioration of resin and damage of stainless steel.
  • Do not clean pearls and other low-surface hardness articles.(Morse hardness of less than 8)
    • Can cause damage, discoloration, or loss of luster.
  • Do not wash rings, or necklaces with gems and diamonds for long periods.
    • May cause gems/diamonds to fall off.
  • Do not use the same socket as TV, radio, and computer.
    • Can affect the picture clarity or cause noise.
  • Prevent the device from falling and violent shaking.
    • Can cause breakage, deformation, or malfunction.

PRODUCT INTRODUCTION

Adiding-SJ-W6-Jewelry-Cleaner-Ultrasonic-Machine-FIG-1

Recommended cleaning working time mode:

  1. The duration is 90 seconds, suitable for quick washing
  2. The duration is 180 seconds, suitable for cleaning glasses and other objects;
  3. The duration is 300 seconds, suitable for cleaning jewelry and other objects;
  4. The duration is 480 seconds, suitable for cleaning watches and other objects;
  5. The duration is 600 seconds, suitable for deep cleaning.

Kindly remind : When operating the machine, please ensure that your fingers are in full contact with the touch buttons.

Basket
When a small item is to be cleaned, put the item into a plastic basket, then put the basket into the tank. In this way, friction between the item and the tank can be reduced.

Watch Holder
When cleaning the watch, please untie the watch band and put the small basket upside down to hold the watch plate.Adiding-SJ-W6-Jewelry-Cleaner-
Ultrasonic-Machine-FIG-2

Note:

  1. After 30 minutes of continuous operation of the machine, start the timing overheating protection program, indicating that the machine takes 10 minutes to cool time. Do not start. If it is running continuously for less than 30 minutes, there will be a single stop for 10 minutes in a single way, and the cumulative time will be cleared and the timing will be counted.
  2. When the overheating protection procedure is started, the display “000” is often on; during the period, the switch is triggered, and the “000” flickering 5 prompts the alarm.
  3. Flipping the power out of power will be cleared, but it is not recommended to operate this.
  4. Running without water may damage the device!
  5. A constant “humming” sound can be heard while cleaning, indicating the unit is working.

SPECIFICATIONS

Product Name| Ultrasonic Cleaner
Model| SJ-W6
Rated Voltage| 220-240V~ 50Hz (EU) / 100-120V~ 60Hz (US)
Rated Power| 35W
Frequency| 45kHz
Capacity| 1000ml
Product Size| 234x133x128mm
Tank Size| 193x87x57mm
Included| Ultrasonic Cleaner, Power Cord, Basket, Watch Hold, User Manual

HOW TO USE YOUR ULTRASONIC CLEANER

  1. Open the lid and fill the stainless steel tank with water, do not exceed the “MAX” water standard line. Put the item in the water so that the item is fully immersed.
  2. Close the lid and insert the electrical plug into the machine’s socket; plug the power plug into the power socket. After the power is turned on, the display screen shows “000”, and the machine is in standby state.
  3. Press the “TIME” key to switch to the desired cleaning time, then press the “ON/OFF”key to start the machine. During the process, short press to pause/ start the machine, and the screen countdown will be paused/started (if there is no operation for 60 seconds, it will resume the standby state). Long press the “ON/OFF” button, the machine switches back to the standby state.
  4. When the machine is running, short press the “ON/OFF” button to pause the operation, and short press the “TIME” button again to switch the cleaning time. When the time gear is not selected and the machine displays “000”, short press the “ON/OFF” button, the default is to start at the 180-second gear.
  5. When the machine is running, short press the “DEGAS” key to enter the degassing mode (working for 800 milliseconds and stop for 600 milliseconds), short press again to switch back to the normal mode, and the countdown will not be affected.
  6. When the cleaning is over, unplug the power cord and open the lid, remove the item from the cleaning tank and rinse the surface with clean water. Finally, pour out the dirty water in the washing tank, wash and wipe the washer.
    Note: Pour water from the side.

ITEMS CAN BE CLEANED

TYPE SPECIFIC ITEMS
Glasses Spectacles (without UV film) tortoise shell frame
Office Supplies Category Ruler, Scissors, Pen, Seal, etc.
Daily Supplies Toothbrush, Razor blade, Comb, etc.
Jewelry Rings, Necklace, Earrings, etc.
Tableware Metal tableware, Ceramic tableware, Dentures, etc.

NOTE

  1. Discoloration and rust of metals and precious metals cannot be removed.
  2. To clean bonding jewels, diamond necklaces and rings may cause them to fall off.
  3. It may not be possible to completely remove the remaining denture stone, dental wax, wax yellow, black spots and smoking dental wax,etc.
  4. Possible inability to clean fixed sedatives in dentures.
    TYPE| SPECIFIC ITEMS
    ---|---
    Glasses| Glasses/ Sunglasses with scratches or cracks.
    Jewelry| Jewelry with loose stones or soft/ porous stones such as pearls, emeralds, and amber.
    Watches| Automatic and mechanical watches as this will affect the accuracy of the watch.
    Others| Coating and finishing of inferior products.

WARRANTY

We are responsible for each product we sell and committed to providing you with the most wonderful shopping experience. Please kindly refer to our warranty policy below: Within 1 year of purchase, you can feel free to contact us by E-mail for proper service, If it is found to be defective under normal use.

CLEANING AND MAINTENANCE

  1. Pour water into the tank with the measuring cup, half of the tank’s standard line. After washing with a soft sponge, rinse with the cleaning water.
  2. Be careful not to seep water into the power connection at the bottom of the cleaning tank.
  3. After cleaning, please rinse items with clean water once again.
    • Don’t seep water into the power connection when cleaning.Adiding-SJ-W6-Jewelry-Cleaner-Ultrasonic-Machine-FIG-3
  4. When the stains are difficult to remove, please wet a clean cloth with water, then wipe them.
    • Be careful not to seep water into the switch and power connections.
  5. After wiping, dry the device with a dry cloth. Ensure that there is no residual water left in the tank to prevent limescale.
  6. Do not impact, or hit the device. Handle with care when moving the device.
  7. Keep the device out of children’s reach.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals