adiding 3535-5050 1000W LED Stadium Lights User Manual
- June 15, 2024
- Adiding
Table of Contents
adiding 3535-5050 1000W LED Stadium Lights User Manual
Product Introduction
Welcome to purchase our LED flood light, which is with imported high- brightness SMD 2835 led chip, with die-cast aluminum radiator with high thermal conductivity, and high effeciency constant current or constant voltage driver. Ideal product for the Stadiums, Squares, Wharf, Harbor Plaza, and similar applications.
Product Features
- The material of the heat sink is high thermal conductivity aluminum, good for heat dissipation and the surface is anti-static.
- Adjust the angle of each mold without tools, replace each mold without tools.
- No screws appeared on the front view, high end industrial design brings a more dramatic impact.
- This fixture is waterproof, dust pro of, anti corrosive.
Technical Parameters
Product/Parameter | 250W LED flood light | 500W LED flood light |
---|---|---|
Input Voltage | AC100-277V | AC100-277V |
Power Frequency | 50/60 Hz | 50/60 Hz |
Rated Power | 250 W | 500 W |
Material | aluminum | aluminum |
LED Efficacy | 150LrnM/ | |
Working Temperature | -30°- +50° | -30°- +50° |
Storing Temperature | -40°- +70° | -40°- +70° |
Working Humidity | 15%- 90% RH | 15%- 90% RH |
Beam Angle | 30° | 30° |
Color Temperature | 5000K | |
Net Weight | 6.5kg±0.5 | 18.8k00.5 |
Gross Weight | 7.3kgt0.5 | 20.6kgt0.5 |
Lamp Dimension | 296%83’134.5mm | 563.8’510136.2mm |
Package Size | L530W345H190mm | L622’W617*H211mm |
Packing including
- 1pcs LED flood light.
- 1pcs Product user manual
- 1pcs U-Shape bracket
Installation
Hole dimension for mounting.
250W bracket
500W bracket
-
According to the size chart provided on the bracket, the corresponding hole position is opened. After fix the bracket with M20 screws.
-
Remove the MI6 silicone plug, the screw with an Allen key, and rotate to the appropriate mounting angle, After push the M6 silicone plug.
All wiring finished Inside the junction box. -
Wiring, distinguishing between positive and negative poles and grounding wire.
-
If dimming is required, Take down the cabel casing when using the dimming function and connect the dimming cables according to the line mark.
Installation 2 Only Apply to 250W
-
Put a single module on the micro light stand and fix it with screws.
-
Fix the micro bracket and use the M12 for the single module Screw fixing, tightening.
-
Tighten the ti screws on the lamp holder and fix then on the pole.
Wiring Diagram
- brown/black
- blue/white
- yellow/green
Warning:
- Please read the manual carefully before installation.
- Please authorize only qualified person or professional engineer to install the fixture.
- Before installation, please check if the local voltage range is correspond with the working voltage of the fixture.
- If the fixture is damaged, it should be replaced by a qualified person.
- Please keep the fixture out of fire, electric shock, vibration.
- To avoid fire, electric, shock.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>