HOFTRONIC SR-1009SAC-HP Wireless LED Receiver 400 Watt User Manual

SR-1009SAC-HP Wireless LED Receiver 400 Watt
User Manual SR-1009SAC-HP

GENERAL INFORMATION

• 100-240VAC Wide Input and Output Voltage
• 1 Channel Output, Up to 400W
• Input and Output with Screw Terminals, Safe and Reliable
• Triac Dimmable and Mosfet Dimmable
• Trailing edge dimming
• Innovative minimum brightness setting function
• Single Wire Push Switch Input for Push Dim Function
• Great Compatibility with Universal 8V-230V~ Input Push Switches
• Great compatibility with a variety of Perfect RF series single color remote controls
• To dim and switch single color dimmable LED lamps, traditional incandescent and halogen lights
• Mini Size, Easy to be Installed into a standard 86*86mm wall box
• Radio Frequency : 868mhz

FUNCTION

PRODUCT SIZE

WIRING DIAGRAM

OPERATION

1. Pair RF receiver with RF remote
   1.1 Connect and wire up the RF receiver correctly, power on.
   1.2 Turn on the remote, click the “Learning Key” button on the receiver, immediately click zone numer, then touch color wheel on remote. If the connected LED light  on receiver flickers twice then the pairing was succesful.
   Note: One receiver can be paired with max 8 remote controls.

2. Delete the pairing
   2.1 Wire up the RF receiver correctly, power on.
   2.2. Hold the “Learning Key” button on receiver over 3 seconds until the connected LED light on the receiver flickers twice, this means it is succesfully deleted.

3. Setting minimum brightness
   Adjust brightness to a level you would like, then short press the Min.Set button, once set a minimum brightness, the light can only be dimmable between this minimum  brightness and maximum brightness.

4. Delete the minimum brightness
   Adjust the brightness to maximum level, then hold the Min.Set button for 3 seconds to delete the minimum brightness.

EXPANDABLE WITH THESE ACCESSORIES

INTENDED USE/APPLICATION
Product designed for the use in households and for other similar general applications.
MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. Product has a protective contact/terminal. Failure to connect the protective lead may lead to electric shock.
Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply  network which meets energy quality standards as prescribed by law. To maintain the proper IP protection level, the right diameter of the power cable should be selected for  the cable gland used in the product.
FUNCTIONAL CHARACTERISTICS
The product can only be used indoors
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature. Product can only be supplied by rated voltage or voltage within  the range provided. It’s forbidden to use the product with damaged protective cover. Product must not be used in unfavourable conditions, e.g. dust, water, moisture,  vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. Nondemountable product.
Not suitable
for independent repairs.
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is recommended.
This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way  as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/neutralising. Products  labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local  authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same  type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in  a given area is recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about  Hoftronic products visit www.hoftronic.com. Hoftronic shall not be responsible for any damage resulting from the failure to follow these instructions. Hoftronic reserves the  right to make changes in the manual – the current version can be downloaded at www.hoftronic.com.

DECLARATION OF CONFORMITY

DOCUMENTATION
This product has been manufactured and supplied in compliance with all relevant regulations and directives applicable to all member states of the European Union.
The product complies with all applicable regulations and rules in the country of sale.
Formal documentation such as the declaration of conformity, the safety data sheet and the product test report is available upon request.

CE DECLARATION
The product complies with the following
directives:
LVD: 2014/35/EU
EMC: 2014/30/EU
RoHS: 2011/65/EU
The complete Declaration of Conformity Document (DOC) is available upon request.

Imported by
HOF Trading B.V.
Fahrenheitstraat 11, 6003 DC Weert , The Netherlands
Made in P.R.C.
www.hoftronic.com

References

• HOFTRONIC - HOFTRONIC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>