Heavy Duty Garage Hook Kit Instruction Manual
- May 15, 2024
- GARAGE
Table of Contents
HEAVY DUTY GARAGE HOOK KIT
Assembly instructions
Package contents/parts
- Rail, x2
- J hook , x2
- Long hook, x4
- Screw, x16
- Wall anchor, x16
How to install:
Step1: Mark the height from the ground.
Step2: Place the top and bottom of the rail correctly.
Step3: Locate the holes on the wall with a level.
Step4: Drill the screws into the wall.
( Ps: Hole Depth:40mm /1.574inch, Drill diameter:7.5mm /0.295inch )
Step5: Snap the hooks on the rail.
Step6: Relocate the hooks easily on the rail.
Storage
All parts must be completely dry before being stored.
Always store the hook kit in a dry area.
Protect the hook kits from direct sunlight store the hook kits so that it is
not accessible to children.
Technical data
Material
Rail:| Aluminum 6063
Hook:| Steel Q195
Maximum loading capacity:
| Three rails : | 150kgs |
|---|---|
| J hook : | 20kgs |
| Long hook: | 20kgs |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>