GARAGE DOORS ONLINE GSW 40-L Carteck Side Hinged Garage Doors Instruction Manual
- June 3, 2024
- GARAGE DOORS ONLINE
Table of Contents
GARAGE DOORS ONLINE GSW 40-L Carteck Side Hinged Garage Doors Instruction
Manual
GEORGIAN DOORS
Horizontal doors have 2 columns of features as standard arranged 1/2 – 1/2,
changing to an asymmetric three columns at the width shown below. 1/2 – 1/2
vertical doors have 2 rows of features as standard changing to three at the
height shown right.
SPECIFICATION
DOOR:
Door leaves are fabricated using 40mm thick Car Teck panels with an extruded
aluminum perimeter frame and integral seals. Doors with the optional standard
threshold profile have an EPDM black threshold seal at the base. Each leaf is
fitted with two or three (dependent on size) surface fixed hinges.
The door frame is a an extruded aluminum profile with mitered corners and integral seals, for details refer to technical leaflet. A 3-part stepped aluminum threshold is also included. 10mm tolerance should be allowed to facilitate frame squaring during installation.
HARDWARE:
Hardware comprises of a DIN standard CE marked European sash lock and a
pair of stainless steel round bar lever handles on 50mm diameter roses. A
Euro-profile cylinder and thumb turn with stainless steel escutcheons is
included as standard (double cylinder, key both sides is available as an
option if required). Two security keys are supplied with each cylinder. The
inactive leaf is fitted with top and bottom recessed lever action flush bolts.
A stay is fitted t o each leaf to hold the door in the open position, any leaf
below 780mm wide (including asymmetric side hinged doors) will not have a
stay. Stainless steel** needs regular cleaning or will stain, especially in
areas of high salt content.
COLOUR:
The door frame and window frame colour shade and surface lustre will show a
variance from the panel finish as the base material and coating methods are
different. Where differing materials and process are adopted, such as side
hinged GSW40L garage doors, their maybe some colour matching variations.
Differing light conditions may furt her reduce or highlight this effect. The
colors RAL9006 and 9007 pose particular problems when colour matching, more
information is available via the sales office.
RAL references for colors are provided as a guide only to the nearest similar
RAL colour. Colours will not match to other RAL finishes due to different
coating processes, gloss levels, substrates and textures. Similarly, special
RAL, BS or other colours will not be a precise match.
For how to care for stainless steel see: www.teckentrup.co.uk/garage-
doors/frequently-asked-questions-faqs
DIMENSIONS AND CLEARANCES
Active leaf Din LH as Shown
Installation behind the soffit, only inward opening
Installation within the soffit, inward or outward opening
CLEARANCES
IMPORTANT
When doors are ordered as a structural opening size, Teckentrup UK will
deduct 20mm from the width and 10mm from the height for coursing tolerance. If
this is more tolerance than you wish, please state the over-frame dimension
you require.
The section height and the height of the handle ‘x’ depend on the
actualdoor height and construction of the door.
Installation behind the soffit, only inward opening
Support
http://www.garagedoorsonline.co.uk/
References
- 463888garagedoorsonline.co.ukgaragedoorsonline.co
- garagedoorsonline.co
- Frequently Asked Questions (FAQs)