PHOENIX GOLD ZDAPGM1 DSP Power Up Kit Instruction Manual
- June 13, 2024
- PHOENIX GOLD
Table of Contents
PHOENIX GOLD ZDAPGM1 DSP Power Up Kit
Product Information
- Product Name: ZDAPGM1
- Components: SOT Cable, ZDA4.6, ZDAISOT2
- Installation Tools Required: PZ2 Screwdriver, 7mm Wrench, Plastic Pry Tool
- Compatible Vehicle: Opel Astra J 03/2015 Basic Sound System
- ( Note: Some differences may occur between different car and year models)
Tools Required
Vehicle used for installation:
- Opel Astra J 03/2015
- Basic Sound System
Some differences may occur between different car and year models.
Installation
Tools required
- Stereo removal
- Pull up the gear lever panel
- Pull up and put away the panel
- Remove the top of the tray
Tools required
- Pull up the plastic tray
- Pull up the gear lever panel
- Unscrew the two screws
- Unscrew the first screw
- Unscrew the other screw
- Pull off the bottom part
- Pull off the top part
- Pull the entire stereo panel off
Tools required
- Loosen the left fan wheel panel
- Loosen the right fan wheel panel
- Unscrew the four bolt
- Pull out the panel
- Remove the black connector
- Remove the grey connector
- Remove the other two connectors
- Remove the first connector
Tools required
- Remove the other connector
- Unscrew the two bolts
- Pull out the stereo
- Remove the quadlock connector
Tools required
- Quadlock connector removed
- Connect the SOT cable
- Connect ZDAISOT
- Remove the passenger side panel
- Pull the panel towards you
- Put the panel aside
- Route ZDAISOT behind the stereo
- Route ZDAISOT to the floor
Tools required
- Connect SOT cable to stereo
- Route ZDAISOT under the carpet
- Install and screw ZDA4.6 in place
- Screw back stereo
Tools required:
- Reassemble stereo in reverse
- Physical install is now complete
- Go to phoenixgold-eu.com/downloads/ and download the ZDA4.6 software and your Phoenix Gold sound curve
Software Installation
Tools required
- Press “Program”
- Press “Load PC Presets File”
- Go to your saved location and choose your Phoenix Gold sound curve, then click “Open”
- Press “Program”
- Press “Save As Machine Preset”
- Press “Save”
- Press “OK”. The sound curve is now installed and saved to the ZDA4.6.
On Behalf of the Phoenix Gold team, Thank you for choosing us!
Your installation is complete and we hope that your new upgraded system will bring you joy and happiness for many years to come when listening to your favorite music. As always, our goal is bringing you The Gold Standard in Sound.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>