Garage Gator 67010 Jeep Roof Lift Kit Instruction Manual
- October 30, 2023
- GaRaGE GaToR
Table of Contents
Garage Gator 67010 Jeep Roof Lift Kit
YOUR BOX CONTAINS
-
2 x Straps
-
4 x Bolts and nuts
REQUIRED
Garage Gator / Storage Elevator 220/275 lb
STEP 1
You must have previously installed the motorized elevator with support bar.
Your elevator should be installed at least 3 ft. from the back wall and
parallel to the orientation in which your vehicule is park. (You can also
install perpendicular to your Jeep, but you will need to remove the Jeep top
and place it on the floor below your lift.
STEP 2
Slip straps onto the bar using the loops.
STEP 3
Position Jeep roof under the bar. (if hoisting the roof directly from your
Jeep, please watch our video).
STEP 4
Attach each strap to the foreward-and-reward-most roof holes with the
provided hardware as directed in the below diagram.
STEP 5
Tighten each strap while keeping the support bar as centered as possible
above the roof. Raise the roof to verify that it is level. If needed, adjust
straps to level roof.
Customer Support
FOR MORE INFORMATION
PLEASE CALL 1-888-691-2944
EMAILINFO@PROSLAT.COM
OR VISIT PROSLAT.COM
Documents / Resources
|
Garage Gator 67010 Jeep Roof Lift
Kit
[pdf] Instruction Manual
67010 Jeep Roof Lift Kit, 67010, Jeep Roof Lift Kit, Lift Kit, Kit
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>