BATO BFS-6118MBK Freestanding Solid Surface Bath Installation Guide

BATO BFS-6118MBK Freestanding Solid Surface Bath

Specifications

• Model: BFS-6118MBK
• Dimensions: 541mm x 712mm x 750mm
• Weight: 1119mm
• Material: Acrylic

Product Usage Instructions

Installation

1. Place the bathtub in the desired position on the floor.
2. Use the required tools provided: Drill, Level, Pencil, Utility Knife, and Drill Bit (3/16 inches).
3. Follow the installation guide provided in the manual for proper installation steps.

Testing and Sealing

• Remove the bathtub and fill it with water to test drain installation for leaks.
• Apply silicone sealer around all external joints and allow it to dry for a minimum of 24 hours before use.

Care and Cleaning

• Regularly clean with mild detergents or warm soapy water using a non-abrasive cloth or sponge.
• Rinse surfaces after cleaning and test cleaning products on a small area before full use.

FAQ

• What does the warranty cover?
  The warranty covers BATO bathtubs for 10 years from the date of purchase for residential and domestic use.

• What are the exclusions from the warranty?
  Exclusions from the warranty include improper use, damage from corrosive cleaners, steel wool, acetone, dry cleaning products, or ammonia compounds.

• How to repair black and white surfaces?

  • Black Surface Repair: Ensure the surface is dry and clean, lightly dab the repair pen on the damaged area, and let it dry for 30 minutes.
  • White Surface Repair: Clean the surface with water, polish with 800 grit sandpaper, and wipe off remaining wax with a dry cloth.

GUIDED ’ INSTALLATION
BFS-6118MBK
INSTALLATION GUIDE

ATTENTION

BEFORE STARTING

Our products are carefully inspected and package in our warehouse for shipping. Only remove the protective film at the very end of the installation to ensure maximum protection. (Except where bathtub surface will be in permanent contact with another surface (I.E., Wall / faucet, etc)). It is very important that you carefully inspect the product before installation. If a product is defective, please contact the company before installation. The installer will be held responsible for any breakage or damages following the use of a defective product. To protect the unit during installation, place a cardboard in the bottom of the bathtub. Verify that the bathroom floor is leveled and strong enough to support a minimum weight of 1500 lbs, reinforce the existing flooring if needed. It is IMPORTANT to verify the drain location (it can be place of the left, middle of right) before drilling a hole in the floor. It is important to provide an access near the plumbing, pump and/or control boxes allowing to easily disassemble and/or repair these components. The whirlpool/Therapeutic systems must be connected before the final installation. (see the installation and user’s guide for whirlpool/therapeutic system).

REQUIRED TOOLS

IMPORTANT

• INSTRUCTIONS ARE TO BE PRESERVED BY FINAL USER.
• READ CAREFULLY BEFORE PROCEEDING WITH INSTALLATION.
• MAKE SURE THAT THE PLUMBING IS DONE BY A CERTIFIED PLUMBER.
• MAKE SURE THAT YOU RESPECT THE PLUMBING CODE AND/OR BUILDING CODE OF YOUR REGION.

INSTALLATION INSTRUCTIONS

It is highly recommended to be two people for the installation.

1. Put the tub in the right position on the floor.

2. Trace its outline on the floor with an erasable marker.

3. Remove the tub.
   

4. Carefully set bathtub into position and rough in your drain pipe (1 1/2”) accordingly.

5. Drain pipe is extendable and adjustable to meet your needs (drain pipe not included with tub).

6. Place the tub in its final position. Fill it up with water and then empty it. In order to test the drain installation. Make sure there is no leaking.

7. Apply silicone on the 4 sides of the tub.

Apply silicone sealer around all external joints of the bath and allow it to dry for at least 24 hours.

CARE AND CLEANING

For regular cleaning use only mild detergents or warm soapy water. Use only non-abrasive cloth or sponge. Always rinse surfaces after cleaning. Before cleaning this product with cleaning products, test a small inconspicuous area.

Repair Instructions

For black surface repair

1. Make sure the surface is dry and clean.
2. Remove the cap of the repair pen.
3. Lightly dab the tip of the pen on the dented or scratched area.
4. Let it dry for 30 minutes.

For white surface repair

1. Clean the surface with water, make sure no dust remains.
2. Using water, polish the area starting with 800 grit sand paper.
3. Wipe up the remaining wax with clean dry cloth.

LIMITED WARRANTY

• By choosing a BATO product, a leader in the plumbing industry distributing its products across North America, you are sure to make the right choice. On top of the quality materials that are used to make their products, BATO’s advanced manufacturing processes also benefit its products’ quality and longevity. To attest to this, they decided to offer their customers a beneficial warranty.
• We certify that our products will meet your needs with their style, but also with their manufacturing quality. To make sure that they are reliable and safe, each product was carefully inspected, tested and approved during the quality control process that is in place.

To whom does this warranty apply?

• BATO offers a 10-year limited warranty from the date of purchase, exclusive to the first buyer as long as he/she resides in the same property. This warranty applies to all BATO bathtubs.
• The warranty is intended for residential and/or domestic use.

Care instructions
Clean the product with water and a mild detergent. Abrasive or corrosive cleaners, steel wool, acetone, dry cleaning products or ammonia compounds must never be used to clean the product. If a bath mat is used, it must be removed right after each use. We recommend the use of cleaning products that are made for acrylic specifically.

What is covered by the warranty?

• *From the date of purchase.
• Should there be any manufacturing defects that are not covered by the warranty, the product will need to be inspected prior to following through with the claim. Without that verification, the brand will assume no charge and/or responsibility.

What are the exclusions?

• This warranty is applicable on all BATO products purchased on or after December 1st, 2021.
• The warranty doesn’t apply if the product is damaged as a result of misuse, overuse or non-residential use, neglect, lack of maintenance, or the use of corrosive or abrasive products, regardless of the person who did those damages. The warranty does not cover shipping and labour costs. The warranty does not apply to the normal tear and wear of the goods.
• The warranty doesn’t cover the damages caused by the acts of God or breakage resulting from a shock or mishandling, regardless of the part played by the buyer or the installer. It also excludes the damages caused by an improper installation.
• BATO doesn’t cover damages caused by a water leak, even if they result directly or indirectly from a product defect, except where the applicable legislation does not allow any exclusion or limitation following indirect or consequential damages.
• It is fair to say that if the product has a manufacturing defect, it will show as soon as it is installed or shortly after. However, a leak caused by an improper installation could happen a long time after. Therefore, it is strongly advised to have it done by a professional.
• All warranty claims must include the invoice copy.
• Should a part or product component be defective or the finish damaged following a normal domestic and residential use, BATO commits to replacing the defective part(s) to the first buyer only. BATO could also, in its sole discretion, commit to offer a full replacement. No indemnity shall be claimed for loss of enjoyment of life, loss of income or losses caused by water.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>