BATO 83-1517 59 Freestanding Bathtub Installation Guide
- May 15, 2024
- BATO
Table of Contents
BATO 83-1517 59 Freestanding Bathtub
Specifications
- Model Number: 83-1517
- Water Capacity: 56 Gallon / 213 Liter
Accessories Included
- Adapter – 1 piece
- Plastic Pipe (Tuyau en Plastique) – 1 piece
Product Usage Instructions
- Place the bathtub in its final position.
- Fill it with water.
- Empty the bathtub to ensure there are no leaks.
Frequently Asked Questions (FAQ)
-
Q: How do I assemble the adapter and plastic pipe?
A: The adapter and plastic pipe can be easily assembled by connecting the parts securely. -
Q: Can this bathtub be used outdoors?
A: It is recommended to use the bathtub indoors to avoid exposure to weather elements. -
Q: How should I clean the bathtub after use?
A: To clean the bathtub, use a mild soap and water solution, rinse thoroughly, and allow it to dry completely before storage.
ATTENTION
BEFORE STARTING
Our products are carefully inspected and package in our warehouse for shipping. Only remove the protective film at the very end of the installation to ensure maximum protection. (Except where the bathtub surface will be in permanent contact with another suface (I.E., Wall / faucet, etc)). It is very important that you carefully inspect the product before installation. If a product is defective, please contact the compagny before installation. The installer will be held responsible for any breakge or damages following the use of a defective product. To protect the unit during installation, place cardboard in the bottom of the bathtub. Verify that the bathroom floor is leveled and strong enough to support a minimum weight of 1500 lbs, reinforce the existing flooring if needed. It is IMPORTANT to verify the drain location (it can be placed of the left, middle of right) before drilling a hole in the floor. It is important to provide an access near the plumbing, pump and/or control boxes allowing to easily disassemble and/or repair these components. The whirlpool/Therapeutic systems must be connected before the final installation. (see the installation and user’s guide for whirpool/therapeutic system).
REQUIRED TOOLS
IMPORTANT
WATER CAPACITY: 56Gallon / 213Liter
INSTRUCTIONS ARE TO BE PRESERVED BY FINAL USER. READ CAREFULLY BEFORE PROCEEDING WITH INSTALLATION.
ACCESSORIES
Installation
- It is highly recommended to be two people for the installation. *
- Il est fortement recommandé d’être deux personnes pour l’installation.
-
Put the tub in the right position on the floor. Chock and ariuet the lone with tha lovo i
-
Trace its outline on the floor with an erasable marker.
-
Remove the tub.
-
Install the plastic pipe by screwing
-
Install the plastic pipe by screwing it to the tub drain outlet, when it is done put some silicone.
-
Place the tub in its final position. Fill it up with water and then empty In order to test the drain installation. Make sure there is no leaking.
-
Apply silicone on the 4 sides of the tub.
Apply
silicone sealer around all external joints of the bath and leave and allow it
to dry for at least 24 hours.
CARE AND CLEANING
For regular cleaning use only mild detergents or warm soapy water. Use only non-abrasive cloth or sponge. Always rinse surfaces after cleaning. Before cleaning this productwith cleaning products, test a small inconspicuous area.
LIMITED WARRANTY
By choosing a BATO product, a leader in the plumbing industry distributing its
products across North America, you are sure to make the right choice. On top
of the quality materials that are used to make their products, BATO’s advanced
manufacturing processes also benefit its products’ quality and longevity. To
attest to this, they decided to offer their customers a beneficial warranty.
We certify that our products will meet your needs with their style, but also
with their manufacturing quality. To make sure that they are reliable and
safe, each product was carefully inspected, tested and approved during the
quality control process that is in place.
To whom does this warranty apply?
BATO offers a 10-year limited warranty from the date of purchase, exclusive to
the first buyer as long as he/she resides in the same property. This warranty
applies to all BATO bathtubs. The warranty is intended for residential and/or
domestic use.
Care instructions
Clean the product with water and a mild detergent. Abrasive or corrosive
cleaners, steel wool, acetone, dry cleaning products or ammonia compounds must
never be used to clean the product. If a bath mat is used, it must be removed
right after each use. We recommend the use of cleaning products that are made
for acrylic specifically.
What is covered by the warranty?
Should there be any manufacturing defects that are not covered by the warranty, the product will need to be inspected prior to following through with the claim. Without that verification, the brand will assume no charge and/or responsibility.
What are the exclusions?
- This warranty is applicable on all BATO products purchased on or after January 1st, 2018.
- The warranty doesn’t apply if the product is damaged as a result of misuse, overuse or non-residential use, neglect, lack of maintenance, or the use of corrosive or abrasive products, regardless of the person who did those damages. The warranty does not cover shipping and labour costs. The warranty does not apply to the normal tear and wear of the goods.
- The warranty doesn’t cover the damages caused by the acts of God or breakage resulting from a shock or mishandling, regardless of the part played by the buyer or the installer. It also excludes the damages caused by an improper installation.
- BATO doesn’t cover damages caused by a water leak, even if they result directly or indirectly from a product defect, except where the applicable legislation does not allow any exclusion or limitation following indirect or consequential damages.
- It is fair to say that if the product has a manufacturing defect, it will show as soon as it is installed or shortly after. However, a leak caused by an improper installation could happen a long time after. Therefore, it is strongly advised to have it done by a professional.
- All warranty claims must include the invoice copy.
- Should a part or product component be defective or the finish damaged following a normal domestic and residential use, BATO commits to replacing the defective part(s) to the first buyer only. BATO could also, in its sole discretion, commit to offer a full replacement. No indemnity shall be claimed for loss of enjoyment of life, loss of income or losses caused by water.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>