BATO BFS-0688 White 63 Clawfoot Bath with Chrome Accents Installation Guide
- June 17, 2024
- BATO
Table of Contents
Installation Guide BFS-0688
INSTALLATION GUIDE
BFS-0688 White 63 Clawfoot Bath with Chrome Accents
CUPC FILE NO.:
8906
CERTIFIED MODEL: JL-1-X3-YZ-Z2-W
IMPORTANT
INSTRUCTIONS ARE TO BE PRESERVED BY FINAL USER.
READ CAREFULLY BEFORE PROCEEDING WITH INSTALLATION.
MAKE SURE THAT THE PLUMBING IS DONE BY A CERTIFIED PLUMBER.
MAKE SURE THAT YOU RESPECT THE PLUMBING CODE AND/OR BUILDING CODE OF YOUR
REGION.
WARNING
-
Risk of personal injury. Acrylic bath tubs are heavy.
Obtain sufficient help to carefully lift or move the bath tub. -
Rick of property damage. Make sure that a waterlight seal exists on all bath drain connections.
All installations must comply with council and local authority by-laws. It is
the responsability of the installer to ensure that the waste is made
watertight by means of silicone sealant or caulking compound.
NOTE: Bath can be installed after the wall is completed. Bath drain
supplies should be arranged preliminarily according to the selected bath.
REQUIRED TOOLS
BEFORE INSTALLATION
- Before installation check that all fittings have been supplied.
- Assembled bath on a mat to protect against damage to bath surface.
- This product requires a two person lift-use proper lifting techniques.
- Installation and waste connection please consult a qualified tradesmen.
- Folllow each step in turn.
Please check you have all of these items in the box.
INSTALLATION PROCEDURES
-
Turn the bath upside down and remove the nuts and washers.
-
Attach the brackets to the base of the bath and secure with nuts and washers supplied with bath.
-
Align the feet with the location holes in the fixing brackets and secure with the bolts and washers supplied with the feet.
-
Turn the bath over and level using the feet adjusters.
Lock the feet into pace using a spanner. Apply a good amount of silicon to the base of the feet to prevent the bath from moving. -
Connect the waste and overflow to the bath and then attach to the household pipework.
AFTER INSTALLATION
Allow any silicon used around the bath & waste fitting to dry for 24 hours before running water to check for leaks.
CARE & CLEANING
- Use a soft cloth or sponge for cleaning. Do not use any scouring pads like pot cleaners etc. as this will dull the surface.
- Use mild soap and water for everyday use.
- Do not use any abrasive cleaning materials.
- Do not use any disinfectants, aerosol cleaners, ammonia concentrates etc.
- Every few months give your bath a light polish with acrylic polish to restore the original sheen.
LIMITED WARRANTY
By choosing a BATO product, a leader in the plumbing industry distributing its
products across North America, you are sure to make the right choice. On top
of the quality materials that are used to make their products, BATO’s advanced
manufacturing processes also benefit its products’ quality and longevity. To
attest to this, they decided to offer their customers a beneficial warranty.
We certify that our products will meet your needs with their style, but also
with their manufacturing quality. To make sure that they are reliable and
safe, each product was carefully inspected, tested and approved during the
quality control process that is in place.
To whom does this warranty apply?
BATO offers a 10-year limited warranty from the date of purchase, exclusive to
the first buyer as long as he/she resides in the same property. This warranty
applies to all BATO bathtubs. The warranty is intended for residential and/or
domestic use.
Care instructions
Clean the product with water and a mild detergent. Abrasive or corrosive
cleaners, steel wool, acetone, dry cleaning products or ammonia compounds must
never be used to clean the product. If a bath mat is used, it must be removed
right after each use. We recommend the use of cleaning products that are made
for acrylic specifically.
What is covered by the warranty?
| 1 Year| 2 Years| **10 Years***
---|---|---|---
Bathtubs| Mechanical drains, automatic drains
and pushbutton drains| –| Acrylic and fiberglass against manufacturing defects
Systems and engines| –| Whirlpool jets, bathing jets, pump,
air blower, pneumatic and electrical
controls| –
*From the date of purchase.
Should there be any manufacturing defects that are not covered by the
warranty, the product will need to be inspected prior to following through
with the claim. Without that verification, the brand will assume no charge
and/or responsibility.
What are the exclusions?
This warranty is applicable on all BATO products purchased on or after
December 1st, 2021.
The warranty doesn’t apply if the product is damaged as a result of misuse,
overuse or non-residential use, neglect, lack of maintenance, or the use of
corrosive or abrasive products, regardless of the person who did those
damages. The warranty does not cover shipping and labour costs. The warranty
does not apply to the normal tear and wear of the goods.
The warranty doesn’t cover the damages caused by the acts of God or breakage
resulting from a shock or mishandling, regardless of the part played by the
buyer or the installer. It also excludes the damages caused by an improper
installation.
BATO doesn’t cover damages caused by a water leak, even if they result
directly or indirectly from a product defect, except where the applicable
legislation does not allow any exclusion or limitation following indirect or
consequential damages.
It is fair to say that if the product has a manufacturing defect, it will show
as soon as it is installed or shortly after. However, a leak caused by an
improper installation could happen a long time after. Therefore, it is
strongly advised to have it done by a professional.
All warranty claims must include the invoice copy.
Should a part or product component be defective or the finish damaged
following a normal domestic and residential use, BATO commits to replacing the
defective part(s) to the first buyer only. BATO could also, in its sole
discretion, commit to offer a full replacement. No indemnity shall be claimed
for loss of enjoyment of life, loss of income or losses caused by water.
Rev. April 05, 2023
Documents / Resources
| BATO
BFS-0688 White 63 Clawfoot Bath with Chrome
Accents
[pdf] Installation Guide
BFS-0688 White 63 Clawfoot Bath with Chrome Accents, BFS-0688, White 63
Clawfoot Bath with Chrome Accents, Clawfoot Bath with Chrome Accents, Chrome
Accents
---|---