YeeSite DJ Disco Lights with Stand User Manual
- May 15, 2024
- YeeSite
Table of Contents
YeeSite DJ Disco Lights with Stand User Manual
IMPORTANT NOTE: Electric products must not be put into household waste.Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed.
Before You Begin
What In the Box:
- 1 x DJ Light with Stand
- 1 x Tripod Stand
- 1 x Remote Controller
- 1 x User Manual
Unpacking Instructions:
-
Thank you for purchasing this product, we are sure that it will serve you for many years to come.
Before your initial start-up, please make sure that there is no damage caused during transportation. -
Should there be any damage, consult your dealer and do not use the equipment.
-
To maintain the equipment in good working condition and to ensure safe operation, it is necessary for the user to follow the safety instructions and warning notes written in this manuall.
-
To avoid the risk of accidents, keep all packaging out of the reach of children.
-
Please note that damages caused by user modifications to this equipment are nat subject to warranty
Claims:
If the box or the contents (products and accessories) appear damaged from shipping, or show signs of mishandling, notify the carrier immediately, and contact Amazon customer support and request them for the new replacement. Amazon customer support team sure will definitely help you with this.
You may contact Amazon customer support team on the below link:https://www.amazon.com/gp/help/customer/contact-us
If your order is urgent, here are Amazon customer service phone numbers as well:
U.S. and Canada: 1-866-216-1072
If no response from Amazon, you can ask seller customer service directly:
odis_yeesite@outlook.com
Disclaimer:
YeeSite believes that the information contained in this manual is accurate in all respects. However, YeeSite assumes no responsibility and specifically disclaims any and all liability to any party for any loss, damage or disruption caused by any errors or omissions in this document, whether such errors or omissions result from negligence, accident or any other cause. YeeSite reserves the right to revise the content of this document without any obligation to notify any person or company of such revision, however, YeeSite has no obligation to make, and does not commit to make, any such revisions.
Safety Notes:
CAUTION!
KEEP THIS EQUIPMENT AWAY FROM RAIN, MOISTURE AND LIQUIDS.
CAUTION!
TAKE CARE USING THIS EQUIPMENT! HIGH VOLTAGE-RISK OF ELECTRIC SHOCK!!
Please read the following Safety Notes carefully before working with the product. Than notes include important Safety Information about installation, usage and maintenance.
-
Never let the power cable come into contact with other cables. Handle the power cable and all mains voltage connections with particular caution!
-
Never remove warning or informative labels from the unit.
-
Do not open the equipment and do not modify the unit.
-
Do not connect this equipment to a dimmer pack.
-
Do not switch the equipment on and off in short intervals,as this will reduce the system’s life.
-
Do not expose to flammable sources,liquids or gases.
-
Always disconnect the power from the mains when equipment is not in use or before cleaning!
Only handle the power-cable by the plug. Never pull out the plug by pulling the power-cable. -
Make sure that the available mains supply voltage is between 100~240V AC, 50/60Hz.
-
Make sure that the power cable is never crimped or damaged. Check the equipment and the power cable periodically.
-
lf the equipment is dropped or damaged, disconnect the mains power supply immediately and have a qualified engineer inspect the equipment before operating again.
-
This unit is not intended for fixed installation.
-
lf the equipment has been exposed to drastic temperature fluctuation (e.g.after transportation), do not connect power or switch it on immediately.The arising condensation might damage the equipment.Leave the equipment switched off until it has reached room temperature.
-
lf your product fails to function correctly,stop use immediately.Pack the unit securely (preferably in the original packing material), and return it to your pro light dealer for service.
-
Only use fuses of same type and rating.
-
Repairs, servicing and power connection must only becarried out by a qualified technician.
THIS UNIT CONTAINS NO USER SERVICEABLE PARTS.. -
This lighting fixture is for professional use only – it is not designed for or suitable for household use.The product must be installed by a qualified technician in accordance with local territory regulations.The safety of the installation is the responsibility of the installer. The fixture presents risks of severe injury or death due to fire hazards, electric shock and falls.
Introduction
Product Overview & Size
Setup
AC Power:
YeeSite Party LED Effect Light has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.
Mounting :
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
Orientation:
The YeeSite Party LED Effect Light may be mounted in any position; however,
make sure adequate ventilation is provided around the product.
Operation
Remote Control Function
- ON/OFF
- Auto Mode(Par Light & Disco Ball)
- Auto Mode(Par Light)
- Auto Mode(Disco Ball)
- Color Navigation +/-(Valid in “ATUO-PAR” and “AUTO-LED”)
- Slow down or speed up rotating ball speed
- Increase/Decrease adjusting sound sensitivity
- Sound Mote(Par Light & Disco Ball)
- Sound Mote(Par Light)
- Sound Mote(Disco Ball)
- Color Jump Lighting Effect(Par Light)
- Color Fade Lighting Effect(Par Light)
- Color Strobe Lighting Effect(Par Light)
Remote controller must towards the IR signal receiver without barriers when operating.
Remote control distance should less than 5m and pls allow 1-second delay during changing lighting patterns.
TECHNICAL SPECIFICATIONS
Voltage: AC 110-240V,50/60Hz
Power: 30W
LED PAR: 14PCS/3W RGB LED
LED Disco Ball: 2PCS/9W RGB LED
Laser Power: 30mW 532nm,100mW 650nm
Weight: 15.1×3. x2.1(inch)
Product Size: 736.6g
Package Size: 20×9.8×4.72(inch)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>