YeeSite 144LEDs RGB LED Stage Light Bar User Manual

June 15, 2024
YeeSite

YeeSite 144LEDs RGB LED Stage Light Bar

YeeSite-144LEDs-RGB LED-Stage-Light-Bar-product

WARNING
FOR YOUR OWN SAFET Y, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP!

CAUTION: Keep this equipment away from rain, moisture and liquids.

SAFETY INSTRUCTIONS

Every person involved with the installation, operation & maintenance of this equipment should:

  • bcompetent
  • Follow the instructions of this manual

CAUTION: Take care using this equipment! high voltage-risk of electric shock!!

Before your initial start-up, please make sure that there is no damage causedduring transportation.Should there be any, consult your dealer and do not usethe equipment. To maintain the equipment in good working condition and to ensure safeoperation, it is necessary for the user to follow the safety instructions andwarning notes written in this manual.
Please note that damages caused by user modifications to this equipment arenot subject to warranty.

Digital display operate

lllustration part

YeeSite-144LEDs-RGB LED-Stage-Light-Bar-fig-1

Operation instructions

After starting pressA(MENU) Enter into main-menu, Press B(UP) C(DOWr) to select the submenu, and then press D(ENTER) to ensure.

ATTENTION
DANGER OF LIFE! RISK OF BURNS! RISK OF FIRE! RISK OF SHORT CIRCUIT!

DMX Signal Connection

YeeSite-144LEDs-RGB LED-Stage-Light-Bar-fig-2

Technical Specifications

  • Voltage: AC110-240V, 50/60Hz
  • Consumption : 60W
  • LEDs: 144Pcs (12*12Pcs) SMD 5050 3IN1 RGB LEDs
  • Operation :Auto, DMX512,Sound ,Master/Slave
  • Channel: 3/5/8/36/40CHs, With LCD display,
  • Color: RGB color can be mixed to more than 16. 7 million kinds of color. Beam Angle: 90°
  • Dimmer: 0-100% linear dimming
  • OMX in/out,Power in & Power out.
  • Dimension: 1005.59cm

SETTING MENU LED DISPLAY.

Mode Programming Description

Auto mode

| ****

Auto

| Sp1-10| Auto Speed 1-10

(slow->fast)

| ****

Auto-run mode

St0-9| (slow->fast)



OMX mode

| ****


Addr

| 3CH| A001-A510| ****

Each channel mode is aseparate address, plugged into the console, automaticallyenter

OMX mode

5CH| A001-A508
8 CH| A001-A505
36CH| A001-A477
40CH| A001-A473


Show

| ****

Shou

| Sh 1-56| Program Show 1-56
Sp1-10| Program Speed 1-10 (slow->fast)
St0-9| Program Flash 0-9 (slow->fast)
Sound Mode| Soud| Sou1-2| Sen1-9| Sound active modes 1-2,sound sensitivity 1-9
Slave| SLAV| Slave| Slave (Slave, automatically identify the master)



Edit color

| ****


Colo

| r000-255| Red (0-100%) Red Dimming
g000-255| Green (0-100%) Green Dimming
b000-255| Blue (0-100%) Blue Dimming
St0-9| LED Strobe (slow->fast)
Static colors| StAt| CL01-CL37| static color (37 static colors to choose from)
St0-9| LED Strobe (slow->fast)









Product Set

| ****








Set

| ****


dis

| 10s| ****


Set display board backlight time,10 seconds to always on, factory default 10 seconds

20s
30s
60s
on


temP

| ****

50-65°C

| Protection temperature setting,50-65°C range protection,more than this range began to reduce the output power
dir| —>| Chasing direction: right
<—| Chasing direction: left
InFr| on| Remote control function setting on
oFF| Remote control function setting oFF


Send

| yes| one button to set the send function to send the current light channel mode and temperature protection value to other lights connected to this light.(No other controller on the line)
Send




Information

| ****



Info

| ver| VVxx| Software version


temp

| ****

xxc

| The current light board temperature( degrees Celsius), if the temperature detection line failure, power on prompt -RT-, menu display eror

DMX MODE1:3 CH

CH1 0-255 ALL RED (0-100%)
CH2 0-255 ALL GREEN(0-100%)
CH3 0-255 ALLBLUE(0-100%)

DMX MODE2:5 CH

CH1 0-255 MasterDimmer

CH2

| 0-9| No Function|

Strobe

10-255| Slow->Fast
CH3| 0-255| ALL RED (0-100%)
CH4| 0-255| ALL GREEN(0-100%)
CH5| 0-255| ALL BLUE (0-100%)

DMX MODE3:8CH

CH1 0-255 MasterDimmer
CH2 0-255 ALL RED (0-100%)
CH3 0-255 ALL GREEN(0-100%)
CH4 0-255 ALL BLUE(0-100%)
CH5 0-9 No Function
10-255 Slow->Fast

CH6

| 0-3| CH2-4 Control the overall flower color|

RGB Effect Channel

4-7| Pattern Effect 1(CH2-4 Control the

pattern color)

8-11| Pattern Effect 2(CH2-4 Control the

pattern color)

|
148-151| Pattern Effect 37(CH2-4 Control the pattern color)
152-155| Pattern Effect 38(Built-in effect colors)
156-159| Pattern Effect 39(Built-in effect colors)
|
224-227| Pattern Effect 56(Built-in effect colors)
228-231| Auto Effect (Cyclic running pattern effect 1-56)
232-235| Sound 1
236-255| Sound 2
CH?| 0-255| RGB Program Speed(Slow->fast)

CH8

|

0-255

| CH6 in the pattern 1 – pattern 25, this channel is used as a pattern background color selection function

(see final background color table for details)

DMX MODE4:36CH

CH1 0-255 R1(0-100%)
CH2 0-255 G1(0-100%)
CH3 0-255 B1 (0-100%)
CH34 0-255 R12(0-100%)
CH35 0-255 G12(0-100%)
CH36 0-255 B12(0-100%)

DMX MODE5:40CH

CH1 0-255 R1(0-100%)
CH2 0-255 G1(0-100%)
CH3 0-255 B1(0-100%)
CH34 0-255 R12(0-100%)
CH35 0-255 812(0-100%)
CH36 0-255 B12(0-100%)

CH37

| 0-9| No Function| ****

Strobe

10-255| Slow->Fast










CH38

| 0-3| CH1-37Control single segment| ****








RGB Effect Channel


4-7

| Pattern Effect 1(CH1-3 Control the pattern color)


8-11

| Pattern Effect 2(CH1-3 Control the pattern color)
|


148-151

| Pattern Effect 37(CH1-3 Control the pattern color)
152-155| Pattern Effect 38(Built-in effect colors)
156-159| Pattern Effect 39(Built-in effect colors)
|
224-227| Pattern Effect 56(Built-in effect colors)


228-231

| Auto Effect(Cyclic running pattern effect 1-56)
232-235| Sound 1
236-255| Sound 2
CH39| 0-255| RGB Program Speed(Slow->fast)


CH40

| ****

0-255

| Ch38 in pattern 1 – pattern 25, this channel is used as a pattern background color selection function (see final background color table for details)

RGB 3in 1 Background Color Table:

Value Color
0-6 R:000 G:000 B:000
7-13 R: 51 G:000B:000
14-20 R:102G:000B:000
21-27 R:153G:000B:000
28-34 R:204G:000B:000
35-43 R:255G:000B:000
42-48 R:000G: 51 B:000
49-55 R:000G:102 B:000
56-62 R:000 G:153 B:000
63-69 R:000 G:204 B:000
70-76 R:000G:255B:000
77-83 R:000G:000B: 51
84-90 R:000G:000 B:102
91-97 R:000G:000B:153
98-104 R:000G:000 B:204
105-111 R:000G:000 B:255
112-118 R: 51 G: 51 B:000
119-125 R:102G:102B:000
126-132 R:153 G:153 B:000
--- ---
133-139 R:204 G:204 B:000
140-146 R:255G:255B:000
147-153 R:51 G:000B: 51
154-160 R:102 G:000 B:102
161-167 R:153 G:000 B:153
168-174 R:204G:000B:204
175-181 R:255 G:000B:255
182-188 R:000G: 51 B: 51
189-195 R:000G:102 B:102
196-202 R:000 G:153 B:153
203-209 R:000 G:204 B:204
210-216 R:000 G:255 B:255
217-223 R:51 G:51 B:51
224-230 R:102 G:102 B:102
231-237 R:153 G:153 B:153
238-244 R:204 G:204 B:204
245-255 R:255G:255 B:255

MAINTENANCE

Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life andlor mechanical wear. Tomaintain optimum performance and minimize wear, clean your lighting. products at least twice a month.However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency. To clean the product, follow the instructions below:

  1. Unplug the product from power.
  2.  Wait until the product is at room temperature.
  3. Use a vacuum (or dry compressed air) and a soft brush to remove dustcollected on the external surface/vents.
  4. Clean all transparent surfaces with a mild soap solution, ammonia-free glasscleaner, or isopropyl alcohol.
  5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaningtissue.
  6. Softly drag any dirt or grime to the outside of the transparent surface.
  7. Gently polish the transparent surfaces until they are free of haze and lint.

i Always dry the transparent surfaces carefully after cleaning them.

CAUTION: Take care using this equipment! high voltage risk of electric shock!!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals