YeeSite HYT-20221117 70W LED RGBW Par Light User Manual
- June 16, 2024
- YeeSite
Table of Contents
YeeSite HYT-20221117 70W LED RGBW Par Light
JOW JlEDs RGBW Par Light
User Manual
BEFORE YOU BEGIN
What In the Box: 2 Pack
- 2 x YeeSite 70W ?LEDs RGBW Par Light
- 4 x Brackets
- 4 x Screws & Knobs
- 1 x Remote Controller
- 1 x User Manual
What In the Box: 4 Pack
- 4 x YeeSite 70W 7LEDs RGBW Par Light
- 8 x Brackets
- 8 x Screws & Knobs
- 2 x Remote Controller
- 1 x User Manual
Unpacking Instructions
Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition.
Claims
- If you encounter product quality problems during the use of the product, or receive goods missing parts, please contact us immediately, we have 24-hour after-sales support to serve you.
- You can contact seller customer service directly: [email protected]
Disclaimer
- YeeSite believes that the information contained in this manual is accurate in all respects. However, YeeSite assumes no responsibility and specifically disclaims any and all liability to any party for any loss, damage or disruption caused by any errors or omissions in this document, whether such errors or missions result from negligence, accident or any other cause.
- YeeSite reserves the right to revise the content of this document without any obligation to notify any person or company of such revision, however, YeeSite has no obligation to make, and does not commit to make, any such revisions.
Safety Notes
Please read the following Safety Notes carefully before working with the product. The Notes include important safety information about installation, usage and maintenance.
- Always connect the product to a grounded circuit to avoid the risk of electrocution.
- Always disconnect the product from the power source before cleaning or replacing the fuse
- Avoid direct eye exposure to the light source while the product is on.
- Make sure the power cord is not crimped or damaged.
- Never disconnect the product from power cord by pulling or tugging on the cord.
- If mounting the product overhead, always secure to a fastening device using a safety cable.
- Make sure there are no flammable materials close to the product when operating.
- Do not touch the product’s housing when operating because it may be very hot.
- Always make sure that the voltage of the outlet to which you’re connecting the product is within the range stated on the decal or rear panel of the product.
- The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the product to rain or moisture.
- Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
- Be sure that no ventilation slots on the product’s housing are blocked.
- Never carry the product from the power cord or any moving part.
- Always use the hanging/mounting bracket.
- The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at higher temperatures.
- In the event of a serious operating problem, stop using the product immediately.
- Never try to repair the product. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the seller customer service.
- To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
- Keep this user manual for future use. If you sell the product to someone else, be sure that they also receive this document.
INTRODUCTION
Product Overview & Size
SETUP
AC Power
The YeeSite 70W ?LEDs RGBW Par Light has an auto-ranging power supply and it
can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine
the product’s power requirements (circuit breaker, power outlet, and wiring),
use the current value listed on the label affixed to the product’s back panel,
or refer to the product’s specifications chart. The listed current rating
indicates the product’s average current draw under normal conditions.
Mounting
Before mounting the product, read and follow the safety recommendations
indicated in the Safety Notes.
Orientation
The YeeSite 70W ?LEDs RGBW Par Lights may be mounted in any position; however,
make sure adequate ventilation is provided around the product.
Mounting Diagram
OPERATION
Control Panel Operation
To access the control panel functions, use the four buttons located underneath
the display.
| Button | Function |
|---|---|
| < MENU> | Select an operation mode or back out of the current menu option |
| < UP> | Scroll up the list of option or select a higher value |
| < DOWN> | Scroll down the list of option or select a lower value |
| < ENTER> | Activate a menu option or a selected value |
Menu Map
| Mode | Display | Description |
|---|---|---|
| A001 | A001~A512 | DMX Address Setting |
| Au** | Au 1~Au15 | Static Color |
| FF** | FF 1~FF99 | Jump mode, speed from slow to fast |
| CC** | CC 1~CC99 | Fade mode, speed from slow to fast |
| EE** | EE 1 ~EE99 | Pulse mode, speed from slow to fast |
F***
| F000~F009| No Function
F010~F255| Strobe mode, speed from slow to fast
AuTo| AuTo| Auto Mode
Saud| Saud| Sound Mode
VOL 1~VOL9
| Sound sensitivity adjustment (weak to strong)
bAOF/bAON| “OF” light up without sound control/ “ON” blacklight without sound
control
D MX Connection:
- Set the product in DMX mode/A001 to control with a DMX controller.
- Connect the product to a suitable power outlet
- Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product.
Master I Slave Connection
- Set master product in any functions you like
- Set the slave product at “IP.01-IP.64” display, then connect a DMX cable from the DMX output of the master product to the DMX input socket on the slave product.
DMX Channel Modes, Assignments, and Values 7-Channel
| Channel | Function | Value | Description |
|---|---|---|---|
| CH1 | Brightness Adjustment | 0-255 | Master Dimmer |
| CH2 | Red | 0-255 | Red Dimmer |
| CH3 | Green | 0-255 | Green Dimmer |
| CH4 | Blue | 0-255 | Blue Dimmer |
| CH5 | White | 0-255 | White Dimmer |
| CH6 | Strobe Mode | 0-9 | No Function |
| 10-255 | Strobe Speed (fast to slow) (CH 1-5 is valid) | ||
| CH? | Manual Mode | 0-50 | CH 1-6 is valid |
| Jump Mode | 51-100 | Jump mode, CH6 adjust speed | |
| Fade Mode | 101-150 | Fade mode, CH6 adjust speed | |
| Pulse Mode | 151-200 | Pulse mode, CH6 adjust speed | |
| Auto Mode | 201-250 | Auto mode |
Remote Operation
| Icon | Button Function | Display on Panel | Function Description |
|---|---|---|---|
| 1 | ON/OFF | Press this button to turn on or off the light | |
| 2 | OMX Mode | A001 | Press this button to run OMX or Master/Slave mode |
| 3 | Auto Mode | Auto | Press this button to run auto mode |
| 4 | Jump Mode | FF1-99 | Press+/- to adjust speed |
| 5 | Fade or Pulse mode | CC1-99/ EE1-99 | Press again to |
pulse mode, press+/- to adjust speed
---|---|---|---
6| Strobe Mode| F0-255| Press+/- to adjust strobe rate
7
| Sound Activated Mode|
Saud
| Press+/- to adjust the sound sensitivity
8| Red| Au 1| Press this button for Red
9| Green| Au 2| Press this button for Green
10| Blue| Au 3| Press this button for Blue
11| Rose| Au 9| Press this button for Rose
12| Amber| Au 5| Press this button for Amber
13| Cyan| Au 6| Press this button for Cyan
14| White| Au4| Press this button for White
15
|
DOWN
| | Press this button to adjust the sound sensitivity and speed
16
|
UP
| | Press this button to adjust the sound sensitivity and speed
TECHNICAL SPECIFICATIONS
- OMX Channels: 7
- OMX Connectors: 3-pin
- Light Source: (LED): total 70W, 1 OW x ?LEDs
- Beam Angle: 40°
- Input Voltage: 100 to 240 VAC, 50/60 Hz (auto-ranging)
- Power and Current: 70 W, 0.42 A@100-240V, 50-60Hz
- Weight: 1.65Ib (0. 75kg) I unit
- Product Size : 6.9 x 6.9 x 3.9 in (17.517 .59.9 cm)