COOPER LIGHTING HALO ML4 Series Led Recessed Downlight Owner’s Manual
- June 9, 2024
- COOPER Lighting
Table of Contents
- ML4 canless & retrofit – 90+CRI
- Phase Control Dimming
- 0-10V Dimming
- LED Rated Phase Cut Dimmers (Used with ML4DM Canless CCT Field Selectable
- LED Rated Phase Cut Dimmers (Used with ML4DM Canless D2W Field Selectable
- LED Rated 0-10V Dimmers (Used with ML4DM Canless 1000 lumen setting)
- LED Rated 0-10V Dimmers (Used with ML4DM Canless 800 lumen setting)
- LED Rated 0-10V Dimmers (Used with ML4DM Canless 600 lumen setting)
- LED Rated Phase Cut Dimmers (Used with ML4D Retrofit CCT Field Selectable
- LED Rated Phase Cut Dimmers (Used with ML4D Retrofit D2W Field Selectable
- LED Rated 0-10V Dimmers (Used with ML4D Retrofit )
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
COOPER LIGHTING HALO ML4 Series Led Recessed Downlight Owner's Manual
The ML4 LED Series provides continuous dimming with select leading or trailing edge 120V phase cut dimmers and 0-10V dimmers.
ML4 canless & retrofit – 90+CRI
ML4D10FL9FS1E
ML4D10FL9FS1E010
ML4D08FL95FS1E
ML4D06FLD2W1E
ML4DM10LSFL9FS1E
ML4DM10LSFL9FSE010
ML4DM08LSFL95FS1E
ML4DM06FLD2W1E
Phase Control Dimming
0-10V Dimming
LED Rated Phase Cut Dimmers (Used with ML4DM Canless CCT Field Selectable
luminaires)
LED Rated Phase Cut Dimmers (Used with ML4DM Canless D2W Field Selectable
luminaires)
LED Rated 0-10V Dimmers (Used with ML4DM Canless 1000 lumen setting)
LED Rated 0-10V Dimmers (Used with ML4DM Canless 800 lumen setting)
LED Rated 0-10V Dimmers (Used with ML4DM Canless 600 lumen setting)
LED Rated Phase Cut Dimmers (Used with ML4D Retrofit CCT Field Selectable
luminaires)
LED Rated Phase Cut Dimmers (Used with ML4D Retrofit D2W Field Selectable
luminaires)
LED Rated 0-10V Dimmers (Used with ML4D Retrofit )
Dimmer Notes:
- Start time is measured at the lowest dimmer setting.
- Some LED dimmers have a “rapid start” design used to provide a momentary power boost to LED and CFL lamps during start-up. When a LED luminaire is on a dimmer with “rapid start” the boost may cause a momentary flash of the LED lighting. This “flash” is generated by the dimmer, and may be more noticeable when the dimmer is at a low setting. A solution is available with EATON dimmers which provide adjustment capability of the “rapid start”: Devine (DAL06P), Accell (AAL06P), and Trace (TAL06P).
Dimming Guide Disclaimer:
- Leviton® is a registered trademark of Leviton Manufacturing Co. Inc.; Lutron® is a registered trademark of Lutron Electronics Co. Inc.; Lightolier® is a registered trademark of Philips Lighting; Hubbell® is a registered trademark of Hubbell Incorporated; Legrand® and Pass & Seymour® are registered trademarks of Legrand®; Eaton® is a registered trademark of Eaton Corporation. These companies and their tradenames, trademarks or brands, where noted, are associated with their respective company and are not associated with Cooper Lighting Solutions.
- Testing conducted by Cooper Lighting Solutions is not a substitute for and does not imply certification by an independent laboratory or any other standards certification. Refer to the manufacturer specifications for more detailed information on product certifications and standards.
- This is a representative list of typical dimmers as tested by Cooper Lighting Solutions for performance with the designated LED luminaires only. Test data contained in this literature is based upon dimmers obtained in the marketplace. Information about these other manufacturers products is obtained from packaging and published information made available by the manufacturer and is deemed to be reliable, but has not been verified. Dimmer performance and perceived limitations of the dimmers are based on factors outside of Cooper Lighting Solutions’ control. The specifications of these dimming controls and their conditions of use may change without notice to Cooper Lighting Solutions or any other user. Cooper Lighting Solutions makes no specific recommendation on product selection and there are no warranties of performance or compatibility implied. Installer must ensure proper local and national electrical codes are followed; and that the dimmer application and condition of use is per dimmer manufacturer instructions and guidelines.
Cooper Lighting Solutions 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.cooperlighting.com
© 2022 Cooper Lighting Solutions All Rights Reserved.
Specifications and dimensions subject to change without notice.
TD51811522 page 11
September 30, 2022 9:11 AM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>