anko 205113 LED Ring Table Lamp Instruction Manual
- May 15, 2024
- Anko
Table of Contents
Instruction manual
LED RING TABLE LAMP
K: 43351466 T: 68735814
Model No.: 205113
205113 LED Ring Table Lamp
For Indoor Use Only. Place the Ring Light on a flat surface only,
Please read these instructions carefully and retain for future reference.
IMPORTANT SAFETY INSTRUCTIONS:
The following safety precautions should always be followed, to reduce the risk of electric shock, personal injury or fire. It is important to read all of these instructions carefully before using the product, and to save them for future reference or new users.
- This product must only be used as intended in accordance with the enclosed operating instructions.
- If the external flexible cable or cord of this luminaire is damaged, this product should be discarded.
- If the luminaire stops unexpectedly or appears to malfunction, switch off the power supply and stop using immediately. Seek professional advice to rectify the fault or make repairs.
- Switch off the power supply when not in use, before cleaning or changing accessories.
- Keep the luminaire and cable away from sources of heat, sharp objects or anything that may cause damage.
- Be aware that some surfaces may become hot. Do not touch hot surfaces and supervise others accordingly.
- This product has not been designed for use by children. Children should be closely supervised at all times when they are near any electrical appliance.
- To protect against electric shock, never allow the luminaire come into contact with water or any other liquid.
- Never reach this fuminaire that has fallen into water. Do not re-use until the product has been inspected and approved by a qualified electrician.
- Do not use outdoors. This luminaire has been designed for domestic indoor use only.
- Use onty a microfiber and dry cloth for cleaning the product.
- Operate carefully to not cause any damage by dropping of physical shocking it.
- Do nat leave the product in excessive heat, high temperatures can cause the product to malfunction.
- The hght source of this fuminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- Not suitable for mounting on tubular material.
Product
Operation Instructions
Connect the USB cable to a USB power supply (not included) with output voltage
DC SV 1A.
Functions
| Mode | Function | +/- Key function |
|---|---|---|
| 1 | Three color chasing (three colors exist at the same time) | Speed adjustment |
| 2 | Seven color chasing (seven colors exist at the same time) | Speed adjustment |
3
4| Three color cycle superposition (red -> green -> blue coverage)
Seven color cycle superposition| Speed adjustment
Speed adjustment
5| Colourful breathing gradient (for example: 100% red 9 fading 9 green
gradually brightening)| Speed adjustment
6| White| Brightness adjustment
7| Red| Brightness adjustment
8| Green| Brightness adjustment
9| Blue| Brightness adjustment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>