PROJECTA EVCBT2T1 EV Charging Cable Instruction Manual

May 15, 2024
Projecta

PROJECTA logo P/No. EVCBT2T1
EV CHARGING CABLE
TYPE 2 TO TYPE 1 7.2KWPROJECTA EVCBT2T1 EV Charging
Cable

EVCBT2T1 EV Charging Cable

WARNING

  • For charging EV Vehicles only.
  • If cord is damaged do not attempt to use. It must be replaced or repaired by a qualifiedperson.
  • This lead is not intended for use by persons (including children) with reduced physical,  sensory or mental capabilities, or lack of experience and knowledge, unless they have been  given supervision or instruction concerning use of the appliance by a person responsible for  their safety.
  • Children should be supervised to ensure that they do not play with the appliance.

CARE INSTRUCTIONS

  • Try and keep clean, avoid mud and harsh chemicals.
  • Clean cable and connector housing with mild detergent and water.
  • Apply lubricated contact cleaner to the power terminals regularly.

INSTRUCTIONS FOR USE

  1. Connect the inlet of the charging lead into the charger.
  2. Connect the outlet of the charging lead to the car.
  3. To stop charging. Follow the reverse procedure.

SPECIFICATIONS

PART NO. EVCBT2T1
PHASE 1
VOLTAGE 240V
CURRENT 32A
MAX POWER 7.2kWh
OVERALL LENGTH 5m
CABLE LENGTH 4.6m
WEIGHT 2.27kg
IP RATING IP65
--- ---
IMPACT PROTECTION IK10
WORKING TEMPERATURE -30°C ~ +50°C
WORKING HUMIDITY 5~95%
BATTERY CHARGE TIMES
30kWh BATTERY 4 hrs
60kWh BATTERY 8 hrs
90kWh BATTERY 12 hrs

WARRANTY STATEMENT
Brown & Watson International Pty Ltd (“BWI”) of 1500 Ferntree Gully Road, Knoxfield, Vic., telephone (03) 9730 6000, fax (03) 9730 6050, warrants that all products described in its current catalogue will under normal use and service be free of failures in material and workmanship for a period of one (1) year from the date of the original purchase by the customer as marked on the invoice. This warranty does not cover ordinary wear and tear, abuse, alteration of products or damage caused by the purchaser.
To make a warranty claim the consumer must deliver the product at their cost to the original place of purchase or to any other place which may be nominated by either BWI or the retailer from where the product was bought in order that the warranty assessment may be performed. The consumer must also deliver the original invoice evidencing the date and place of purchase together with an explanation in writing as to the nature of the claim.
In the event that the claim is determined to be for a minor failure of the product then BWI reserves the right to repair or replace it at its discretion. In the event that a major failure is determined the consumer will be entitled to a replacement or a refund as well as compensation for any other reasonably foreseeable loss or damage.
This warranty is in addition to any other rights or remedies that the consumer may have under State or Federal legislation.
IMPORTANT NOTE
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Distributed by
AUSTRALIA
Brown & Watson International Pty. Ltd.
Knoxfield Victoria 3180
Phone: (03) 9730 6000
Fax: (03) 9730 6050
National Toll Free: 1800 113 443
NEW ZEALAND OFFICE
Griffiths Equipment Ltd.
19 Bell Avenue,
Mount Wellington,
Auckland 1060, New Zealand
Phone: (09) 525 4575
IS534
Issue 1 3.3.23

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Projecta User Manuals

Related Manuals