PROJECTA EVC2KW EV Emergency Charger Instruction Manual

PROJECTA EVC2KW EV Emergency Charger

Product Information

The Type 2 2.4KW EV Emergency Charger, with model number P/No. EVC2KW, is a charger designed specifically for electric vehicles. It features a Type 2 outlet, an LCD screen, a rubber protection cover, a battery level indicator light, and a mode button. The charger comes with an AC plug and has a delay start timer function. It has a power rating of 2.4KW and is suitable for use with electric vehicles.

Specifications

• Power Plug: Type 2
• Cable Length: Not specified
• Charging Rate: 10.0A
• Rated Input Voltage: Not specified
• Rated Output Voltage: Not specified
• Insulation Resistance of Cable: Not specified
• Wiring Harness Size: Not specified
• Delay Start Timer: 02:00:00, 04:00:00, 06:00:00, 08:00:00

Product Usage Instructions

1. Connect the charger to the AC mains power.
2. If required, set the delay start timer by pressing the button for 3 seconds. Choose from the available options: 02:00:00, 04:00:00, 06:00:00, or 08:00:00.
3. Ensure the charger is not connected to the electric vehicle.
4. Connect the charger to the electric vehicle.
5. The charger will start charging in the selected mode with a charging rate of 10.0A.
6. When charging is completed, the battery level indicator light will indicate a full charge.
7. In case of any errors, refer to the error mode section in the manual for the corresponding error state and recovery method.

WARNING

• Only use for EV charging. Not designed for other applications.
• Do not use the portable charger if the device is damaged.
• Do not open any part of the device by yourself.
• Do not disconnect while the device is charging.
• Please follow the user manual to use this device.
• Regularly check the portable charger for visible damage, there may be an electric shock hazard when using the damaged product.
• Do not modify, retrofit, or change any part of the charger under any circumstances.
• Ensure a stable service life and operation of the charging cable by keeping the environment clean and with a constant temperature and humidity. The charging cable must not be used in the presence of flammable gases and liquids.
• Ensure the charger is used for 240VAC 50Hz. 10Amp.
• If the charger fails to operate correctly as per the instructions, do not use it, and seek advice from PROJECTA customer support.
• Ensure the 240V plug is not connected via an adapter. High current is required.
• Please ensure the product is plugged directly into the wall socket and not via an extension cord.

FEATURES

• Charging your EV when away has never been easier with this 2.4KW charger. It is designed to plug into a standard 10Amp socketed outlet.
• The rainproof IP65 design instills confidence in its safety and usability, even if exposed to rain droplets.
• The charger is protected with safety in mind to protect the customer.
• Quick and easy to use! Simply connect the charger to the EV’s inlet and the charger will automatically detect the connection status and handshaking protocol, then start charging.
• The rugged and durable ABS enclosure is designed to last the test of time.
• The charger is fitted with an intelligent microprocessor that can highlight problems with the charging process and will indicate this on the display.
• The charger is fitted with over-voltage protection, under-voltage protection, overcurrent protection, over-temperature protection, leakage current protection, short-circuit protection.
• The charger is fitted with an In Cord – Control and Protection Device (IC-CPD) which allows communication between the EV vehicle and the charger.

SPECIFICATIONS

• PART NO. EVC2KW
• POWER PLUG AS/NZS 3112
• CABLE LENGTH 5m (Total length)
• CHARGING RATE 10A (2.4KWH)
• RATED INPUT VOLTAGE 230V AC ±10%
• RATED OUTPUT VOLTAGE 230V AC ±10%
• INSULATION RESISTANCE OF CABLE >1000MΩ (DC500V)
• WIRING HARNESS SIZE 3 X 2.5mm2 + 1 X 0.5mm2
• DELAY START TIMER 2h, 4h, 6h, 8h

INSTRUCTIONS FOR USE

• START
  • Connect the power cord.
  • Press button for 3 seconds to set delay start timer (2/4/6/8 hrs) or skip this step without timer
  • Plug into car,
  • Charging…
• FINISH
  • Pull plug out.
  • Power off.
  • Cover the rubber cap.
  • Store in the store bag.

NOTE: Please see the images below on how to use the charger. The charger can delay start by pressing the button for 3 seconds. Ensure the charger is connected to mains power and not connected to the EV vehicle.

1. Connect to the AC Mains Power.
2. Set Delay Timer if required.
3. Connect to the car.
4. Charging mode.
5. Charging completed.
6. Error mode.

Error Mode

WARRANTY STATEMENT

Brown & Watson International Pty Ltd (“BWI”) of 1500 Ferntree Gully Road, Knoxfield, Vic., telephone (03) 9730 6000, fax (03) 9730 6050, warrants that all products described in its current catalogue will under normal use and service be free of failures in material and workmanship for a period of one (1) year from the date of the original purchase by the customer as marked on the invoice. This warranty does not cover ordinary wear and tear, abuse, alteration of products or damage caused by the purchaser. To make a warranty claim the consumer must deliver the product at their cost to the original place of purchase or to any other place which may be nominated by either BWI or the retailer from where the product was bought in order that the warranty assessment may be performed. The consumer must also deliver the original invoice evidencing the date and place of purchase together with an explanation in writing as to the nature of the claim. In the event that the claim is determined to be for a minor failure of the product then BWI reserves the right to repair or replace it at its discretion. In the event that a major failure is determined the consumer will be entitled to a replacement or a refund as well as compensation for any other reasonably foreseeable loss or damage. This warranty is in addition to any other rights or remedies that the consumer may have under State or Federal legislation.

IMPORTANT NOTE
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does notamount to a major failure.

Distributed by

AUSTRALIA
Brown & Watson International Pty. Ltd.
Knoxfield Victoria 3180
Phone: (03) 9730 6000
Fax: (03) 9730 6050
National Toll Free: 1800 113 443

NEW ZEALAND OFFICE
Griffiths Equipment Ltd.
19 Bell Avenue,
Mount Wellington,
Auckland 1060, New Zealand
Phone: (09) 525 4575

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>