CREATE Retro Electric Kettle User Guide
- June 4, 2024
- CREATE
Table of Contents
CREATE Retro Electric Kettle
Thank you for choosing our electric kettle. Before using the appliance, and to ensure the best use, carefully read these instructions. The safety precautions enclosed herein reduce the risk of death, injury and electrical shock when correctly adhered to. Keep the manual in a safe place for future reference, along with the completed warranty card, purchase receipt and package. If applicable, pass these in-structions on to the next owner of the appliance. Always follow basic safety precautions and accident-prevention measures when using an electrical appliance. We assume no liability for customer failing to comply with these requirements.
SECURITY INSTRUCTIONS
When using any electrical appliance, basic safety precautions should always be observed.
- If the appliance is defective, do not try to repair it yourself. Always have a qualified profes-sional carry out any repairs.
- This appliance may be used by children over the age of 8 years old and persons with reduced physical, sensory or mental capabilities or lack of experience and know-how, but only if su-pervised or if they have been instructed on how to use the appliance safely and are aware of its potential dangers.
- Children are not allowed to clean and maintain the appliance, except if they are over the age of 8 years old and supervised.
- Keep the appliance and the cable out of reach of children under the age of 8 years old.
- Keep an eye on children to ensure that they do not play with the appliance.
- Check that the mains voltage corresponds with that shown on the rating plate of an electrical appliance before you use it.
- Check that the socket to which you connect the electrical appliance is earthed.
- Always install electrical appliances on a stable and level surface where it cannot fall over.
- Certain parts of an electrical appliance may become warm or sometimes hot. Do not touch them as you may burn yourself.
- Make sure your hands are dry when you touch an electrical appliance, a cord or a plug.
- Electrical appliances must be able to lose their heat to avoid fire hazards. Therefore, make sure that the appliance has sufficient clearance around it and that it does not come into contact with flammable materials. Electrical appliances must never be covered.
- Make sure that electrical appliances, cords or plugs do not come into contact with water.
- Never immerse electrical appliances, cords or plugs in water or any other liquid.
- Do not touch electrical appliances if they have fallen in the water. Immediately pull the plug out of the socket. Stop using the appliance.
- Make sure that electrical appliances, cords and plugs do not come into contact with heat sources, such as a hot hob or open fire.
- Never let cords hang over the edge of the sink, a worktop or a table.
- Always remove plug from the socket when you are not using the electrical appliance.
- Remove the plug from the socket by pulling the plug itself and not the cord.
- Regularly check if the cord of the electrical appliance is not damaged. Do not use the electri-cal appliance if the cord shows signs of damage. If the cord is damaged, it should be replaced by the manufacturer, a technical service provider or a person with an equivalent qualification, to avoid any danger.
- The appliance may not be switched on with the aid of an external time switch, or by a sepa-rate system with remote control.
- Be careful when using the appliance outdoors.
- Never use the appliance in damp or wet locations.
- Thoroughly clean the appliance after use (see Cleaning and Maintenance).
- Use solely the base supplied with the kettle. Never use the base for other purposes.
- Remove the kettle from the base, and fill with water from the tap. Never fill the it above the ‘max’ level.
- Do not switch on the appliance before you have filled it with water. Fill only with cold water.
- The kettle’s lid must remain securely closed whilst the appliance is in use.
- Never open the lid when the water is still boiling.
- Use the appliance only to boil or heat water. Never use it for other liquids.
- Fill the kettle with at least 0.6 litre of water.
- Allow the appliance to cool to room temperature before storage.
PARTS LIST
- Handle
- Lid
- Spout
- Filter
- Kettle
- Base
- Water-level indicator
- On/Off flap switch and indicator light
OPERATING INSTRUCTIONS
BEFORE FIRST USE
When using the kettle for the first time boil three jugs of water, and dispose
of the boiled water. This will remove the last traces from the manufacturing
process.
HOW TO BOIL WATER
- Place the machine on a flat surface.
- Fill the kettle with the required quantity of water (at least 0.6 litres). See water-level indi-cator.
- Close the lid by releasing the flap on the handle.
- Place the kettle on the base. Insert the plug in the wall socket. Push down the On/Off switch. The pilot light will illuminate.
- The kettle switches off automatically when the water has boiled. Now disconnect the kettle from the main power supply. Always keep the lid closed when pouring the water out.
OVERHEATING SAFEGUARD
The kettle is fitted with an overheating safeguard. This will switch off the kettle if it is operated without (sufficient) water. Allow the kettle to cool down for at least 10 minutes before using it again.
CLEANING AND MAINTENANCE
-
Remove the plug from the wall socket, and allow the appliance to cool.
-
Clean the kettle with a damp cloth. Never immerse the appliance in water. Never put the appliance in a dishwasher. Make sure that the electrical connections do not become damp.
-
If the interior of the kettle has become severely discoloured, then the best way to clean it is with a damp cloth and a little washing soda. After cleaning, rinse it very thoroughly.
WARNING: Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to clean the appliance. -
Before cleaning, make sure that the appliance is not connected to the power supply and that it has cooled down.
DESCALING
Lime will be deposited on the inside depending on the hardness of the water. For this reason the appliance must be cleaned at regular intervals.
-
Remove the plug from the wall socket, and allow the appliance to cool.
-
The kettle is fitted with a descaling filter. This filter must be removed for cleaning. Press the filter inward through the spout . The filter will spring loose. You can take it out through the top opening by turning the kettle upside down.
-
Fill the kettle with a vinegar solution to the MAX level, and bring to the boiling point.
-
Leave the kettle with the vinegar solution to stand for a couple of hours.
-
Empty the kettle, fill with clean water to the MAX level, and bring to the boiling point. Empty the kettle. Repeat this process twice.
WARNING: Never use ammonia or other products to descale the appliance. These can be injurious to your health. Use solely a vinegar solution, or special descaling agents available from retailers. -
Place back the filter through the top opening and click it onto the spout.