TECHMADE TM-H69T Wireless Earphone User Manual
- June 4, 2024
- TECHMADE
Table of Contents
TECHMADE TM-H69T Wireless Earphone
Warnings
Read this manual carefully and keep for future reference. All essential test
series have been performed and the aforementioned product complies with all
legal requirements.
Limitations in Intended Use or Foreseeable Misuse
- Do not disassemble the device. If a repair is required, contact a Techmade sales center or authorized service center.
- Do not subject the device to shocks, bumps or vibrations, it could damage it.
- Keep away from heat sources (eg radiators or kitchens), direct sunlight, excessive humidity, wetness, gases, vapors or flammable solvents.
- Do not recharge the device near flammable materials which could catch fire due to the heat developed.
- Do not hold the device with wet hands. This could cause electric shock or seriously damage them.
- Do not use the device when it could cause distractions and pose a danger (while driving a car, cycling, walking or operating machine tools)
- Do not immerse or expose the device to liquids.
- Avoid sudden volume spikes with unknown sound systems.
- Keep the device out of the reach of children and pets due to the presence of small parts that could constitute a choking hazard.
- The battery is integrated into the product. To replace it, contact competent personnel only. Damage to the battery could cause a fire and / or explosion hazard. Dispose of it properly.
Identification of the characteristics of the personnel who will use the machine (physical, competence) and level of training required for the users.
No particular training for use. Read the instruction booklet.
Product warranty
12 months warranty for professional operator. 24 months for the final consumer. Opening or attempting to open the product voids the warranty.
Safety related
Handle the device gently. Protect the device from bumps and falls.
Environmental (temperature, humidity)
Working temperatures: from 0°C to 40°C Humidity: <70% Storage temperature:
-10°C to 45°C
Cleanliness level
Disconnect the product from the main power supply before cleaning. Use a soft, dry cloth. Do not use alcohol or other cleaning solutions. Do not wash the product with running water.
Drying
Do not attempt to dry the product using a microwave oven, traditional oven or hairdryer. Use a dry cloth.
WEEE instructions
The European directive 2012/19 / EU on waste electrical and electronic
equipment (WEEE) provides that these appliances must not be disposed of in the
normal municipal solid waste stream, but must be collected separately to )t
optimize the recovery and recycling flow of the materials that make them up
and prevent potential damage to health and – the environment due to the
presence of potentially dangerous substances. The crossed out bin symbol is
featured on all products as a reminder. The waste can be delivered to the
appropriate collection centers, or it can be delivered free of charge to the
distributor upon purchase of a new equivalent equipment or without the
obligation of a purchase for equipment smaller than 25cm. For further
information on the correct disposal of these devices, please contact the
relevant public service.
Caution
To avoid hearing damage, we recommend that you do not exceed 50% of the
maximum volume of your audio device, always make sure to turn the volume down
before using it and limit the use of headphones to one hour or less per day .
Using headphones at high volume (above 85dB) or for prolonged periods of time
(over an hour a day) can cause permanent hearing damage. They can be gradual
and with a lack of warning signs, therefore carrying out a hearing check and a
medical exam are the only way to diagnose any hearing damage if you notice the
following symptoms: buzzing or buzzing and difficulty in understanding the
dialogues.
- Do not use headphones when they could cause distractions and pose a danger (while driving a car, cycling,
- Do not immerse or expose the headphones to liquids.
- Avoid sudden volume spikes with unknown sound systems.
- Keep the headphones out of the reach of children due to the presence of small parts that could constitute a choking hazard.
- Contact your doctor or audiologist regularly in case of hearing problems, excessive earwax production or any discomfort after use.
INSTRUCTIONS
Power on
After removing the earphones from the charging box, they will automatically
turn on and emit a sound. The headset LED will flash red and blue. After the
first connection the earphones will connect automatically and you can listen
to music or communicate with one or both earphones. You can also turn on the
headphones by pressing the multifunction touch button for 5 seconds until you
hear the sound alert.
Shutdown
There are two shutdown modes:
- Put them in the charging box and they will turn off and go into charging mode automatically.
- Press the function button on one of the earphones for 5 seconds to turn it off. An audible warning will notify you of the operation that has taken place.
BT connection
After pairing the 2 earphones, enter the bluetooth search on the smartphone /
tablet and select the device named “TM-H69T-FOOT” in the list. A warning
message will warn you when the earphones are connected. After the first
connection, the earphones will automatically connect to the smartphone /
tablet (With earphones turned off, bluetooth disabled or device pairing
deleted, the earphones will not connect automatically)
Touch button functions on earpho· nes
Music Play / Stop: While playing music, press any earphone function key
once to stop / play music.
Play the previous song: while playing music, press the multifunction
touch button on the left earphone twice to play the previous song. Press the
multifunction touch button two more times if you want to play the song from
the beginning.
Play the next song: while playing music, press the multifunction touch
button on the right earphone twice to go to the next song.
Call answer: When a call comes in, press the multifunction touch key of
any headset once to answer.
End calf: During a call, press the multifunction touch key on any headset
once to end the call.
Reject call: When a call comes in, press twice to reject the call.
Low battery indication
When the battery is low, you will hear a warning sound that will indicate to recharge the earphones, then recharge by inserting them inside the charging box. If not, the earbuds will automatically turn off after a few seconds.
Reload
Charging box charging I Power bank: connect the supplied charging cable to the charging box with the power supply (not included). While charging, the LED will flash red. When charging is finished, the LED will turn off. headphones into the charging box. While charging, the charging box LED will always stay on. When charging is finished, the LED will turn off.
Specifications
Touch control buttons
- Speaker: 13mm – 3mW, 32Q
- Sensitivity: 108dB ± 3dB
- Frequency response: 20Hz-20KHz
- BT version: VS.1
- Transmission power: + 6dBm
- Operating distance: 10M
- Earphone Battery: 30mAH x 2
- Li-ion Power bank battery: 200mAH
- Li-ion Microphone: 42 ± 3db
MODEL/ Ref.: TM-H69T
Description: Wireless earphones
We, Techmade s.r.l. We declare under our sole responsibility that the product
to which this document refers complies with the following standards: EN
62368-1:2014+All:2017 ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 301 489-17
V3.2.4 (2020-09) We hereby declare that all essential radio and test series
have been performed and that the aforementioned product complies with all
essential requirements of the RED Directive 2014/53/EU.
Made In China
For detailed Information contact customer service at
lnfo@techmade.eu TECHMADE products are guaranteed
for 2 years for all malfunctlons and manufacturing defects. For any
Information please contact your dealer or visit the website
www.techmade.eu Produced by TECHMADE S11 – Via
Ubertil 25 – 80055 Portier (NA), ITALY Tel. +39 0823 609112 PBX Fax +39 0823
214667 e-mail: info@techmade.eu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>