TECHMADE ZL54CJ TM Glow Smart Watch User Manual
- June 1, 2024
- TECHMADE
Table of Contents
TECHMADE ZL54CJ TM Glow Smart Watch
Product Information
Specifications
- Smartwatch with hypoallergenic materials
- Compliant with Italian and international regulations
- Brand : TECHMADE
- Product Code/Reference: TM-GLOW
- Model : TM-GLOW
- Warranty: 24 months for consumers, 12 months for professionals
- RF Output Power: [Specify power here]
Product Usage Instructions
Handling and Care
- Handle the smartwatch with care to avoid damage.
- Clean the smartwatch regularly with a soft, dry cloth.
- Avoid exposing the smartwatch to extreme temperatures or moisture.
Charging
- Use the provided charger to charge the smartwatch.
- Ensure the smartwatch is powered off during charging.
- Do not overcharge the smartwatch to prevent battery damage.
Setting Up
- Follow the user manual instructions for initial setup.
- Pair the smartwatch with your smartphone via Bluetooth for full functionality.
- Install any required software updates for optimal performance.
Usage Tips
- Customize watch faces and settings to suit your preferences.
- Use the smartwatch features such as notifications, alarms, and fitness tracking.
- Refer to the user manual for troubleshooting tips in case of issues.
FAQ
- Q: What should I do if my smartwatch stops responding?
- A: Try restarting the smartwatch by holding down the power button for a few seconds. If the issue persists, contact customer support.
- Q: How do I clean my smartwatch?
- A: Use a soft, dry cloth to gently wipe the surface of the smartwatch. Avoid using harsh chemicals or liquids.
READ CAREFULLY AND KEEP
We thank you for your preference by choosing TECHMADE product. Please read the instructions in this manual carefully.
Your TECHMADE smartwatch is guaranteed by Techmade S.r.l. for a period of two years from the date of purchase under the terms and conditions of the warranty. As proof of purchase, a copy of the receipt and the stamp of the authorized dealer on the warranty certificate are required in the space provided. The guarantee covers material and manufacturing defects. Your smartwatch will be repaired free of charge by our Service Center. The warranty will be void if the smartwatch is tampered with or repaired by people who are not part of the Techmade
S. r.l. service network. in Italy.
During the warranty period, for material and manufac-turing defects, the only components covered by the warranty are the display, the touch and the internal electronic components of the smartwatch. A component covered by the warranty will be repaired free of charge or the smartwatch will be replaced if manufacturing or material defects are found under normal conditions of use. In case of replacement, Techmade S.r.l. cannot guarantee that you will receive a smartwatch of the same model. If the requested model is not available, it will be replaced with a smartwatch of equal value and similar style.
This warranty does not cover the following:
- Damage and / or improper operation resulting from incorrect use, lack of care, accidents, normal wear and tear or from liquid materials (eg water).
In the event that warranty interventions are required, please send the
smartwatch, a copy of the retailer’s receipt, the warranty certificate and a
description of the problem to the nearest authorized service center (for more
information write to the
[email protected]).
For repair work not covered by this warranty, the service center can carry out the requested services at a cost that will depend on the model of the smartwatch and the type of intervention required. These charges are subject to change. These expenses will be communicated and must be accepted before the execution of the services. Shipping costs and other costs other than repairs under warranty are the responsibility of the owner of the smartwatch.
The battery, in the case of the smartwatch, is inserted at the time of
manufacture. As a result, its duration may be shorter than the technical
specifications illustrated in our instruction booklet.
All smartwatches are made of aluminum alloy, magnetic stainless steel and
plastic produced in P.R.C.
Smartwatches are produced with hypoallergenic materials in full compliance
with current Italian and international regulations.
MAINTENANCE AND WARRANTY
All TECHMADE smartwatches are built with highly professional technical
criteria, using innovative materials, quality tested.
TECHMADE smartwatches are resistant to fresh water but are not suitable for
diving and water sports, as the effectiveness of the seals could be
compromised.
For all models it is recommended not to press the buttons / not to extract the
crown in direct contact with water.
WARRANTY SERVICE
To obtain the warranty service, the customer must present a copy of the retailer’s receipt, a description of the problem and the warranty certificate duly completed, stamped and dated by the retailer from whom the smartwatch was purchased. The postage insurance costs for sending the smartwatch to an authorized service center are exclusively borne by the owner of the smartwatch.
INTERNATIONAL WARRANTY
Your smartwatch is guaranteed for twenty-four months starting from the date of purchase according to the conditions specified in this document. This guarantee is valid internationally and covers any material and manufacturing defects.
THE WARRANTY IS VALID ONLY IF COMPLETED CORRECTLY AND COMPLETELY WITH: THE DATE OF PURCHASE, THE STAMP AND SIGNATURE OF THE OFFICIAL DEALER AND THE PROOF OF PURCHASE. The following are excluded from the guarantee: the battery, the strap, the bracelet, the breakage of the display and the touch panel and any damage caused by improper use, negligence, shocks, accidents and normal wear and tear.
TECHMADETrademark: TECHMADE
Product Code / Ref.: TM-GLOW F.C.:ZL54CJ
Description: Smartwatch Software.: TM-GLOW
All essential test series have been performed and the aforementioned product complies with all legal requirements. This device complies with the essential requirements and other relevant provisions of the RED 2014/53/EU Directive. All essential radio test series have been performed.
Limitations in Intended Use or Foreseeable Misuse
- Do not disassemble the device. If a repair is required, contact a nearest sales center or authorized service center (for more information write to [email protected]).
- It is recommended to keep away from electrical appliances.
- Do not subject the device to shocks, impacts or vibrations.
- Keep away from heat sources (eg radiators or cookers).
- Do not hold the device with wet hands while it is charging. This could cause electric shocks or seriously damage the appliance.
- In the event of immersion in salt water, rinse immediately with fresh water to avoid any damage. Therefore, we do not recommend immersing the device in salt water when possible to avoid damage to the metal components (case, buckle, etc.) due to the corrosive agents contained in it.
- If the device is dropped or bumped, the water guards may be damaged.
- Do not recharge the device near flammable materials, which could catch fire due to the heat developed.
- Take care of the battery charging socket/connection. The battery can be recharged hundreds of times before it needs to be replaced.
- TECHMADE is not responsible for performance problems caused by applications from suppliers other than TECHMADE.
- Do not modify the product in any way. TECHMADE is not responsible for performance or incompatibility issues caused by changing registry settings or operating system software. Attempting to customize the operating system may cause the product or applications to malfunction.
- This product is not a toy. Keep it out of the reach of children and pets. Product is composed of small parts. If ingested they could cause a choking hazard.
- Risk of explosion if the battery is replaced with an incorrect type.
- Do not throw the battery into a fire or hot oven, or mechanically crush or cut a battery. Explosion danger.
- Do not leave the battery in a surrounding environment of extremely high temperature or extremely low air pressure. Danger of an explosion or the release of flammable liquids or gases. Do not use in low air pressure conditions at high altitudes or in extremely high or low temperatures.
Identification of the characteristics of the personnel who will use the
machine (physical, competence) and level of training required for users
No particular training for use. Read the instruction booklet.
Product warranty
24 months warranty for the final consumer and 12 months for professional operators. Opening or attempt-ing to open the product will void the warranty and may constitute a safety hazard.
Safety-related
- RF output power : <=4.41dBm;
- Frequency band : 2402-2480MHz
Handle the device gently. Protect the device from bumps and falls.
Environmental (temperature, humidity)
Working temperatures: -0°C~40°C/32°F~104°F
Cleanliness level
Use a soft, dry cloth. Do not use alcohol or other cleaning solutions.
Battery charging
To charge the battery, use only the supplied cable. Do not try to clean the unit with chemical solvents, it could damage the finish. Wipe with a clean, dry or slightly moistened cloth.
Waterproof
The device is a water-resistant device, which means it is rainproof and
splashproof. If a device has an IP67 degree of resistance it means that:
IP6X – Dust Resistant. It is completely protected from the ingress of dust.
IPX7 – Water Protection: Protection from temporary immersion in water (between
15cm and 1m depth for up to 30 minutes).
Drying
Do not try to dry the product using a microwave oven, traditional oven, hairdryer or other sources of heat. Use a dry cloth or mild detergent.
WEEE instructions
The European directive 2012/19/EU on waste electrical and electronic equipment
(WEEE) provides that these appliances must not be disposed of in the normal
municipal solid
waste stream, but must be collected separately to optimize the flow of
recovery and recycling of the materials that make them up and prevent
potential damage to health and the environment due to the presence of
potentially dangerous substances. The crossed-out bin symbol is featured on
all products as a reminder. The waste can be delivered to the appropriate
collection centers or can be delivered free of charge to the distributor upon
purchase of a new equivalent equipment or without the obligation to purchase
equipment smaller than 25cm. For further information on the correct disposal
of these devices, please contact the relevant public service.
INSTRUCTION
Charging instructions
Charge the device before use.
To recharge the device, insert the USB port into a charger (5V 1A) or PC and place the smartwatch correctly on the charging base.
I notify:
- Use the charger only on a flat and stable surface.
- If there is an obstacle between the smartwatch and the charging cable, the smartwatch may not charge properly.
- After charging the smartwatch, disconnect the power (do not leave the device charging for whole nights). To avoid damaging the device, use only the supplied cable.
- Do not use if the charging device is damaged.
- Disconnect the charging device when cleaning the smartwatch, during a thunderstorm or during a prolonged period of non-use.
- Do not attempt to disassemble or modify the smartwatch and charging cable.
- Do not twist or pinch the charging cable.
- Do not attempt to remove or replace the battery. The substances contained in this product and the battery can cause harm to the environment or health. Please dispose of it properly.
Download the app
Scan the following QR code for download the app:
Bluetooth connection
Touch screen actions
- Power on/off: long press to power on/off the device; short press to turn on/off the screen.
- Sensor (on the back)
- Charging slot (on the back)
Actions:
Scroll left/right and up/down to scroll through the different ones menu items
Quick menu
Scroll down to view the different icons to click for quick access to the
chosen section.
To activate the call function, also connect the smartwatch to the bluetooth of
the smartphone by pressing the icon in the settings
Main Menu and Functions
These functions cannot replace medical instruments. This product is not a medical device. It should not be used for any diagnosis or other medical applications.
-
Call function: to use the call function, call log, numeric keypad and contacts.
-
Voice assistant: allows you to interact with your smartphone via voice commands. * Configure your smartphone with your favorite voice assistant
-
Activity: Measurement of distance, steps and calories. The stats will reset at the end of the day.
-
Sleep monitor: Display sleep monitor data.
-
Heart rate : Measurement of heartbeats.
-
Blood pressure : Blood pressure measurement.
-
Oxygen saturation: Measurement of oxygen saturation
-
Sport: Click on the screen to choose the desired sport (plus 80 types of sport). The smartwatch will show the last measurement.
-
N.B .: press the side button for Pause/Stop
-
Weather: It will show today’s and next day’s weather forecasts. They will automatically update after connecting to the app.
-
Remote camera: After the connection, it is possible take pictures by pressing thebutton on the smartwatch.
-
Remote Music player : After connecting, you can listen to your favorite music.
-
Notifications: It will show the latest notifications received from Twitter, Facebook, Whatsapp and messages.
-
N.B .: You can activate/deactivate this function via the app.
Other functions: Games, Stopwatch, Stress, SOS, Alarm and reminder, Timer, Sedentary reminder, Drinking reminder, Wrist sense, 3 preset Watchfaces
- 1 editable Watchface + Watchfaces downloadable via app.
Troubleshooting
I can’t connect the smartwatch
- Check that the GPS and Bluetooth of the smartphone are turned on.
- Make sure that the smartwatch and the smartphone are not too far apart. The connection must be made within 10 meters.
- Make sure your smartphone is not in airplane mode. In airplane mode, the smartwatch cannot be connected.
- Make sure that the smartwatch is not linked to another account or smartphone.
- Make sure your smartphone’s operating system is Android 4.4 or later or iOS 9.0 or later.
- Make sure that a previous connection is not already active; if necessary, disassociate it and re-pair it exclusively through the app.
- I can’t synchronize the clock data
- 1) Check that the GPS and Bluetooth of the smartphone are turned on.
- 2) Make sure that the smartwatch and the smartphone are not too far apart. The connection must be made within 10 meters.
- 3) Make sure your smartphone is not in airplane mode. In airplane mode, the smartwatch cannot be connected.
- 4) Make sure the smartwatch is connected to the smartphone via the app.
- I can’t get notifications
- 1) Make sure that the notification permissions on the app are active.
- 2) Make sure that the smartwatch and the smartphone are not too far apart. The connection must be made within 10 meters.
- The alarm/schedule reminder does not work
Make sure the settings have been “saved” after being changed in the app.
- The heart rate value is not accurate or cannot be detected
Make sure the heart rate sensor is clean and wear the device securely. Do not move during the survey, sit down and maintain a correct position in order to have a more accurate heart rate value.
DECLARATION OF CONFORMITY
MODEL: TM-GLOW
Description: Smartwatch
We, Techmade S.r.l. We declare under our sole responsibility that the product to which this document refers complies with the following standards:
- SAFETY: EN IEC 62368-1:2020+A11:2020 EN 301489-1 V2.2.3
- EMC :EN 301489-17 V3.2.4
- EN 55032: 2015+A1:2020
- EN 55035: 2017+A11:2020
- EN IEC61000-3-2:2019+A1:2021
- EN 61000-3-3:2013+A2:2021
- RADIO: EN 300328 V2.2.2
- HEALTH: EN 62479:2010
We hereby declare that all essential radio and test series have been performed and that the aforementioned product complies with all essential requirements of the RED 2014/53/EU Directive
made in China
NIAH at TECHMADE products are guaranteed for 2 years for all malfunctions and manufacturing defects.
For any information please contact your dealer or visit the website www.techmade.eu
Product imported by TECHMADE Srl
- – Via Libertà, 25 – 80055 Portici (NA).
- Tel. +39 0823 609112
- PBX Fax :39 0823 214667
- e-mail: [email protected]