SUPERATV RZR XP 1000 Outfitter Sport Roof Rack Instruction Manual
- May 15, 2024
- SUPERATV
Table of Contents
SUPERATV RZR XP 1000 Outfitter Sport Roof Rack
Specifications
-
* **Model:** IN-CRS-P-RZR1K- Installation Date: 3/24/2023
- Manufacturer: SuperATV
Product Usage Instructions
- Installation Steps:
- Follow the steps below to correctly install the product:
- Step 1: Back Panel
- – Install Rails to Passenger Panel with provided hardware; tighten.
- – Install Front Bracket – R and Mount to Passenger Panel with provided hardware; do not tighten.
- Step 2: Rear Bracket
- – Install Rear Brackets to the Back Panel with the provided hardware; tighten.
- Step 3: Driver Panel
- – Install Driver Panel to Rails with provided hardware; tighten.
- Step 4: Front Panel
- – Install Front Panel to Front Brackets; tighten.
- Step 5: Seal Installation
- – Install Seal to the Front Panel in the designated location.
- Additional Steps for Roof Installation:
- If you are installing the roof accessory, follow these additional steps:
- Step 6: Roof Installation
- – Secure the Roof and Cage with the provided hardware.
- – Align the roof to the machine and tighten all hardware.
- Contact Information for Installation Assistance:
- If you require further assistance with the installation process, you can contact SuperATV via:
- Email: sales@superatv.com.
- Phone: 1-855-743-3427
- Website: www.superatv.com.
FAQs
- Q: Do I need to discard the packaging after installation?
- A: No, do not discard the packaging until the product has been successfully installed.
- Q: What should I do if the hardware feels too tight during installation?
- A: Unless noted otherwise, hardware should be snug when installing components, not tight.
- Q: How do I install the OEM Roof with this product?
- A: M6 Clip Nuts and M6 x 35mm Sealing Bolts are included for OEM Roof installation. Follow the provided instructions for proper installation.
Product Information
Do not discard packaging until the product has been successfully installed.
Installation Using Instruction
- Install Driver Panel to Rails with hardware shown; tighten.
- Install the Back Panel with the hardware shown; tighten.
- Install Front Bracket – L and Mount to Driver Panel with hardware shown; do not tighten.
- Install the Front Panel to the Front Brackets; tighten.
- Remove the Roof hardware shown.
M6 Clip Nuts are included if the OEM Roof is installed.
- If applicable, install M8 Clip Nuts in the locations shown.
M6 x 35mm Sealing Bolts are included if the OEM Roof is installed.
- Secure to Roof and Cage with hardware shown.
- Align to machine and tighten all hardware.
CONTACT
- 2753 Michigan Road
- Madison, Indiana 47250
- 855-743-3427
- Roof Rack: for Polaris RZR® XP 1000
Need help with your installation?
- sales@superatv.com.
- 1-855-743-3427
- www.superatv.com.
- 8:00am – 8:00pm EST M-Th
- 8:00am – 7:00pm EST Friday
- 9:00am – 2:00pm EST Saturday
Liability Statement
- SuperATV’s® products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by SuperATV® and is not recommended. SuperATV’s® products could interfere with other aftermarket accessories. If the user has aftermarket products on the machine, contact SuperATV® to verify that they will work together.
- Although SuperATV® has thousands of satisfied customers, users should be aware that installing lift kits, long travel, suspension kits, tyres, etc. will change the ride of the machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases the risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect users from severe injury or death. SuperATV® urges operators and occupants to wear a helmet and appropriate riding gear at all times.
- By purchasing and installing SuperATV® products, the user agrees that should damages occur, SuperATV® will not be held responsible for loss of time, use, labour fees, replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from SuperATV®. The total liability of the seller to the user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim.
- SuperATV® will warranty only parts provided by SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by SuperATV®. SuperATV® parts and products are not warranted if the item was not installed properly, misused, or modified.
- Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may violate the law. The Buyer is solely and exclusively legally and personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you.
- The Buyer is responsible for fully understanding the capability and limitations of his/her vehicle according to manufacturer specifications, warnings and instructions and agrees to hold SuperATV® harmless from any damage resulting from failure to adhere to such specifications, warnings and/ or instructions. The Buyer is also responsible to obey all applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV® harmless from any violation thereof.
- Unless noted, hardware should be snug when installing components; not tight.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>