neo chair DBS-H High Back Mesh Chair Instruction Manual
- June 14, 2024
- neo chair
Table of Contents
neo chair DBS-H High Back Mesh Chair Instruction Manual
Please make sure all the parts are included.
Package Content
-
BACK X1
-
SEAT X1
-
ARMREST X2
-
CONTROL MECHANISM X
-
GAS LIFT CYLINDER X1
-
WHEEL X5
-
BASE X1 BASE LEG X1
Headrest models comes with below part
-
A X10 (SEAT + BACK ARMREST)
-
B X4 (LOCKING)
-
C X10 (WASHER)
-
D X1 (ALLEN KEY)
-
E X2 HEAD REST BOLT
-
HEAD REST X1
Read the instructions carefully.
Please follow the assembly steps.
Instructions
NOTICE
Please use the allen key included instead of an electric drill.
TIPS!
Use the box for an easier assembly.
STEP 1 Bottom
-
Insert the base leg vertically into the base.
-
Press the base leg until you hear “CLICK.”
Ouch! Be careful not to get your hands caught in the gap.
-
Fix the base leg with one hand and insert five wheels into the base
-
Make sure to turn the base over
-
Insert gas lift cylinder into the center of the base
STEP 2 Top -
For proper alignment:
Slightly under-tighten the bolts.
Line up the armrest and the back. Loosely tighten with two bolts. Repeat on the other side.
-
For proper alignment:
Slightly under-tighten the bolts.
Put the armrest on the bottom of the seat and tighten with three bolts on each side.
-
Once all of the armrests bolts are in place, fully tighten every bolt.
-
Match the front stickers and secure the Control Mechanism to the seat.
STEP 3 Top + Bottom -
Mount the seat onto the gas lift cylinder
This step is only for a model with headrest
User Manual
To deodorize your new chair
leave the chair in a well ventilated area for 1-2 days
For longer use
Re-tighten bolts every 6 months by using the enclosed allen-key.
*Using an electric drill can damage the chair.
Please re-tighten bolts manually.
Cautions
Use this product only for seating one person at a time
DO NOT use the chair unless all bolts, screws and knobs are tight
DO NOT use the chair if only components are missing or damaged
DO NOT stand on the chair use as a step stool or ladder
Regularly check all bolts, screws, and knobs are tight
Be careful, some of the part are heavy and has sharped edge
Failure to follow these warnings may cause serious injury
If there are any problems, do not hesitate to e-mail us. support@neochair.com
Enjoy your new favorite chair
Our goal is to create a perfect customer experience.
Let us know if you have any feedback.
Your comment motivates us to become a better team
support@neochair.com
www.neochair.com
@NEOCHAIR
neochair_office
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>