Shenzhen Shi Aiker Electronic Technology HY08 Wireless Charging Station User Manual

Shenzhen Shi Aiker Electronic Technology HY08 Wireless Charging Station

Please read the instructions carefully before using

Interpretations with graphs

Thanks for choosing us!
This is a 3-in-1 wireless charger that allows you to enjoy the fun of digital products easily. Please kindly read the user manual before using and keep it for future reference.

Instructions

Use scenario 1:

• vertical three-in-one
• charging scenario

Product parameters

• Input: 5V=2A; 9V=3A
• Output: Phone 5-15W
• Watch 2.5W
• Earphone 3W

Mobile phone power: 5W/7.5W/10W/15W, after placing the mobile phone with wireless charging function in the charging position of the mobile phone, the mobile phone starts to charge, the corresponding left indicator light is green and stays on, and the green light flashes for 3 seconds after the power is fully charged.

Earphone power: After the headphone box with wireless charging function is placed in the corresponding charging position, the headphone box starts to charge, and the corresponding right indicator light is green and remains constant.

Watch power: After placing the Apple Watch in the watch charging position, the watch starts to charge. Insert the stand on the reverse back to charge the Samsung watch.

FAQ

If you’re experiencing interrupted or slow charging, check the following:

1. The back of your phone should not have any metal, pop sockets, or credit cards.
2. Put the phone in the center of the charging surface (this lets the charging coil in your phone line up with the one inside the wireless charger).
3. The wireless charging coil on Sony phones is located slightly below the center.
4. Phone cases should be no thicker than 5mm for effective charging
5. Check whether the adapter is QC3.0/QC2.0 fast charger.

If you’re failing to charge your device, please try out the following:

1. Please restart your cell phone and test with other USB cables.
2. Please check whether the indicator turns on or not.
3. Please check whether the adapter is Qc3.0/QC2.0 or not, iPhone original adapter does not match the wireless charger.
4. Please check your Phone case thickness(<=5mm). Metal rings or magnetic pads will not be available.

If you’re using the wireless charger with the recommended QC3.0/QC2.0 adapter and have removed any potential charging obstructions, but are still experiencing issues, try:

1. Replacing the cable connecting the wireless charger.
2. Rebooting your phone.
3. Unplug the adapter and reinsert it.

How can the watch charging module be used alone after disassembly?

1. It can be used by connecting power bank through the Type-C port.
2. It can be used by connecting a computer through the Type-C port.
3. It can be used by connecting an adapter through the Type-C port.

Tips

1.  Do not disassemble or throw into fire or water to avoid causing a short circuit.
2. Do not use the wireless charger in an extremely hot, humid or corrosive environments.
3. Do not use near magnetic bank cards or IC cards to avoid malfunctioning.
4. Keep out of reach of children and pets.
5. The images in this manual are sketch drawings of the actual product. The actual product might be slightly different.

Correct Disposal Of This Product

(Waste Electrical Electronic Equipment)
This Marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should. contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their suppliers and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B a digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur ina particular installation.lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet the general RF exposure requirements. The device can be used in Dortable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>