kuyaon ASA10624 LED Light Up Kawaii Cat Headphone Instruction Manual
- May 15, 2024
- Kuyaon
Table of Contents
Kumaon ASA10624 LED Light Up Kawaii Cat Headphone
Before You Begin…
Customer Support
For any questions or problems with your product, please visit our website at
customersupport123.com.
Caution
To ensure safe and proper use, read all safety information before using the
device. Only use with manufacturer-approved batteries, chargers, accessories,
and supplies.
- THIS DEVICE IS NOT A TOY, do NOT allow children or pets to use or play with this device.
- Do not disassemble, modify, or repair the device.
- Do not expose the unit to extreme temperatures (heat or cold), open flames, or humid, or wet conditions.
- Do not submerge in water.
- Low power may cause poor Bluetooth connection or sound distortion.
- Do not overcharge the battery.
- If using a USB adapter, make sure the adapter is not damaged.
- Do not allow the USB port or the connectors of the supplied USB cable to be exposed to dust or water, or come into contact with any conductive materials such as liquids, metallic powders, etc.
- The headphones contain built-in batteries and should not be disposed of with regular household waste. Please consult the local authorities on the correct way to dispose of this device.
In the Box
- Wireless Headphones (x1)
- USB Charging Cable (x1)
- Instruction Manual (x1)
Location of Controls
Power On / Off
Prev. Track / Vol. Down
Play / Pause, Answer / End Call / Turn Off Ear Lights
Next Track / Vol. Up
Getting Started
Charging the Headphones
Insert the small connector of the supplied Type-C charging cable into the
Type-C charging port on the headphones. Insert the large connector into a USB
power source, such as the USB port on a computer, or into a 5V USB adapter
(not included) and plug into a wall socket. The LED indicator will turn RED
while charging and will turn blue when fully charged.
Powering ON/OFF
Long-press ( ) the U button to power headphones On/Off.
Playback
- Press the button to Play/Pause audio.
- Long-press (2s) the button to turn off the ear lights.
- Press the button to skip to the previous track
- Long-press (3s) the button to decrease volume.
- Press the button to skip to the next track
- Long-press (3s) the button to increase volume.
Bluetooth Pairing
- Power the headphones ON,
- After a moment, a voice will be heard on the headphones indicating Wireless Mode. The LED indicator will flash RED and BLUE.
- Set your mobile device to search for Bluetooth devices, When it appears, select ASA10624 from the list of found devices.
- Once successfully paired, a tone will be heard, and the LED indicator will turn Blue.
Phone Calls
When paired to a phone via Bluetooth, you can control phone functions using
the controls listed below.
- Press the button to answer an incoming phone call
- Long-press (3s) the button to refuse an incoming phone call
- Press the button to end a phone call
AUX Line In
To connect directly to an external device, insert a 3.5mm AUX cable (not
included) to the AUX Line In on the headphones. Connect the other end of the
AUX cable to your external device.
Compliance Information
FCC Information
This device complies with Part 15 of the FCC Rules.
Caution : Any changes or modifications not expressly approved could void
the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pur- under part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful energy
and, if not installed and used by the instructions, may cause harmful
interference to If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment oft and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dedier or an experienced radio y technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Information
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
WARNING L-ion Battery Inside
This product is fitted with a Lition battery. Do not damage, open, or
dismantle the battery and do not use it in damp and corrosive conditions. Use
only compatible characters. Never dispose of batteries in a fire, and never
expose them to high temperatures. Do not expose the product to temperatures
exceeding 60°C (140°F).
Rating Label
Definitions
Direct current symbol tho sense genes the product moi not de o karoo as wase,
ano shower Proper disposal and receding hips This symbol signifies and de
dares that this equipment has battery charging which complies with
Bluetooth” This summary demonstrates that this is a wireless device compared
to Bluetooth” technology. The Elustooth” word mark and logos are registered
trademarks owned by Bluetooth Sis Inc., used under a license.
Warranty Information
90-Day Limited Warranty
This product as supplied and distributed new by an authorized retailer is
warranted by Southern Telecom, Inc. to the original
To obtain warranty services
- Your custoner odonto al esoneroool.come celeb
- Select the brand, fill out the corresponding form (exchanges require dated proof of purchase from an authorized retailer) then
- Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service centre determines this product to be deleted.
- Products received damaged as a result of shipping will require you to file a claim with
Warranty service not provided
voided in the ment any unauthorised person coins, alters of repairs this
product. Mi products being returned to the authorized service centre for
repair must be suitably packaged. NO WARRANTIES, WHETHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF THE DISTRIBUTOR
FURTHER DISCLAIM ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERICO STATED
ABOVE. NO OTHER EXPRESS DISTRIBUTOR. REPAIR, REPLACEMENT, OR REFUND OF THE
ORIGINAL PURCHASE PRICE AT THE DISTRIBUTOR’S SOLE DISCRETION – ARE THE
EXCLUSIVE REMEDIES OF THE CONSUMER.
IN NO EVENT WILL THE DISTRIBUTOR OR ITS MANUFACTURERS BE LIABLE FOR ANY INCIDENTAL DIRECT INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED THE DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY THE DISTRIBUTOR, THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE.
Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on warranties, so limitations or exclusions may not apply to you. All product names. trademarks. and roasted trademarks are the property of their respective owners. All company, product, and service names used in this document are for identification purposes only. Use of these names, trademarks, and brands does not imply endorsement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>