SUPERATV WSP2-12-1.5 Wheel Spacers Instruction Manual

May 15, 2024
SUPERATV

SUPERATV WSP2-12-1.5 Wheel Spacers

Product Information

Specifications

  • Product Name : Wheel Spacers / Adapters
  • Quantity : 2 Wheel Spacers included
  • Manufacturer : Rev IN-WheelSpacer

Product Usage Instructions

Installation Steps

  1. Remove the wheel from the vehicle.
  2. Remove nuts from the wheel spacers.
  3. Secure the wheel spacer to studs using the provided lug nuts and torque to OEM specifications.
  4. Secure the wheel to the wheel spacer using OEM lug nuts and torque to OEM specifications.
  5. For adapters, ensure that any nut put on the adapter stud freely threads on by hand.

FAQ

Q: Are adapter nuts pre-installed on the studs?
A: No, adapter nuts are not installed on studs since they are of a different thread size.

Q: What should I do if I need help with installation?
A: Contact us at sales@superatv.com or call 1-855-743-3427 during our business hours for assistance.

Q: Can I use the original vehicle nuts on the adapter studs?
A: Original vehicle nuts are typically not the same thread size as the studs on the adapter. Verify that any nut put on the adapter stud freely threads on by hand.

INSTALLATION INSTRUCTIONS

Wheel Spacers / Adapters

SUPERATV-WSP2-12-1.5-Wheel-Spacers-FIG-3

Liability Statement

SuperATV’s® products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by SuperATV® and is not recommended. SuperATV’s® products could interfere with other aftermarket accessories. If user has aftermarket products on the machine, contact SuperATV® to verify that they will work together.

Although SuperATV® has thousands of satisfied customers, user should be aware that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. SuperATV® urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing SuperATV® products, user agrees that should damages occur, SuperATV® will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from SuperATV®. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim.

SuperATV® will warranty only parts provided by SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by SuperATV®. SuperATV® parts and products are not warrantied if item was not installed properly, misused, or modified. Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may be in violation of law. The Buyer is solely and exclusively legally and personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you. The Buyer is responsible to fully understand the capability and limitations of his/her vehicle according to manufacturer specifications, warnings, and instructions and agrees to hold SuperATV® harmless from any damage resulting from failure to adhere to such specifications, warnings and/ or instructions. The Buyer is also responsible to obey all applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV® harmless from any violation thereof.

Need help with your installation?

SUPERATV-WSP2-12-1.5-Wheel-Spacers-FIG-1

secure Wheel to Wheel Spacer with OEM Lug Nuts; torque to OEM specification For Adapters, original vehicle Nuts are typically not same thread as Studs on Adapter. Verify that any Nut put on Adapter Stud freely threads on by hand.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

SUPERATV User Manuals

Related Manuals