HALCYON LED441 W46 LED Batten Light Instruction Manual
- June 10, 2024
- HALCYON
Table of Contents
HALCYON LED441 W46 LED Batten Light
Product Name: LED Batten Light
Model #: LED441 W46, LED442 W46
Description: 40 Watt LED, Non-dimmable, IP20, 4000K / 6000K 60 Watt LED,
Non-dimmable, IP20, 4000K / 6000K
Lumens : LED441
350mA I 20W I 2600lm 500mA I 28W I 3500Im 550mA / 31W / 3800Im 700mA I 40W I
4850lm
LED442
1050mA / 44W / 5400lm 1200mA / 51W / 6000lm 1300mA I 55W I 6300lm 1400mA I 60W
I 6800lm
Rated Voltage: 220-240V~, 50/60Hz
Factory default setting 4000K
- Switch off power.
- Remove caps, unscrew diffuser and remove.
- Fasten chassis to surface.
- Adjust the wattage as required.
- Re-connect driver connection and wire terminal block as indicated.
- Fasten diffuser to chassis.
- Replace caps.
- Switch luminaire on to test luminaire functions correctly and is electrically safe.
Installation note: Do not install on the same circuits as Metal halide,
Fluorescent and other “Low power factor” devices.
When installed on the same circuit it can cause flickering and/or premature
failure of the “high power factor” electronic drivers. The harmonic distortion
from low power factor devices alters the Waveform of the AC supply which can
cause componentry in high power factor electronic drivers to resonate, run
over temperature and fail after prolonged exposure.