COSTWAY SP35341 Billiard Table Instruction Manual

June 17, 2024
COSTWAY

COSTWAY SP35341 Billiard Table

COSTWAY-SP35341-Billiard-Table-product

Before You Start

  • Please read all instructions carefully.
  • Retain instructions for future reference.
  • Separate and count all parts and hardware.
  • Read through each step carefully and follow the proper order.
  • We recommend that, where possible, all items are assembled near the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
  • Always place the product on a flat, steady, and stable surface.
  • Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.

PARTS

COSTWAY-SP35341-Billiard-Table-fig- \(1\)

PRE-INSTALLED PARTS

COSTWAY-SP35341-Billiard-Table-fig-
\(2\)

ASSEMBLY INSTRUCTIONS

  1. Find a clean, level place to begin the assembly of your Billiard Table. We recommend that two adults work together to assemble this Billiard Table.
  2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts list pages. Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work surface.COSTWAY-SP35341-Billiard-Table-fig- \(3\)
  3. Attach the Legs (#2 & #3) to the Mainframe (#1) by using three Bolts (#A3) and three Washers (#A2) per Leg.
  4. Attach the End Leg Panels (#4) to the Legs by using four Screws (#A4) per End Leg Panel.COSTWAY-SP35341-Billiard-Table-fig- \(4\)
  5. Lift the table assembly from the floor with two adults, turn it over, and set the table on its legs in the location where you will use it. Go back and make sure that all connections are tight.

YOU ARE NOW READY TO PLAY

Return/Damage Claim Instructions

  • DO NOT discard the box/ original packaging.
    In case a return is required, the item must be returned in the original box. Without this, your return will not be accepted.

  • Take a photo of the box markings.
    A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts.

  •  Take a photo of the damaged part {if applicable).
    A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.

  • Send us an email with the images requested.
    Email us directly from the marketplace where your item was purchased with the attached images and a description of your claim.

USA office : Fontana
AUS office : Truganina
GBR office : Ipswich
ITA office : Milano
POL office: Gdansk
DEU office: FDS GmbH, Neuer Holtigbaum 36, 22143 Hamburg, Deutschland
FRA office: Saint Vigor d’Ymonville

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals