kadams K0006STHW Bathroom Clock User Manual

kadams K0006STHW Bathroom Clock

Specifications

• Size: 105*148mm
• Model: K0006STHW/K0006STHB K0006STH
• Manufacturer: KADAMS Products
• Website: www.kadamsproducts.com

Overview
The bathroom clock features an LCD screen display with various functions including time display, calendar, temperature and humidity display, low battery indicator, and multiple mounting options.

Functions

• 12/24Hr Time Display: Switch between 12-hour AM/PM or 24-hour clock time
• Seconds Count Up Display
• Indoor Humidity Display: Range from 20% to 95%
• Month Date Headings Display: M/D or D/M switchable
• Month Date Display: mm/dd or dd/mm switchable
• Low Battery Indicator
• Humidity-Proof, Moisture Proof: Ideal for Bathroom, Shower, and Kitchen Areas
• 4 Mounting Options: Suction Cups, Hanging Hole, Hanging PVC Rope, Table Stand

Getting Started

1. Twist and lift the back cover
2. Remove the battery compartment cover
3. Insert 1 x AA battery matching the polarity (+ and -)
4. Once the battery is installed or reset, the LCD will display indoor temperature
5. Close the battery cover after inserting the battery

Default Clock Settings
The clock settings can be adjusted using the five buttons provided on the unit.

Button Instructions

• Press [12/24] to change time display between 12 hours and 24 hours
• Press and hold [SET] key for 3 seconds to enter setting mode
• Use [/CF] or [/MD] keys to change settings

Order of Settings
The order of settings is Language, Year, Month & DateHeadings, Month & Date or Date & Month, Hour, Minute.

FAQ

1. Q: How do I change the language setting on the clock?
   A: Press and hold the [SET] key for 3 seconds to enter setting mode. Under the DAY heading, press [/CF] key (or [/MD] key) to change the language settings.

2. Q: What does the low battery indicator signify?

3. A: The low battery indicator appears on the LCD screen when the battery power is lower than 1.2V.

4. Q: What are the mounting options available for the clock?
   A: The clock can be mounted using suction cups, hung on a wall, attached with a PVC rope, or placed on a table stand.

BATHROOM CLOCK USER MANUAL

MODEL:
K0006STHW /K0006STHB K0006STH

KADAMS Products
www.kadamsproducts.com

MAIN UNIT

LCD SCREEN DISPLAY

1. Hour 12/24hr switchable
2. Minute
3. Second
4. Calendar mm/dd OR dd/mm switchable
5. Day – 3 Characters – 7 Languages
6. Temperature C/F switchable
7. Humidity
8. Low Battery Indicator
9.  AM/PM

OVERVIEW

1. 12/24
2. SET
3. ▲/CF
4. ▼/MD
5. RESET
6. Battery Compartment
7. Stand Compartment
8. Rubber Seal
9. Temperature and Humidity Sensor

BACK OF UNIT

1. Suction Cup

2. Hole for Wall Hanging
   OR
   Hole for attaching PVC Rope as a loop

3. Table Stand

FUNCTIONS

1. IP24 Protection – Waterproof for Water Spray
   Protected from water falling as a spray from any direction shall have no harmful effect. Protected from touch by fingers and objects greater than 12.5 millimeters.
   Perfect to use in bathroom, shower and kitchen areas. This feature means that it has the ability to be easily and safely installed into most household areas. Essential to have near the shower, bath and bathroom vanity mirror and glass, or kitchen sink window to keep track of time and to SAVE WATER!

2. 12/24Hr Time Display
   12 hour AM/PM or 24 hour clock time SWITCHABLE

3. Seconds Count Up Display

4. Indoor Temperature Display
   Thermometer C/F Celsius & Fahrenheit SWITCHABLE
   Range 0°C to 50°C and 14°F to 122°F
   When the temperature is lower than 0°C or 14°F, it will display LL.L When the temperature is higher than 50°C or 122°F, it will display HH.H

5. Indoor Humidity Display
   Hygrometer Humidity range 20%—95%
   When the humidity is lower than 20%, it will display LL
   When the humidity is higher than 95%, it will display HH

6. Month Date Headings Display
   M/D or D/M SWITCHABLE

7. Month Date Display
   mm/dd or dd/mm SWITCHABLE

8. Day Display (7 languages)
   Days of week – 3 Characters in length.
   ENG ITA FRE DUT SPA DAN GER ENGLISH ITALIAN FRENCH DUTCH SPANISH DANISH GERMAN

9. Low Battery Indicator
   When battery power is lower than 1.2V, the low battery indicator will be display on the LCD screen.
   (1 x Full battery = 1.5V)

10. Humidity-Proof, Moisture Proof
    Ideal for Bathroom, Shower and Kitchen Areas.

11. 4 Mounting Options
    Suction Cups, Hanging Hole, Hanging PVC Rope, Table Stand

GETTING STARTED

1. Twist and lift the back cover.
2. Remove the battery compartment cover.
3.  Insert 1 x AA battery matching the polarity (+ and -).
4. Once the battery is installed or reset, LCD will get a full extent for 3 seconds, and automatically display the indoor temperature.
5. After inserting the battery, close the battery cover.

If you want to hang the clock or use the suction cups, just close the suction back cover according to the closed direction. If you want to put the clock on the table, take out the stand from the suction back cover, then close the suction back cover according to the closed direction, after that, assemble the stand to the stand position refer to the picture on the previous page.

DEFAULT CLOCK SETTINGS

12:00AM – 2019 – M/D – 01/01 – ENG – TUE – °F (Fahrenheit)

BUTTON INSTRUCTION

FIVE BUTTONS: [12/24], [SET], [▲/CF], [▼/MD], [RESET]

1. Press [12/24] to change time display between 12hours and 24hours.

2. Press and hold [SET] key for 3 seconds to enter into setting mode.

3. The figure to be set will be flashing.

4. Press [▲/CF] key or [▼/MD] key to change the settings.
   Press [▲/CF] key to get one step increase, hold for 2 seconds to get 8 steps increase. Press [▼/MD] key to get one step down, hold for 2 seconds to get 8 steps down.

5. Press [SET] key to confirm and go to next setting.
   The setting order is:
   Language Year Month Date Headings  M /D or M/D/  Month Date or Date Month Hour Minute.

6. Press [SET] key again to confirm and exit setting.

7. Press [RESET] key to clear history.
   If you do not press any key within 30 seconds, it will automatically exit the set mode and keep the set data.

8. At time mode, press [▲/CF] key to switch between Celsius and Fahrenheit.

9. At time mode, press [▼/MD] key to switch between MD or DM

ORDER OF SETTINGS

The setting order is:

Language Year Month & Date Headings M/D D/M Month & Date or Date & Month Hour Minute

DAY DISPLAY – 7 LANGUAGES SWITCHABLE

Language DEFAULT is ENG and DAY is TUE

1. Press and hold [SET] key for 3 seconds to enter into setting mode.
2. Under DAY heading ENG is default and will be flashing.
3. Press [▲/CF] key (or [▼/MD] key) to change the settings for the correct language. The preset sequence is:
   ENG ITA FRE DUT SPA DAN GER ENGLISH ITALIAN FRENCH DUTCH SPANISH DANISH GERMAN

SET YEAR

1. Press and hold [SET] key for 3 seconds to enter into setting mode.

2. The figure to be set will be flashing.

3. After selecting the correct DAY – Language press [SET] key to confirm THEN go to next setting YR (year).

4. Press [▲/CF] key or [▼/MD] key to change to the correct year settings.
   The YR is DEFAULT to 2019 **

5. Press [SET] key to confirm and go to next setting.

6. The setting order is:
   Language Year Month & Date Headings M/D  D/M  Month & Date or Date &  Month Hour Minute

7. Press [SET] key again to confirm and exit setting.

8. Press [RESET] key to clear history.
   If you do not press any key within 30 seconds, it will automatically exit the set mode and keep the set data.

SET MONTH & DATE HEADINGS switchable M/D or D/M

1. Press and hold [SET] key for 3 seconds to enter into setting mode.

2. The figure to be set will be flashing.

3. After selecting the correct DAY – Language AND the correct YEAR (yr) press [SET] key to confirm THEN go to the next setting Month & Date Headings switchable M/D or D/M.

4. Press [▲/CF] key (or [▼/MD] key) to change to the correct Month & Date Headings – M/D or D/M settings.
   The Month and Date Headings is DEFAULT to M/D **

5.  Press [SET] key to confirm and go to next setting.

6. The setting order is:
   Language Year Month & Date Headings M/D D/M Month & Date or Date & Month Hour Minute

SET MONTH & DATE switchable mm/dd or dd/mm

1. Press and hold [SET] key for 3 seconds to enter into setting mode.

2. The figure to be set will be flashing.

3. After selecting the correct DAY – Language AND the correct YEAR (yr) AND the correct Month & Date Headings M/D or D/M press [SET] key to confirm THEN go to the next setting Month & Date or Date & Month switchable mm/dd or dd/mm.

4. Press [▲/CF] key (or [▼/MD] key) to change to the correct Month & Date or Date & Month switchable mm/dd or dd/mm settings.
   The Month and Date is preset to 01/01 (mm/dd)

5. Press [SET] key to confirm and go to next setting.

6. The setting order is:

7. Language Year Month & Date Headings M/D D/M Month & Date or Date & Month Hour Minute

8. Press [SET] key again to confirm and exit setting.

9. Press [RESET] key to clear history.
   If you do not press any key within 30 seconds, it will automatically exit the set mode and keep the set data.

SET TIME – Hour and Minute

1. Press and hold [SET] key for 3 seconds to enter into setting mode.

2. The figure to be set will be flashing.

3. After selecting the correct DAY – Language AND the correct YEAR (yr) AND the correct Month & Date Headings M/D or D/M AND Month & Date or Date & Month switchable mm/dd or dd/mm press [SET] key to confirm THEN go to the next setting Hour.

4. Press [▲/CF] key (or [▼/MD] key) to change to the Hour settings.
   The Hour and Minute is DEFAULT to 12:00AM 12HR format

5. Press [SET] key to confirm and go to next setting Minute “the above sequence applies”.

6. The setting order is:
   Language Year Month & Date Headings M/D D/M Month & Date or Date & Month Hour Minute

7. Press [SET] key again to confirm and exit setting.

8. Press [RESET] key to clear history.
   If you do not press any key within 30 seconds, it will automatically exit the set mode and keep the set data. **

TEMPERATURE SWITCHABLE C/F

1. Press [▲/CF] key to alternate between C/F Celsius & Fahrenheit.
   Range 0°C to 50°C and 14°F to 122°F
   When the temperature is lower than 0°C (14°F), it will display LL.L, when the temperature is higher than 50°C (122°F), it will display HH.H.

POSITIONED METHOD

The bathroom clock can be positioned in 3 ways (Preferred Mounting Methods – Stand and Hole):-

• STAND for Vanity Bench, Table or Shelf – Pull out the table stand bracket from the rear of the clock, place on bench, table or desk as desired.

• HOLE for Wall Mounting.
  PVC Transparent Hanging Rope – to be looped through the Hole to hang from a shower head or curtain rod or any fixed structure.

• 4 x SUCTION CUPS – for USE ONLY on Glass, Window, Mirror, Granite, Stainless Steel and any NON-POROUS surface with glossy finish.

Please be aware that there are certain TILES that are NOT EFFECTIVE with SUCTION CUP method, this is due to the COMPOSITION of the TILES.
Please AVOID using SUCTION CUP method on TILES!
TEST SUCTION by placing slightly above a vanity bench to see if the tiles are appropriate for the suction cups to hold.
The suction cup is very effective but can be temperamental if not applied properly. The suction power relies on draining air out of the cup, so the surface MUST NOT be concave-convex OR have any holes, liquid or anything else!
AVOID moving the Clock when using the Suction Cup mounting method, and always make sure you regularly check the suction to make sure it is secure.

• Clean and dry the area before installing or reinstalling. Ensure the surface is flat, smooth and not concave and/or convex.
• Applying a small amount of moisture to the suction cup.
• Press the outer edges of the clock gently, push out the air.
• The ‘other non-smooth surface’ please use 3m adhesive tape for textured tile, rough wood, emulsion paint, etc. Stick the 3m adhesive tape to the wall first and then attach the suction cup to the tape.

ALWAYS ensure the SURFACE IS DRY and CLEAN, otherwise it will reduce the adsorption capacity of suction and then drop down!

PROTECTIVE FILM COVER over Clock Screen
To removed simply peel the Protective Film Cover away from the edges of the clock face to reveal a CRYSTAL CLEAR SPARKLY POLISHED screen look.

TEMPERATURE DISPLAY
The indoor temperature will display accurately within 3-8 minutes automatically after set up.
Press [▲/CF] key to switch between the temperature display formats °C and °F.

M/D and D/M Switchable
The Month & Date headings M/D or D/M and Month & Date display mm/dd or dd/mm can be switched by pressing the [▼/MD] key to alternative between the two settings.

PRECAUTIONS

1. DO NOT clean any part of the product with benzene, thinner or other solvent chemicals. When necessary, clean it with a soft cloth.
2. NEVER IMMERSE the product in water. This will damage the product.
3. DO NOT expose the product to extreme force, shock, or fluctuations in temperature or humidity.
4. DO NOT tamper with the internal components.

BATTERY SAFETY WARNINGS

• USE NEW Alkaline BATTERY as this clock has many functions.
• DO NOT use rechargeable battery with this product.
• REMOVE exhausted battery immediately.
• REMOVE the battery when not in use.
• DO NOT recharge and do not dispose of battery in fire as the battery may explode.
• AVOID exposing battery to extreme temperature or humidity or direct sunlight.
• Keep battery out of reach from children. They are a choking hazard.
• DO NOT dispose of this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.

BATTERY INDICATOR

• Low Battery Indicator will appear on LCD screen when battery power is lower than
• 1.2V.
• 1 x Full battery = 1.5V

IP24 RATING

WARRANTY

KADAMS provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship.
Warranty service can only be performed by our authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to us, or our authorized service center.
The warranty covers all defects in material and workmanship with the following specified exceptions that are NOT COVERED:1) damage caused by accident, unreasonable use or neglect (including the lack or reasonable and necessary maintenance); (2) damage occurring during shipment (claims must be presented to the carrier); (3) damage to, or deterioration of any accessory or decorative surface;
(4) damage resulting from failure to follow instructions contained in your owner’s manual.
This warranty covers only actual defects within the product itself, and does not cover the cost of installation or removal from a fixed installation, normal set-up or adjustments, claims based on misrepresentation by the seller or performance variations resulting from installation-related circumstances. To receive warranty service, the purchaser must contact with KADAMS via email for the problem determination and service procedure.

Thank you for choosing a KADAMS Product!

• KADAMS Products
• MODEL: K0006STHW/K0006STHB/
• K0006STH
• Assembled in China
• www.kadamsproducts.com
• Email: info@kadamsproducts.com

References

• Manage Your Time Better | KADAMS – kadamsproducts

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>