Universal RC-I11-MAX Garage Door Opener Remote User Manual

Universal RC-I11-MAX Garage Door Opener Remote

Product Information

Specifications

• Manufacturer Model: RC-I11-MAX
• Battery Type: Built-in CR2032
• Working Voltage: 3.3V
• Support Frequency: 310mhz/315mhz/390mhz
• Support Learn Button Colors: Yellow, Purple, Orange/Red, Green
• Code Type: Security+ and Security+ 2.0 technology
• Buttons: A, B, C, D

Product Usage Instructions

Prepare

1. Locate the Learn button on the garage door opener.
2. Identify the color of the Learn button (Green, Purple, Yellow, or Red/Orange).

Programming

• Confirm Color of Learn Button
  Start with the garage door CLOSED and identify the color of the Learn button.

• Programming Initiation
  Press and hold buttons B & C for 1 second until the LED lights on. Release both buttons simultaneously. Enter programming mode.

• Choose Code Type
  Select the remote button you want to use. Press it 1-4 times corresponding to the color of your opener’s Learn Button. Press any other button once to confirm.

• Garage Door Opener Learning
  Press and release the Learn Button once on the garage door opener. The Learn LED will light within 30 seconds.

• Programming Complete
  Press and hold the programmed remote control button until the garage door opener light flashes or two clicks are heard to activate the opener.

To clear the memory of your garage door opener, press and hold the Learn Button on the opener until the light turns on and off after 6 seconds.

Warranty
This remote carries a one-year manufacturer’s warranty against defects in workmanship or materials starting from the purchase date. Contact us for assistance if any issues occur.

FAQ

• Q: What if my garage door opener has DIP switches?
  A: This remote does not support openers with DIP switches type.

SPECIFICATIONS

PREPARE

PROGRAMMING

1. Confirm Color of Learn Button
   Start with your garage door CLOSED. Check what color is the learn button behind the garage door opener.

2. Programing Initiation
   Press and hold button B & C for 1 second, the LED will light on.Then release the B & C buttons at the same time. After enter programming mode, this mode will exit if no action within 1 minute.

3. Choose Code Type
   Select one of the remote button you want to use to control your garage. Press it 1-4 times (see Compatibility List) corresponds to color of your opener Learn Button. Then press any other button once to confirm (except the button that was just programmed). Learn Button| # of Presses| Opener Brand| Opener Type
   ---|---|---|---
   Yellow| 1 times| LiftMaster Chamberlain Craftsman| 310/315/390Mhz 2011-Current
   Purple| 2 times| 315Mhz 2005-Current
   Orange/Red| 3 times| 390Mhz 1997-2005
   Green| 4 times| 390Mhz 1993-1996

4. Garage Door Opener Learning
   Press and release the Learn Button once on the garage door opener. The Learn LED will light within 30 seconds…

5. Programing Complete
   Press and hold the remote control button programmed in step 2 until the garage door opener light flash or two clicks are heard.

To clear the memory of your garage door opener
Press and hold your garage door opener’s Learn Button. The light above the button will turn on and shut off after 6 seconds. Once the light is no longer on, your garage door opener will be cleared of previous remote control connections.

WARRANTY

ONE-YEAR LIMITED YEAR WARRANTY
This remote carries a one-year manufactures warranty against defects in workmanship or materials commencing from the purchase date of the remote. If any problems occur, please contact us for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>