TRAXON Allegro Dot XS RGBW Light User Guide
- June 17, 2024
- traxon
Table of Contents
TRAXON Allegro Dot XS RGBW Light
Product Information
Specifications
- Dimension: 53.00mm x 13.00mm
- Weight: Varies based on mesh grid specifications
- Material: Stainless Steel Mesh Grid
Product Usage Instructions
Mounting Guide for AL Dot XS Mesh Grid
- Ensure the mesh grid is fully stretched before measuring the pitch.
- Use the provided Mounting Bracket designed for the specified Ferrule dimension.
- Refer to the installation guide for detailed Mesh Grid installation planning.
- Tighten the screw with a torque of 0.22Nm when using the Dot Clip.
Wire Mounting Instructions for AL Dot XS
- Run horizontal and vertical cables through the designated slots.
- Ensure the wires fit securely into the slot between the back and front bracket.
- Make sure all 4 locks are snapped tightly during installation.
FAQ
-
What is the recommended torque for tightening screws with the Dot Clip?
The recommended torque for tightening screws with the Dot Clip is 0.22Nm. -
How should I ensure proper wire mounting with the AL Dot XS Wire Mounting Bracket Set?
To ensure proper wire mounting, make sure the wires fit securely into the slot between the back and front bracket and ensure all 4 locks are snapped tightly during installation.
AL Dot XS Clear Dimension
AL Dot XS Diffused Dimension
Mounting-STAINLESS STEEL MESH GRID
NOTE: The Mounting Bracket is designed to fit to this Ferrule dimension.
Standard Mesh Grid
NOTE: Pitch measured when the mesh grid is fully stretched.
Allegro Dot XS Mounting Guide
NOTE: Please refer to the installation guide for Mesh Grid installation
planning.
Mounting-WIRE MOUNTING
Mounting-DOT CLIP
- CONNECT TO THE POWER SUPPLY IN ACCORDANCE WITH NATIONAL REGULATIONS.
- IF THE EXTERNAL FLEXIBLE CABLE OF THIS LUMINAIRE IS DAMAGED, IT SHALL BE EXCLUSIVELY REPLACED BY THE MANUFACTURER OR A SIMILAR QUALIFIED PERSON IN ORDER TO AVOID ANY HAZARD.
- INSTALLATION/MAINTENANCE ONLY BY SKILLED PERSONNEL.
- DURING OVERHAUL/MAINTENANCE ONLY USE ORIGINAL PARTS.
- IF ANY LUMINAIRE IS SUBSEQUENTLY MODIFIED, THE PERSON RESPONSIBLE FOR THE MODIFICATION SHALL BE CONSIDERED THE MANUFACTURER.
- THE MANUFACTURER BEARS NO LIABILITY FOR DAMAGE CAUSED BY INAPPROPRIATE USE OR APPLICATION.
www.traxon-ecue.com
©2023 TRAXON TECHNOLOGIES. ALL RIGHTS RESERVED.
Documents / Resources
|
TRAXON Allegro Dot XS RGBW
Light
[pdf] User Guide
Allegro Dot XS RGBW Light, Allegro Dot XS, RGBW Light, Light
---|---