FUTECH 008.02 Dice 2 Line Laser Red Instructions

FUTECH 008.02 Dice 2 Line Laser Red

Parts List

Case

1. Laserexit
2. Battery compartment
3. Tripod thread 1/4”
4. Power button
5. On-/Off-switch / Transport lock
   

First use

Remove any protective films where applied. Open the battery compartment (5) and insert batteries, please taking care to observe the indicated polarity.
Turn the transportation lock (5) to the “ON” position. The laser is switched on, the pendulum levelling mechanism is released, and the instrument is able to align itself on its own. Make sure that the instrument is not on too much of a slope (within 3°). If the slope of the instrument should exceed 3°, the lasers will flash or will go out automatically

Alignment

Place the device on a stable, horizontal base. It is recommended to install the device on working height. This improves the comfort while working and will result in a higher quality. Usage of a cross line laser with a spindle or telescopic tripod is optimal. The choice of the appropriate tripod immediately impacts the user friendliness of the device. Your device can be used on a tripod with 1/4” screw. In case you use a tripod with a different size of screw, provide the appropriate adapter.

Select laser lines

DICE2
All laser lines are always visible when the laser is on.

DICE3
When you activate the device, one horizon and one vertical line is activated. Use the (O) to switch on/off laser lines.

A Push 0x (startup) Horizontal line and vertical line
B Push 1x Vertical line
C Push 2x Horizontal line and 2 vertical lines

Transport

It is very important that, during transport, the On/off switch is in the OFF position (pendulum locked). This in order to avoid damage of the device.

TECHNICAL SPECIFICATIONS

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>