YITAHOME F320 Multifunctional Portable Mug Press User Manual

YITAHOME F320 Multifunctional Portable Mug Press

FEATURES

• Max. diameter : 85mm Max. length: 260mm
• Up to 300Z aluminum pot cups can be made

Warnings must be followed carefully to avoid body injury.

Introduction

1. Handle
2. Power socket
3. Mug heater
4. Clip
5. Aviation connector
6. LED Display
7. Setting knob

WHAT IN BOX

INSTRUCTION

1. Startup
   After powering on, short press the start button to start the machine.
   After startup, the machine will automatically heat up.

2. Shutdown
   Press and hold the start button for 3s to shut down.

3. Auto shutdown
   The machine will automatically shut down if there is no operation within 60min.

Temperature unit conversion

1. In shutdown state
2. Press and hold the start button for 6s.
3. Turn the switch to select the required temperature unit.
4. Short press the start button to start the machine.

Parameter setting

Temperature setting:

1. Turn the display half a turn to the right.
2. Enter the temperature setting mode after a beep sound.
3. Turn the switch to the right again to increase the temperature (+).
4. Turn the switch to the left again to reduce the temperature (-).

Time setting:

1. Turn the display half a turn to the left.
2. Enter the time setting mode after a beep sound.
3. Turn the switch to the right again to increase the time (+).
4. Turn the switch to the left again to reduce the time (-).

Ready to start

Parameter setting

1. Turn the display for a half turn.
2. Enter the setting mode after a beep sound.
3. Set corresponding parameters according to material type.

Start hot stamping

1. Plug in the power cord and turn on the power
2. Short press the start button to start the machine
3. Set printing temperature and time

Hot stamping process

1. Make sure that the machine reaches the set temperature before transfer printing.
2. Stick the picture on the mug
3. Open the machine
4. Put the mugs in from the left and right
5. Press down the handle
6. Press the countdown button to start the countdown

Tips:

1. Increase the transfer time if the color of the transferred pattern is too light.
2. Reduce the transfer time if the color of the transferred pattern is too dark.

Pressure adjustment

1. The pressure can be adjusted manually for different sizes of mugs
2. Turn the handwheel clockwise to increase the pressure
3. Turn the handwheel counterclockwise to reduce the pressure

Tips:
Please try to keep the pressure balance on both sides.

Electrical Diagram

1. Main Control Board
2. Connect the cable
3. Power Strip
4. Down temperature sensor
5. Buzzer
6. Thermal cutoff
7. Heating Filament

Mainboard wiring diagram

1. Output zero line
2. Input zero line
3. Input live line
4. Output live line
5. Display
6. Temperature probe
7. Sensor switch (backup)

Guarantee

The products are strictly based on the Consumer Protection Law of the People’s Republic of China and the Product Quality Law of the People’s Republic of China.

The services are as follows:
Within 12 months this product has the performance failure listed in the product Performance Failure Table”. It is confirmed by the manufacturer and can be used for maintenance service free of charge. If out of validity, damage caused by Force Majeure, or human causes, the machine is not covered by the warranty, or repair in charge.

Safety instruction
Before operating this unit, please read these instructions completely and save them.

Notice:

1. Keep unplugging when moving the machine.
2. Keep unplugged when installing accessories.
3. Place on a flat and stable platform and operate under ventilated conditions.
4. Wear special protective equipment when operating the machine

Warning
Improper use may result in electric shock, fire, personal injury, and other damage.

1. Do not use this machine in a hazardous location.
2. Do not use it when the machine is not working properly.
3. Do not allow children or adults who do not understand this manual to operate this machine.
4. Do not disassemble and repair this machine.
5. Do not use an unsuitable AC outlet.
6. Do not touch the heating plate when the machine heating

Basic Product Parameters

Warranty

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>