YISSVIC MK5700B-GS Electric Cappuccino Milk Frother Instruction Manual
- June 17, 2024
- YISSVIC
Table of Contents
YISSVIC MK5700B-GS Electric Cappuccino Milk Frother
READ INSTRUCTION CAREFULLY
- Read and follow all instructions.
- Keep instructions in a safe place for future reference.
- Please do not assemble, adjust or operate the milk frother without reading the manual.
WARNING
- Read all instructions before using.
- Before connecting the milk frother to the power supply, make sure that the voltage marked on the milk frother matches the local power supply voltage.
- The power base can not be used for other than intended use.
- Do not operate the milk frother without anything in it to avoid damaging the heat elements.
- Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the milk frother.
- Do not let the cord hang over the edge of a table or counter or touch a hot surface.
- Do not place on or near a hot gas or electric burner or in a heated oven.
- Ensure that the milk frother is used on a stable and flat surface out of reach of children, which will prevent the milk frother from overturning and prevent damage or injury.
- Keep hands and objects out of the jug while frothing to reduce the risk of severe injury to persons or damage to the milk frother.
- To protect against a fire, electric shock or personal injury, do not immerse the cord, plug, main unit or base in water or other liquids.
- Close supervision is necessary when any milk frother is used by or near children.
- Do not touch the hot surface.
- The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury.
- Do not operate it with a damaged cord or plug or after the milk frother malfunctions, or is dropped or damaged in any manner. Return the milk frother to the nearest authorized service.
PRODUCT DESCRIPTION
BEFORE THE FIRST USE
The milk frother can be used for finishing the following tasks separately:
- Hot frothing (Frothing and heating milk)
- Cold frothing (Only frothing separately, without heating)
- Heating (Only heating separately, without frothing)
Note
- Before using your milk frother, clean all the parts according to the section
- “CLEANING AND MAINTENANCE”.
- Do not use skim milk for frothing or it won’t produce milk foam.
- Please use whole milk or semi-skimmed at refrigerator temperature to froth. (Whole milk is recommended, temperature: 6-8°C. )
CLEANING AND MAINTENANCE
Always disconnect the milk frother from the power supply before cleaning.
CAUTION
- Do not rinse the milk frother surface.
- Do not rinse the milk frother base.
- Do not immerse the jug in water.
All parts of this milk frother are incompatible with the dishwasher.
- Take out the whisk and rinse the whisk in warm water.
- Clean the inner jug immediately after every use, or the milk foam will solidify on the jug. Rinse the inner jug with mild detergent and water. Then wipe it with a soft damp cloth.
- Clean the lid with water and mild detergent. Rinse thoroughly and dry.
- Wipe the surface with a soft damp cloth.
CAPACITY
- The amount of milk to be heated or frothed shall be complied with the requirement shown in Figure. 1.
OPERATION OF MILK FROTHER
- Place the milk frother on a flat table. Choose the appropriate whisk and insert it firmly onto the shaft inside the jug.
- Pour the milk into the jug according to the max& min mark inside the jug. The Max capacity chart is below for your reference.
- Place the lid firmly onto the jug. Then press the button to turn on.
Whisk
|
Function
|
Min capacity
|
Max. capacity
|
Time(approx)
|
Temperature
---|---|---|---|---|---
|
Cold frothing
|
75ml
|
150ml
|
60~180s
| The current temperature of the milk
Hot frothing
|
75ml
|
150ml
|
60-180S
|
60±5
|
Heating
|
75ml
|
300ml
|
60-240S
|
60±5
- Hot frothing: use the whisk with spring, and press the hot button to start. The red indicator light will light up to show that the unit is in operation.
- Heating milk: use the whisk without a spring press the hot button to start. The red indicator light will light up to show that the unit is in operation.
- Cold frothing: use the whisk with spring, and press the cold button to start.The blue indicator light will light up to show that the unit is in operation.
CAUTIONS
-
At least 3 minutes rest time must be maintained between two continuous cycles.
Otherwise, the frother will enter self-protection condition automatically after working for 5 cycles continuously. The working indicator will flash and the switch button will not be activated. After about 5 minutes of cooling down, the frother will enter a standby state and you can continue to operate it. -
Please clean the frother according to the section “CLEANING AND MAINTENANCE” after using.
SPECIFICATION
- Rated Voltage: 220V-240V
- Rated Power: 450W-550W
- Frothing Capacity: 150ml(max)
- Product Size: 100×190mm (ф×H)
- Rated Frequency: 50/60HZ
- N.W./G.W.: 800g/1000g
- Protection Class: |
- Product Capacity: 300ml
TROUBLES SHOOTING
| Problems | Causes | Solutions |
|---|
The indicator light doesn’t work or the frother doesn’t work
|
The plug is not inserted properly
|
Re-insert into the power
The milk frother and the base are not in good contact
|
Remove the milk frother and place again on the base
No power in the socket| Check the electric circuit
Problems with electric elements| Repair
Stop working after the device starts
| The temperature of the machine body is too high| Rinse cold water inside the
jug to reduce the temperature
Milk froth was damaged with immersion in water| Repair
The motor doesn’t work
| A milk frother is not cleaned in time after use and milk| Clean and move the shaft sleeve of the motor by hand to loosen it
Motor is damaged
|
Repair
No heating
|
Machine is damaged
|
Repair
Charring
| Dosage of milk is either too little or too much| Use the dosage of milk
according to the dial
The milk frother is reused without cleaning| Cleaning in time after every use
The actual use voltage is significantly higher than the rated voltage| Use the
appropriate voltage
Milk foam is not up to standard
|
Wrong milk type or temperature
|
Make sure to use whole or semi-skimmed milk at refrigerator temperature (about 6-8 °C)
The whisk is not inserted
|
Make sure to insert the whisk
The body is reused without cleaning
|
Make sure the body is clean
PACKING LIST
- YISSVIC milk frother x 1
- Whisk with spring x 2
- Whisk without spring x 2
- Spatula x 1
SPU: SP005806
- Model: MK5700B-GS
- Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>