YISSVIC 004485 Toilet Paper Holder User Manual
- June 14, 2024
- YISSVIC
Table of Contents
YISSVIC 004485 Toilet Paper Holder
Please read the instructions carefully before installation
PARTS DESCRIPTION
Precautions for the use of the glue
-
It can be used on smooth walls, such as glass, tile, marble, metal, wood, etc.. It can not be used on paints, plaster, cement, wallpaper and other non smooth and non sturdy walls.
-
The maximum load of the adhesive is <5kg (without screws), and it should not be used in excess.
The reason of falls in more than 90% of case is that the wall and the method of installation are not correct. Please install it strictly according to the instructions. -
Before installation, the walls should be clean, dry and free of dust. Moisture, water droplets, dust and potholes will affect the use of product.
Transparent glue installation method
-
Please, clean the wall before installation, keep dry, with no dust or greasy.
-
Gently tear the protective film off to use the transparent adhesive (after the adhesive is without film protection, please do not stick it to other objects).
-
Quickly stick to the designated position on the wall. (please ensure that the adhesive is completely adherent to the wall, please not tearing and re sticking. If the adhesive is tearing, this will affect the stickiness of the transparent glue)
-
Press tightly with hands or with a cloth to make the adhesive fully adherent to the wall.
-
After 24 hours, you can hang up the product.
Drilling installation method
Installation tools: drill, drill hole with a 6MM diameter, hammer, pencil
-
Place the toilette paper holder in the intended installation position, and mark the location of the holes with a pencil.
-
Drill the holes with 6MM electric drills.
-
Hammer the wall plugs into the holes with a hammer.
-
Aligning the product with the holes on the wall, insert the screws into the cover, and aligning it to the hole.
-
Screw the screws into the hole with a screwdriver and put the paper holder on the wall.
-
When the screw is tightened, the screw cap is covered and the installation is completed.