YISSVIC MK1000-UL Electric Milk Frother Cappuccino 4 in 1 Frother Instruction Manual

MK1000-UL Electric Milk Frother Cappuccino 4 in 1 Frother
Instruction Manual

MK1000-UL Electric Milk Frother Cappuccino 4 in 1 Frother

READ INSTRUCTION CAREFULLY : Read and follow all instructions. Keep instruction in a safe place for future reference. Please do not assemble, adjust or operate the milk frother without reading the manual.
PLEASE READ AND KEEP THESE IMPORTANT SAFETY INSTRUCTIONS
WARNING

1. Read all instructions before using.
2.  Before connecting the milk frother to the power supply, make sure that the voltage marked on the milk frother matches the local power supply voltage.
3.  The power base can not be used for other than intended use.
4. Do not operate the milk frother without anything in it to avoid damaging the heat elements.
5.  Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the milk frother.
6. Do not let the cord hang over the edge of a table or counter or touch a hot surface.
7.  Do not place on or near a hot gas or electric burner or in a heated oven.
8. Ensure that the milk frother is used on a stable and flat surface out of reach of children, that will prevent the milk frother from overturning and prevent damage or injury.
9. Keep hands and object out of jug while frothing to reduce the risk of severe injury to persons or damage to the milk frother.
10. To protect against a fire, electric shock or personal injury, do not immerse cord, plug, main unit or base in water or other liquids.
11. Close supervision is necessary when any milk frother is used by or near children.
12.  Do not touch the hot surface.
13. The use of attachments not recommended or sold by manufacturer may cause fire, electric shock or injury.
14. Do not operate it with a damaged cord or plug or after the milk frothier malfunctions, or is dropped or damaged in any manner. Return milk frothier to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment.
15. The milk frothier only used for frothing and heating milk. Do not use the milk frothier for other than intended use.
16.  Keep the milk frothier and its cord out of reach of children.
17. People with reduced physical, sensory or mental capabilities or lack of experience and knowledge should use it under the supervision and guidance of a guardian.
18. Always operate the milk frothier with lid in place.
19.  This milk frothier is for household and indoor use only. Do not use it outdoors!

PRODUCT DESCRIPTION

BEFORE THE FIRST USE

The milk frother can be used for finishing the following tasks separately:
I. Frothing and heating milk, froth thick foam.
II. Frothing and heating milk, froth thin foam.
III. Only heating separately, without frothing.
IV. Only frothing separately, without heating.
Note:

• Before using your milk frothier, clean all the parts according to the section “CLEANING AND MAINTENANCE”.
• Do not use skim milk to froth, it can’t produce milk foam.
• Please use whole milk or semi-skimmed at refrigerator temperature to forth.( Whole milk is recommended, temperature: 6- 8°c

CLEANING AND MAINTENANCE

Always disconnect the milk frother from the power outlet before cleaning.
CAUTION:
Do not rinse the milk frothier surface.
Do not rinse the milk frothier base.
Do not immerse the jug in water.
All parts of this milk frothier are not dishwasher safe.

1. Take out the whisk, and rinse the whisk in warm water.
2. Clean the inner jug immediately after each use, or the milk foam will solidify on the jug. Rinse the inner jug with mild detergent and water and then wipe with a soft damp cloth.
3. Clean the lid with water and mild detergent. Rinse thoroughly and dry.
4. Wipe the surface with a soft damp cloth.

Capacity
The amount of milk to be heated or frothed shall be complied with the requirement shown in Figure. 1.

OPERATION OF MILK FROTHER

I. Warm milk froth (thick foam)

1. Place the appliance on a flat surface.

2. Then open the lid, insert the frothing whisk onto the shaft on the bottom of frothier.

3. Fill the frothier with the desired amount of milk, and cover with the lid.
   Note:
   To avoid milk overflowing after frothing, the max quantity for frothing milk is 150ml (5.1oz) (see Fig. 1), The min quantity for frothing milk is 75ml (2.5oz).
   Please use whole milk or semi-skimmed at refrigerator temperature (about 6-8 °C).

4. Connect the plug to the power supply.

5. Press the FUNTION button once, the working indicator of “Warm milk froth (thick foam)” will flash. Then press the ON/OFF button, the frothier will start to work. Once it is finished, the frothier will stop.
   Note: During operation, you can stop frothing by pressing the ON/OFF button once.

6. When the frothier has stopped operating, open the lid, pour out the warmed and frothed milk to enjoy it.

7. Always turn off the milk frothier and disconnect the power supply when not use.

II. Warm milk froth (thin foam)

1. Place the appliance on a flat surface.

2. Then open the lid, insert the frothing whisk onto the shaft on the bottom of frothier.

3. Fill the frothier with the desired amount of milk, and cover with the lid.
   Note:
   To avoid milk overflowing while frothing, the max quantity for frothing milk is 150ml (5.1oz) (see Fig. 1), The min quantity for frothing milk is 75ml (2.5oz).
   Please use whole milk or semi-skimmed at refrigerator temperature (about 6-8 °C).

4. Connect the plug to the power supply.

5. Press the FUNTION button twice, the working indicator of “Warm milk froth (thin foam)” will flash. Then press the ON/OFF button, the frothier will start to work.
   Once it is finished, the frothier will stop.
   Note: During operation, you can stop frothing by pressing the ON/OFF button once.

6. When the frothier has stopped operating, open the lid, pour out the warmed and frothed milk to enjoy it.

7.  Always turn off the milk frothier and disconnect the power supply when not use.

III. Heat milk

1. Place the appliance on a flat surface.

2.  Then open the lid, insert the frothing whisk onto the shaft on the bottom of frothier.

3. Fill the frothier with the desired amount of milk, and cover with the lid.
   Note: To avoid milk overflowing while heating, the max quantity for heating milk is 300ml (10.2oz) (see Fig. 1), The min quantity for heating milk is 75ml (2.5oz).

4. Connect the plug to the power supply.

5.  Press the FUNTION button three times, the working indicator of “Heat milk” will flash. Then press the ON/OFF button, the appliance will start to work. Once the temperature of milk has achieved the setting value, the frothier will stop working;

6. When the frothier has stopped operating, open the lid, pour out the warm milk and enjoy it.

7. Always turn off the milk frothier and disconnect the power supply when not use.

IV. Cold milk froth

1. Place the appliance on a flat surface.
2. Then open the lid, insert the frothing whisk onto the shaft on the bottom of frothier.
3.  Fill the frothier with the desired amount of milk, and cover with the lid.
   Note:
   To avoid milk overflowing while frothing, the max quantity for frothing milk is 150ml (5.1oz) (see Fig. 1), The min quantity for frothing milk is 75ml (2.5oz).
   Please use whole milk or semi-skimmed at refrigerator temperature (about 6-8 °C).
   4. Connect the plug to the power supply.
   5. Press the FUNTION button four times, the working indicator of “Cold milk froth” will flash. Then press the ON/OFF button, the frothier will start to work. Once it is finished, the frothier will stop.
   Note: During operation, you can stop frothing by pressing the ON/OFF button once.
   6. When the frothier has stopped operating, open the lid, pour out the cold and frothed milk to enjoy it.
   7. Always turn off the milk frothier and disconnect the power supply when not use.

CAUTIONS

1. At least 3 minutes to rest between 2 continuous cycles, otherwise, the frothier will enter self-protection state automatically after working for 5 cycles continuously, the working indicator will flash and the switch button will not be activated. After about 5 minutes, the frothier will enter standby state and you can continue to operate it.
2. Please clean the frothier according to the section “CLEANING AND MAINTENANCE” after using.

SPECIFICATION

TROUBLES SHOOTING

frothier and place again on the base
No power in the socket| Check the electric circuit
Problems with electric elements| Repair
Stop working after the device starts| Temperature of machine body is too high| Rinse the inside of body with cold water to reduce the temperature
Milk frothier damaged with immersion in water| Repair
Motor doesn’t work| Milk frothier is not cleaned in time after use, milk locks
the mechanism| Clean and move the shaft sleeve of motor by hand to loosen it
Motor damage| Repair
No heating| Machine damage| Repair
Charring| Dosage of milk either too little or too much| Use the dosage of milk according to the dial
Milk frothier reused without cleaning| Cleaning in time after use
The actual use voltage is significantly higher than the rated voltage| Use the appropriate voltage
Milk foam is not up to standard| Wrong milk type or temperature (about 6-8 °C)| Make sure to use whole or semi-skimmed milk at refrigerator temperature
The whisk is not inserted| Make sure to insert the whisk
Body reused without cleaning| Make sure the body is clean

PACKING LIST

• YISSVIC milk frother x 1
• Whisk x 2
• Spatula x 1

UL SKU:005742
UK SKU:005743
UL Model:MK1000-UL
UK Model:MK1000-GS
Made in China

Documents / Resources

| YISSVIC MK1000-UL Electric Milk Frother Cappuccino 4 in 1 Frother [pdf] Instruction Manual
MK1000-UL, MK1000-GS, MK1000-UL Electric Milk Frother Cappuccino 4 in 1 Frother, MK1000-UL, Electric Milk Frother Cappuccino 4 in 1 Frother, Frother Cappuccino 4 in 1 Frother, 4 in 1 Frother, Frother
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>