YISSVIC 183PCS Watch Repair Tool Instruction Manual
- June 14, 2024
- YISSVIC
Table of Contents
Watch Repair Tool
Manual
Watch Case Holder
This is the black item in this watch repair tool kit, which is used for
holding the watch.
It can be used to hold the watch then use screwdrivers to open the lid of the
watch.
Adjustable Case Opener and Watch Case Opener Accessories
First, select the same 3 black pegs (Watch Case Opener Accessories) on the
adjustable case opener, open the screw cover.
Then, you need to set the wrench to the correct size. To achieve this ensure
that the fixed black peg at the end of the tool is firmly screwed down into
position.
Next, with the match facing down on your table or bench, located the fixed
peg in one of the notches and slide the moving peg into position in the
opposite notch (in direction of arrow). It is worth spending a moment to set
this up as accurately as possible. Once confirmed, tighten the second peg to
hold it firmly in situ. And so as the third peg.
Now to unscrew the case: Hold the watch firmly and gently, applying pressure
to the wrench in a counter-clockwise direction. Due to the gasket and any dirt
and debris, the friction between case and watch back is quite high. Gradually
build up the pressure you are exerting until the back starts to move. Usually
it will give away quite slowly, as opposed to a jam-jar lid which tends to
release all of a sudden.
Once it has been loosed enough, you will be able to take the back off using
your fingers.
Blue Screwdriver
There are 5 Screwdrivers in different sizes for in the watch repair tool set,
which have been stored in the blue screwdriver.
You can unscrew the end of blue screwdriver handle, the 5 different standard
screwdrivers head could be taken out.
You can choose correspondent size screwdriver head then install that into the
blue drill to disassemble the screws on the watch.
Tweezer
There is a long tweezer in the watch repair tool kit.
It is used to clamp small objects inside the watch such as pin punches, small
screws, watch hands, etc.
Metal Watch-band Link Pin Remover
When disassembling watch strap fixing pins, it is mainly used for removing
pins on the watchband.
When you need to adjust the length of your watch bracelet, this is the tool
that will be handiest. It makes it easy to take out links so that you can
adjust or repair your watch band to get the best fit.
To use this tool so that you can push a pin out of the bracelet, begin by
placing your watch band on the watch band link pin remover, making sure that
it is lined up with the link that you want to remove. A turn of the handle
will squeeze the pin out of its housing, removing the link pin
easily.
Pin punches
Itis mainly used for removing pins on the watchband,
These repair kit comes with three pin punches in various sizes.
Removing the pins from a watch can be tricky, considering that the pins are
often miniscule, cylindrical, and challenging to grip, with a pin punch this
job will be considerable easily.
Case Knife
It is the one fat knife in orange, which is used for opening the bottom cover
of the pressing type watch.
This is also known as a Watch Case Opener, and is the first tool that you will
use from your watch repair kit. Once you decide to repair your watch, you need
to open it to see what is happening inside. This results you to take off the
back case of the watch. A watch case opener is for use with watches that need
to be levered off. ‘
As you prepare to use this tool, you will notice that the blade is short and
‘stubby. This allows for more piece contact with your watch and avoids the 1
blade bending, as would happen using a penknife. It is also purposefully made
blunt, to avoid any mishaps.
Spring Bar Pin with Scale
This is the small double-ended tool with scale (One end with a blunt probe and
the other with a small fork)
when you want to make adjustments to your watch bands or bracelets, you often
have to separate them from the watch casing to complete the adjustments.
This is where you will come in contact with the spring bar removal tool.
The pointed end is used to remove the pins, and the forked end is used to gain
access those awkward areas which are hard to reach next to the strap.
It is very convenient for the spring bar pin coming with the scale. You could
measure anything when you repairing the watch.
Watch Band Holder
This is the tool for holding the watch bands.
You could use this tool to fix the watch band first, then start to repair the
watch band part. Hinge Pin Lugs
YISSVIC Watch Repair Tool is coming with 144 hinge pin lugs: 18 standard types
and there are 8 pin lugs of every types.
This is the needles to connect watch bands.![YISSVIC 183PCS Watch Repair Tool
- Simply](https://manuals.plus/wp-content/uploads/2023/11/YISSVIC-183PCS- Watch-Repair-Tool-Simply.jpg)This product is portable and convenient to be stored, simply to meet the maintenance and assembly of watches.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>