YISSVIC 006438 Camping Sleeping Pad User Manual
- June 15, 2024
- YISSVIC
Table of Contents
YISSVIC Camping Sleeping Pad
User Manual
Please read the manual carefully before use. The color of the pictures in the manual is for reference, and it is subject to the actual order!
INFLATION
Two Ways to Inflate
-
Inflate with the air valve on the bottom
A. Before inflating, please close the air valve on the pillow.
B. Open the valve of the air pump and inflate by stamping/pressing on the built-in air pump and it can be inflated in 2-3 minutes.
C. The feet are placed horizontally to cover the entire inflation valve, so that the air pump has the largest force area, the fastest inhalation speed, and the shortest inflation time. Pressing it with your hands or placing the foot vertically, the force area of the air pump is small, cause slow inhalation speed and long inflation time. Note: In this way,the sleeping pad can only be inflated by stepping on or pressing it with your hands, not blowing with your mouth or using air pump to inflate! -
Inflate with the valve on the pillow
A. Before inflating, please close the air valve on the bottom.
B. Open the first layer of the air valve on the pillow to inflate with an air pump or mouth. 1. Inflation valve
2. Deflation valve
C. After fully inflated, close the air valve on the pillow.
Note:
Before use, press the valves at both ends again to prevent air leakage!
DEFLATION &STORAGE
-
Open the second layer of the air valve on the pillow to deflate. 1. Inflation valve
2. Deflation valve
Note: Open the first layer of air valves to inflate with an air pump or mouth, and open the second layer to quickly deflate! -
Fold the sleeping pad lengthwise with the air pump in middle. Note: When folding, do not cover the 3 valves on the sleeping pad, open it directly to prevent the valve from being deformed and affect the service life of the valve.
-
Start to roll up towards the pillow from the air pump.
-
Store it up with the attached storage bag.
CONFIRMATION OF LEAKAGE
- Close the valves at both ends with full air. After wetting the surface with water or dilute soapy water, press down with your knees to pressurize with your body weight. The bubbling area is the leaking area. Please mark it and after dry it, stick the leaking position with adhesive tape.
- Fill the product with air and put it in a container filled with two-thirds of water for testing(such as swimming pool or bathtub). Press the inflatable pads into the water and the leaking position will bubble. Mark the leaking position and dry it. Stick the leaking position with adhesive tape after drying.
CLEANING
Inflate the sleeping pad to the maximum limit, close the valve tightly, use a
soft brush and low-irritating household degreasing detergent or lotion to
rinse thoroughly with water, and store after it is completely dried.
Note: Do not machine wash or use a rough brush, it will damage the air
tightness of the inflatable sleeping pad.
PRECAUTIONS
- Keep away from sharp objects (such as thorny plants, sharp stones or blades).
- If you don’t use a tent, put a cloth under the sleeping pad to extend the life of the pad.
- Do not use the sleeping pad as a float.
- Keep away from fire or sparks.
- When the temperature is high, do not put sleeping pad that is inflated and close the valve in the car or tent to prevent thermal expansion.
- Do not let the sleeping pad get sunscreen oil or alkaline medicine.
- Do not expose to the sun for a long time, ultraviolet rays will slowly damage the surface material.
- Please place the sleeping pad out of the reach of pets, pet nails will scratch it.
- Do not sit on the air pump of the pad while resting, it will damage or deform the air pump by gravity.
- The air nozzles at both ends are hard and should be avoided when resting to prevent damage to the valve or personal injury.
- Keep the storage bag out of the reach of children to prevent suffocation caused by children playing.
TROUBLESHOOT
-
Slight air leakage
A. Be careful not to kick or loose the valve on the bottom of the pad.
B. Check whether the valves at both ends are closed, and then use it after pressing firmly.
C. Please check if the pad is damaged.The damaged place can be reused after sticking it with adhesive tape. -
Failure to fit in the storage bag
After folding, press the air pump hard and then roll it toward the pillow, which can remove more air and make it easier to store.
WARNING
Maximum Load 350kg
MADE IN CHAINA
Documents / Resources
|
YISSVIC 006438 Camping Sleeping
Pad
[pdf] User Manual
006438 Camping Sleeping Pad, 006438, Camping Sleeping Pad, Sleeping Pad, Pad
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>