CREATE AIR PURE Air Purifier User Manual
- June 17, 2024
- CREATE
Table of Contents
CREATE AIR PURE Air Purifier User Manual
Thank you for choosing our air purifier. Before using the appliance, and to ensure the best use, carefully read these instructions. The safety precautions enclosed herein reduce the risk of death, injury and electrical shock when correctly adhered to. Keep the manual in a safe place for future reference, along with the completed warranty card, purchase receipt and package. If applicable, pass these instructions on to the next owner of the appliance. Always follow basic safety precautions and accident-prevention measures when using an electrical appliance. We assume no liability for customer failing to comply with these requirements.
SECURITY INSTRUCTIONS
When using any electrical appliance, basic safety precautions should always be observed.
- Cleaning the unit while it is plugged may result in electric shock, electric spark and serious injury. Unplug the unit before cleaning or maintenance.
- Do not operate the unit if the cord or plug are damaged. Doing so can result in electric shock. Discard the damaged unit or take it to an authorized service facility for examination and/or repair.
- Do not run the cord under carpeting. Do not cover the cord with rugs, runners or similar coverings. Do not place the cord under furniture or appliances. Arrange the cord away from traffic area and where it will not be tripped over.
- Only use the air purifier as described in this manual.
- Do not handle the unit with wet hands. Thoroughly dry your hands before handling any part of the air purifier.
- Hair, loose clothing and body parts can get caught in the machine resulting in injury. Keep hair, loose clothing and body parts away from openings and moving parts.
- Do not unplug by pulling the cord. Doing so may result in electrical spark or fire, Unplug the unit by grasping and pulling the plug.
- Do not use an extension cord.
- Do not place the air purifier near sources of heat, such as: stove tops, ovens, radiators or computers.
- Unplug the appliance from the power supply before servicing.
- This equipment should be inspected frequently and the dirt that has been collected should be removed regularly to prevent excessive accumulation that may result in flashover or fire.
- Do not use the air purifier outdoors or on wet surfaces.
- Do not use the air purifier in an enclosed space where flammable, combustible or explosive gases are present.
- Do not use in an area where toxic vapours, flammable dust or oxygen tanks are present. Check the location and make sure these elements are not present.
- Do not place open flames, including candles, directly in front of the air purifier.
- It is important to keep all objects away from the air intake grille.
- Place the air purifier on a flat, solid, stable surface. Always allow 38 cm of clearance on all sides of the purifier. Never place the unit on soft surfaces such as a bed or sofa.
- Place the air purifier so that the dirty air is not drawn across your head or body while sitting or sleeping.
- Place the air purifier so the plug on the power cord easily reaches a standard electrical outlet for a polarized plug.
- Children should be supervised when the product is in use. Do not allow children to play on or near the air purifier. Keep children’s hair, loose clothing, and body parts away from or out of the intake grill, bents, holes, or openings.
- This product is suitable for use with solid-state speed controls.
- Do not let the cord hang over the edge of a table or counter.
PARTS LIST
- Ambient lighting and air outlet
- Control panel
- Housing
- Air inlet
- Power cord
- Filter set
- Bottom base
FEATURES AND OPERATION
NEGATIVE IONS
Negative ions abound in our natural environments such as forests, waterfalls, mountains and the seaside. Negative ions are useful for enhancing the metabolism and homeostasis of the human body. This air purifier is equipped with a negative ion generator that can produce abundant negative ions by means of electric simulation.
MULTIPLE AIR PURIFICATION
3 stages filter system: PP filter to collect big dust particles and to prolong the lifetime of the HEPA filter. Pure 99.97% HEPA to filter the floating particles as small as 0.3 microns and pollen with little wind resistance. Efficient activated carbon filter to eliminate the strange odour, to filter the methanol and TVOC.
OPERATION
Before getting started, flip over the machine to reveal the filter cover.
- Turn the filter cover counterclockwise to unlock position and remove the cover.
- Take out the filter and remove it from its plastic packaging.
- Reinstall the filter. Make sure the pull tabs are facing outward.
- Replace the filter cover.
-
SPEED: The machine is working in middle speed as default after start working. By pressing SPEED, it changes to high speed and the speed indicator light is lit in high intensity. Press again and it will change to low speed, speed indicator light is lit in low intensity. Press for a third time and it changes to middle speed with white indicator light in low intensity. -
POWER: When the plug is connected, the power indicator light is lit. The ambient light is also lit and then turns off. It means the machine is in standby mode. Touch power, the ambient light is lit and the machine starts working in middle speed, speed indicator light is lit. Press power again and the machine will power off.
-
NEGATIVE ION: Press the negative ion button to start the function, the indicator light will be lit. Press the button again to stop the function.
-
NIGHT MODE: Long press the NEGATIVE ION button for 2 or 3 seconds until the ambient light turns off. Only the red light of the ON/OFF button will be on. The purifier will still be working while the night mode is on. Press any button to activate the light and display again.
FILTER CHANGE
When the machine accumulates 3000 hours working, the atmosphere light will start flashing slowly to remind the user to replace the filter. After replacing the filter, re-plug the power cord and let the machine in standby mode, touch the speed button for 3 times continuously and then long press for 2 seconds. The atmosphere light will turn on white after 5 seconds quick flashing. It means the filter has been changed successfully. Power on the machine and it will work normally.
HOW TO REPLACE THE FILTER
- Turn off and unplug the machine.
- Flip over the machine to reveal the filter cover. Turn the filter cover counterclockwise to unlock position and remove the cover.
- Remove the old filter.
- Remove the new filter from its polybag and place it into the machine with the pull tabs facing the opening.
- Replace the filter cover onto the housing, make sure the arrows on the housing and filter cover align. Turn the filter cover clockwise to the lock positon.
PROBLEMS HOOTING
PROBLEM | POSSIBLE CAUSE | SUGGESTED SOLUTION |
---|---|---|
**** Air purifier does not power on. | Unit is not plugged into an | |
electrical outlet. | Connect the plug to a powered electri- cal outlet. | |
Outlet is not working properly. | Try plugging the air purifier into a differ- |
ent outlet.
Power cord is damaged.| Immediately discontinue use and con- tact
Customer Support.
Air purifier is defective or malfunctio- ning.
Air purifier does not respond to button controls.| Air purifier is
not plugged into an outlet.| Connect the plug to a powered electri- cal
outlet.
Air purifier is defective or malfunctio- ning.| Immediately discontinue use and
con- tact Customer Support.
**** Air purifier makes an unusual noise while operating.| Air filters are
dirty.| Replace the air filter as instructed in the How to replace filter
section above.
Filter does not fit properly.| Properly place filter as noted in How to replace
filter section above.
Foreign object inside the unit.| Immediately discontinue use and con-
tact Customer Support. DO NOT attempt to open the air purifier.
**** Significantly re- duced airflow.| Filter packaging has not been
removed.| Remove filter from packaging before use.
Fan speed is low.| Adjust fan speed.
Filter needs to be replaced.| Replace the air filter as instructed in the How
to replace filter section above.
Not enough clearance on all sides of the purifier.| Ensure there is at least 38
cm (15 inches) of clearance on all sides of the purifier.
**** Poor air purification quality.| Room is too large for the air
purifier’s ap- plicable area.| Ensure the room is smaller than 12 m².
Air inlet or outlet is blocked.| Remove objects blocking air inlet or out-
let.
Filter not properly placed in housing.| Properly place filter as noted in
the Be- fore getting started and How to replace filter section above.
Filter reset button is still illuminated after replacing the air filter.|
The air purifier has been reset incorrectly.| **** See the Filter change
section on how to properly reset the unit.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction
of the use of dangerous substances in electric and electronic equipment as
well as their waste disposal. The symbol with the crossed dustbin shown on the
package indicates that the product at the end of its service life shall be
collected as separate waste. Therefore, any products that have reached the end
of their useful life must be given to waste disposal centres specialising in
separate collection of waste electrical and electronic equipment, or given
back to the retailer at the time of purchasing new similar equipment, on a one
for one basis. The adequate separate collection for the subsequent start-up of
the equipment sent to be recycled, treated and disposed of in an
environmentally compatible way contributes to preventing possible negative
effects on the environment and health and optimises the recycling and reuse of
components making up the apparatus. Abusive disposal of the product by the
user involves application of the administrative sanctions according to the
laws.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>