CLOUDY BAY CBOWCJB 18 Cubic Inch Old Work Ceiling Box Instruction Manual
- June 17, 2024
- Cloudy Bay
Table of Contents
CLOUDY BAY CBOWCJB 18 Cubic Inch Old Work Ceiling Box
**INSTALLATION INSTRUCTIONS
**
CBOWCJB18
Thank you for purchasing Coludybay Products
18 Cubic Inch Old Work Ceiling Box
PLEASE READ CAREFULLY BEFORE INSTALLING FIXTURE
Save these instructions, as you may need them at a later date.
-
Step 1: Cut Mounting Hole
For your safety, turn off the power before starting this project.
WARNING : Box is not Fan or Fixture weight rated. In addition, make sure that you check local codes for requirements.
Choose the right size hole saw, and cut a rough hole 4-3/16 inch with the below template in the package. Make sure that the hole is the right size by pushing the box into it. The box should be snug inside the hole. Adjust as required. -
Step 2. take down the ceiling box, then Insert 14AWG -12AWG sheathed wire into the ceiling box through V shape hole on top.
-
Step 3 Raise the box and insert it into the cutting hole, make sure it sits flush with the ceiling, use a manual Philips screwdriver or electric Philips screwdriver to tighten self-tap screws until the wing tabs lock the reverse side of the ceiling firmly, and the mounting flange has close contact with the ceiling.(See figure three)
Warning: If you use an electric screwdriver, make sure to adjust to speed and force to a medium level, or else wing tabs may deform or break.
Installation is completed.
QUESTIONS? COMMENTS? SUGGESTIONS? COMPLAINTS?
Please contact with us through
[email protected] or
[email protected] We will do our
best to make it right for you. Thank you very much!
GENERAL : All electrical connections must be under local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections, contact and obtain the services of a qualified electrician. use UL or IEC-approved wire only for input/output connections.
- Turn power off before installation, inspection, or removal. Use all necessary precautions while performing this procedure.
- Consult a qualified electrician to ensure the correct branch circuit conductor. Min 900C supply conductors.
- Properly ground electrical enclosure. THE OUTLET BOX MUST BE PROPERLY GROUNDED.
- DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS, OTHERWISE SAFETY WILL BE COMPROMISED.
PRODUCT CARE
After Sales Service
- Please discontinue using the product right away if the product shows any visible defect and contact customer service
- 1f there is any problem with our ceiling box for non-human reasons, please contact customer service, and we will send you a brand new replacement without the need to return goods or a full refund.
- If you are not completely satisfied with the product after installation but prefer not to disassemble it, contact us right away, and we will provide comparable compensation.
1-Year Limited Warranty
LIMITED WARRANTY: This ceiling box is warranted to be free from defects in workmanship and for up to I-year. Based upon reasonable household usage, when used per package and included instructions. If this ceiling box does not last for the period guaranteed, the manufacturer will send you a replacement ceiling box upon receipt Of the returned ceiling box, register receipt, and proof of purchase. To contact us, please email us at [email protected] to find out how to return the ceiling box. We are committed to making high-quality products. Returning the ceiling box will help us monitor and further improve product quality. This replacement is the sole remedy available, and LIABILITY FOR INCIDENTAL OR CONSEOUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED