Libratone Classic Beat User Manual
- June 13, 2024
- LIBRATONE
Table of Contents
Libratone Classic Beat
USER MANUAL
GET STARTED
1. POWER UP
Unpack Libratone Beat, insert power cable and turn on power. Libratone Beat starts in Standby mode and the Libratone Beat logo button color turns to RED.
2. INSERT TRANSMITTER
Insert transmitter into your iPad, iPhone or iPod.
(See the Owners Manual for connection to other audio sources)
3. PLAY
Start your iPod player, locate your favorite music and press Play.
4. CONNECT
Press the Libratone Beat logo button to connect to your transmitter. The logo button color will change to WHITE.
5. LISTEN
Libratone Beat is now playing.
Walk around or sit back.
Just enjoy …
CONGRATULATIONS!
YOU HAVE TAKEN A LEAP OF FAITH. A step towards a world of wireless bliss. It takes a great deal of courage to liberate yourself from the chains of speaker cables and ordinary stereo systems. But you have jumped right into it. FOR THIS WE SALUTE YOU.
We have done everything in our power to make your Libratone Beat speaker as simple and user friendly as possible. Hopefully this manual will answer any questions you might have.
Thank you for buying our product. Thank you for joining our movement.
APPLE COMPATIBILITY
Libratone Beat is for everyone and anyone who wants to set their music free. To make this happen compatibility is a top priority for us. Check out the list of icons to see if you’re all set.
iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. iPad is a trademark of Apple Inc.
PLACEMENT
You can place Libratone Beat just about anywhere you like and get the
FullRoom™ stereo perspective. Still, a bit of good advice won’t hurt:
If you place Libratone Beat against a hard backdrop with about 20 cm of air,
you allow the sound to reflect of the wall. This gives you a deeper bass and
an even fuller soundscape.
If you place Libratone Beat in a corner close to the walls, it takes the edge
of the FullRoom™ stereo experience. We won’t recommend it, but you are your
own master.
CONNECT 30-PIN
Connecting with the 30-pin transmitter is easy as pie. Just plug it in your iPod, iPhone or iPad and press “play” on the device.
If you have several Libratone Beat speakers in your house, the sound will follow you around. When the speakers detect the transmitter, they will automatically start playing after a few seconds.
The 30-pin transmitter has a range of up to 10 m in open space. If you’re out of range, Libratone Beat stops playing. When you’re back in range, it starts playing automatically.
Remember: You need to bond your Libratone Beat speaker with the transmitters you use. But only the first time you use them.To “bond” means putting a transmitter on Libratone Beat’s list of known sources.
The very first time you want to bond a transmitter with your Libratone Beat, you press the button on the speaker once.
To add additional new transmitters press the button twice and add them to the list of known sources.
CONNECT USB
You can liberate the music from your PC/MAC without blinking. Just follow these simple steps:
1. Plug the USB transmitter in your computer.
2. Make sure that your Libratone Beat is listed as “SKAA USB TX” sound source
in the control panel on your PC/MAC.
For the most part this will happen automatically.
3. Play your music, audio books, movies or games.
4. Press the button on your Libratone Beat to bond, if you haven’t used the
transmitter before. This makes it a known source.
(Press once if it is the first trans-mitter you use with your Libratone Beat.
Twice if it’s not).
The range of the transmitter is up to 30 m in open space.